Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm Rodpfxjyccvfj Aazon -Weight: 3.2 kg

Year of construction: 2021, condition: excellent (used), Weiss Rjdoycvd Njpfx Aazjn Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone. Rjdeycvdispfx Aazen

Condition: used, Year of construction: 2014, 3D Coordinate Measuring Machine Including software / PC / travel-box - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: R04 - Control: Conventional Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Rjdpfjwku Hyex Aazjn

Condition: used, Spectro SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx for professional metal and alloy analysis. The device is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, as well as various non-ferrous alloys. It is a proven industrial instrument widely used in foundries, laboratories, and quality assurance departments. Technical Data: Device Information: Device type: Optical Emission Spectrometer (OES) Manufacturer: SPECTRO / AMETEK Model: SPECTRO MAXx Design: Benchtop device Electrical Specifications: Power supply: 115 / 230 V AC Frequency: 50 / 60 Hz Power consumption during measurement: approx. 400 VA Power consumption in standby: approx. 180 VA Fusing: 16 A (slow-blow) Gas Supply: Operating gas: Argon (Ar) Argon purity: min. 4.8 (99.998%) Redpfx Aasybcfkezsn Input pressure: approx. 7 bar Argon consumption: Stand-by: approx. 6 l/h Constant operation: approx. 23 l/h Analysis mode: approx. 200 l/h Ambient Conditions: Operating temperature: +10 °C to +30 °C Humidity: 20–80%, non-condensing Dimensions & Weight: Dimensions (W × D × H): approx. 600 × 740 × 460 mm Weight: approx. 60 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals & software media (Errors and changes in the technical data, as well as prior sale, reserved!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Rjdpfx Asybbqxsazjn Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 640 h, The configuration consist of - ATOS Compact scan (measuring head) - Picture creation PC7810.S - Industial stand - GOM Scan Software Rodpfevpu U Aox Aazen - GOM Inspection software The condition is new and barely used.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: Redpfx Aajya Ev Nozsn For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Rjdpfx Asx Eabpsazen Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): Rsdjx Eaxbjpfx Aazon - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH Rjdpox D Abpefx Aazon - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: used, HEIDENHAIN Rotary Encoder Incremental Angle Measuring Device Type: ROD 285C 18000 03S12-03 Rodpfx Asx Nqvueazsn ID 358 699-01

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Keyence VL-700 optical coordinate measuring machine. Item for sale: 1 x Keyence VL-700 with the following equipment: Includes laptop with application software Includes calibration plate Rsdpfjyamwnjx Aazsn Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Rodjrt U Nujpfx Aazon Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: Rodpfx Aeyamzaoazon "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 300 kg, The machine is in mint condition, barely used. Complete set with PC and work desk. Redjxr Ulpjpfx Aazsn

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FTB-4PRO-S1-128G, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, type plate available, Features of the FTB-4 Pro: * Quad-core processor * 4 GB RAM * Windows 10 * Color touchscreen display * 1280 x 800 TFT * Diagonal: 256 mm (10.1 inches) * Internal memory: 128 GB (flash) * Rechargeable Li-ion batteries (optional) * Interfaces: o 1x RJ45 LAN 10/100/1000 Mbit/s Rsdpfx Aaoydv Idjzsn o 2x USB 2.0 ports o 1x USB 3.0 port o 1x display port o 1x headphone/microphone jack * Dimensions (H x W x D): 199 mm x 333 mm x 170 mm * Weight (without batteries and modules): 4.6 kg * X-720C-Q1-QUAD-EI-EA – TK-y SM/MM OTDR module * EUI-95 * FTBX-882260-10G 10M to 100G Multi-Service Power Blazer test module * GIGE-Bundle – Option 100 Optical + GigE option * 10GIGE – enables the 10GigE LAN/WAN interface * OTN option pack * OTDR + intelligent Optical Link Mapper base software * iOLM Pro * FP435B-V2-APC – Wireless Analysis Digital Video Inspection Probe, MF Ready * FIPT-400-MF Automated Multi-Fiber Tip UPC for MPO * FID-31 R Fiber Identifier * Including transport case

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Redpfx Aasxn Ax Ajzsn

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Rjdpjxv Nkuofx Aazjn Description: Year of manuf. : 2024 Control : Sonstige In General: Year of manufacture:2024 Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Year of construction: 2001, operating hours: 1,00,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Nominal current: 26 A Rsdjyfud Tspfx Aazjn Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Rsdpfjyft Tmex Aazen Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: #4C0N000333, type of input current: AC, total width: 449 mm, total length: 557 mm, total height: 614 mm, overall weight: 35 kg, Equipment: type plate available, Item description: Keyence IM-8030T measuring system Including measuring head, control unit, rotation unit IM-RU1, 3-jaw chuck, 2-jaw chuck, keyboard, mouse, manual, etc. Technical specifications will follow shortly. Rsdpfsyf H S Njx Aazjn ----- Item condition: The item is in very good condition and can be inspected at any time by appointment. Safe transport is ensured as all original packaging materials are available.

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Rsdpfx Aajyaatpjzjn Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 1999, condition: used, 25 bar, refrigerant R404, 4.2 kg, 11.5 kW Technical data Dimensions (L x W x H) approx. 1880 x 1850 x 1380 mm Rjdpfxjyfpf Ss Aazen Weight approx. 840 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: TN52120936-08, total width: 1,000 mm, total length: 1,700 mm, total height: 1,800 mm, overall weight: 700 kg, TESA TESASCAN 52 length measuring device - Measuring range up to approx. 300 mm Attention: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. Redpsx T Anqofx Aazon FCA D-78087 Mönchweiler – loaded onto truck