Used material testing for sale (475)

Year of construction: 2011, condition: good (used), Glass plate 6 cameras with illumination Iedoyu Ivnepfx Abceap Two hoppers + one drive unit Integrated supply bunker 25 L / 50 kg with control unit Skako Bunker 125 Loader for 10 crates Extra lens TC1224 + holder Extra lens TC23056 + holder without UPS

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Iasdpfxex Ekups Abcsp Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components Iaedpfxehh H Hie Abcop 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Iedoyu Rhgopfx Abceap

Condition: excellent (used), CTS Type: C-40/350 Ex/l Water-cooled climatic test chamber ATEX Zone 1 The Ex/l designation indicates that this climatic test chamber is suitable for use in potentially explosive environments of Zone 1. This means it is designed for operation in areas where explosive atmospheres may be present. Such equipment is specifically built and tested to ensure safety in these environments. Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ‡0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % rH over time The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical specification: Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert shelf: Stainless steel, support area 620 x 600 mm Iaodoygui Sepfx Abcep Load per shelf max. 35 kg Total load with max. shelf configuration: 100 kg Control: 32-bit controller LCD control panel Digital display of setpoints and actual values Numeric input of setpoints Clear text error messages RS 232 interface Ethernet interface Free switching channels for custom test specimen control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1900 mm × Width 1000 mm × Depth 2300 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Condition: used, Hegewald & Peschke Material Testing Machine inspeKt 5 "table blue" + Long-Travel Extensometer MFX 200 For sale is a material testing machine from Hegewald & Peschke (Germany) with integrated long-travel extensometer, type MFX 200. The system is from a laboratory environment and was used for tensile testing and material analysis. ⚠️ Important Notice: The control and regulation electronics (the blue control box) are not included. Therefore, the machine is being sold for spare parts, as a project device, or for retrofit purposes. Iasdpfx Ajyux S Tobcjp The manufacturer has confirmed that retrofitting with a new control unit is generally possible, but may be costly. Ideal for: - Universities - Testing laboratories - Mechanical engineering - Spare part recovery - Retrofit projects Description / Function: The Hegewald & Peschke inspeKt series is a high-quality universal material testing machine for performing mechanical tests on materials. Typical tests: - Tensile tests - Compression tests - Material elongation - Fracture elongation - Determination of modulus of elasticity (E-modulus) - Stress-strain analysis The integrated long-travel extensometer MFX 200 measures the length change of the specimen precisely during tensile tests, enabling accurate determination of material properties. Machines in this series are used in: - Material research - Quality control - Plastics and metals testing - Universities and testing institutes Technical Data: Manufacturer: Hegewald & Peschke Meß- und Prüftechnik GmbH Machine: inspeKt 5 – table blue Extensometer: MFX 200 long-travel extensometer Year of manufacture: 2011 Article number: 15-100-031 Serial number: 15031101 Power supply: 230 V / 50–60 Hz Measuring device manufacturer: MF Mess- & Feinwerktechnik Velbert Machine type: Universal material testing machine Dimensions and weight (approx.): Height: approx. 150–170 cm Width: approx. 60 cm Depth: approx. 60 cm Weight: approx. 120–180 kg Important Note: "The table shown in the pictures is not included in the sale." Condition: - Very good laboratory condition visually - Complete mechanical assembly - Control unit / electronics missing - Sale is explicitly as a spare parts donor or for retrofit purposes - Scope of delivery as shown in the photos (Subject to technical changes and errors!) Feel free to contact us by phone with further questions.

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Ijdpoyc Igvofx Abcsap Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Ijdpsyr R Uhjfx Abcsap Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Iaodjx Eabpepfx Abcsp Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) Iaedpfx Abex Eaxbjcsp (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) Iaedpfx Abex D Abpocsp - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: Iodpfx Aevx S Hhobcsap - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Iedevx Nfbjpfx Abcsap Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Weiss Iaodpfx Abeuvi R Aecsp Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Humidity tolerance: +/- 5.0% r.H. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Ijdpfxouvi Nfj Abcjap Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone. Ijdpeuviydofx Abceap

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Isdpjklv H Iefx Abcoap Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Iodpfxouvipws Abcsap Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Isdpfx Aeuviumsbceap Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Iasdpfx Ajvtl Hqobcsp Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation Iaodpfjygvw Rex Abcsp - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Iaedeixtitjpfx Abcsp Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Iedevb Hanopfx Abcoap Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread Iodpfevb E Uqjx Abcjap - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description Isdex Anipepfx Abcjap This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.