Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, type plate available, Very good condition, original software including hardware key. Renishaw measuring probe. Bwedpfx Abjzw Rpnstet Direct sale to end-user only.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed Bwjdodz Srbspfx Abtet - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, Year of construction: 2021, X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible. Bodpfx Abjzyq Szjtjwt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale is a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. The laser scanner has a current calibration. Ideally suited for 3D measurement technology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ Bedpfjzxz Ikox Abtewt 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for the measuring arm Separate transport case for the scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, immediately ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used directly for professional measurement tasks. The MCAx30+ offers high flexibility in mobile 3D measurement technology due to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both classical tactile measurement and the rapid, non-contact acquisition of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measurement package. Inspection and functional testing are possible after prior arrangement. The sale is preferably as a complete system. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Condition: used, Scale with maximum capacity of 6 tons, minimum 40 kg, overall dimensions 610 x 110 cm, h. 90 Bwodsy Ud Tdjpfx Abtet

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Bwjdpfxey Ta A Es Abtjt Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 * Ideal for quality assurance, reverse engineering, tool and mold making Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Subject to prior sale and errors excepted.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Bedpfxszwk Nbe Abtowt

Condition: ready for operation (used), Elektra Tailfingen PST 3.1-SIA-B – Electrical testing panel You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Bwsdpfx Abjzyrzdjtst Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the product description may occur and are subject to change.

Condition: ready for operation (used), Elektra Tailfingen – Electrical Testing Panel – Electrical Panel You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Bwjdpfx Aozyrpzebtet Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Hommel Etamic W20 Jenoptik Waveline Roughness Tester, Measuring Device (562) Measuring range: max. 20 mm Measuring span: ± 300 µm Accessories: Tripod Granite measuring plate PC You are welcome to visit us for an inspection. Bjdszyqzcepfx Abtowt We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2020, condition: like new (used), With automatic feeding and removal. Workpieces are fed in as bulk material, inspected, and defective parts are sorted out. Good parts are then transferred as bulk material into containers. Workpiece: Bolts, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - High-resolution matrix camera (21 Mp), dimension measurement - Line scan camera (4K), surface inspection Parts hopper SKAKO, 71 l volume Capacity: up to 125 kg Bsdpfx Abslpcm Rjtowt New price: €230,000

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). Bwsdpfxezb U Hao Abtet CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm.

Condition: excellent (used), IM-6600 measuring system IM-6120 measuring head CMOS sensor: 6.6 MP monochrome 10.4" display LCD color monitor Field of view: φ100 x 200 mm Bwsdpfxjzcd A To Abtot Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measuring accuracy: Wide-field measuring mode: ±5 μm High-precision measuring mode: ±2 μm Measuring mode with large field of view: ±7 +0.02L μm Measuring mode with fixed position: ±4 +0.02L μm Table: X-axis: 100 mm Z-axis: 30 mm Load capacity: 1 kg

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Bwodpfsywk Nqox Abtot Image sensor: B/W CMOS, 1", 20 megapixels Display: 10.4" LCD monitor (XGA: 1024x768) Measuring mode with wide field of view: 225 x 125 mm High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Bwjdpoyk Et Nofx Abtst Height: 355 mm Depth: 360 mm Rated temperature: 500° C

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 640 h, The configuration consist of - ATOS Compact scan (measuring head) - Picture creation PC7810.S - Industial stand - GOM Scan Software - GOM Inspection software Bwjdpfxjvpu U Aj Abtet The condition is new and barely used.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Bwsdjzx Dwnopfx Abtot Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Bjdpfx Abjzk I T Rstjwt Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Year of construction: 2018, condition: excellent (used), functionality: fully functional, BINDER MKF240 Climate Test Chamber – 247 Liters | -40 °C to +180 °C | 10 % to 98 % RH For sale is a high-quality Binder MKF240 Climate Test Chamber in well-maintained condition. The unit is designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. With an internal volume of approximately 247 liters, a temperature range of -40 °C to +180 °C, and a humidity range of 10 % to 98 % RH, the MKF240 is ideally suited for environmental simulation, temperature cycling, aging studies, material testing, and reliability testing. The stainless-steel interior and efficient air circulation system ensure uniform temperature and humidity distribution throughout the chamber. The integrated viewing window allows continuous observation of test specimens during operation. Technical Data Manufacturer: Binder GmbH Model: MKF240 Type: Climate Test Chamber Temperature Range: -40 °C to +180 °C Humidity Range: 10 % to 98 % RH Internal Volume: Approx. 247 Liters Stainless-Steel Interior Dynamic Air Circulation System Viewing Window Programmable Controller Made in Germany Applications Electronics Industry Automotive Industry Bedpfx Aszdqytsbtjwt Aerospace Industry Material Testing Research & Development Quality Assurance Reliability and Aging Tests Key Benefits ✓ Combined temperature and humidity testing ✓ Precise environmental control ✓ Excellent temperature and humidity uniformity ✓ Robust industrial construction ✓ Ideal for laboratory and production environments Condition The unit is in good used condition. Inspection and functional testing are welcome by appointment. Additional photographs and technical information are available upon request.

Condition: excellent (used), functionality: fully functional, WEISS C-340/70 CLIMATE TEST CHAMBER – 340 LITERS | -70 °C TO +180 °C For sale is a high-quality Weiss Umwelttechnik C-340/70 Climate Test Chamber in very good condition. The chamber is designed for demanding environmental simulation, temperature cycling, quality assurance, research, and development applications. With an internal volume of approximately 340 liters and a temperature range from -70 °C to +180 °C, the unit is ideally suited for material testing, thermal cycling, aging studies, and qualification testing of electronic and mechanical components under extreme environmental conditions. The stainless-steel workspace features multiple shelf positions and a powerful air circulation system to ensure uniform temperature distribution throughout the chamber. The integrated touchscreen controller provides simple and intuitive operation. TECHNICAL DATA • Manufacturer: Weiss Umwelttechnik GmbH • Model: C-340/70 • Year of Manufacture: 2008 • Temperature Range: -70 °C to +180 °C • Internal Volume: Approx. 340 Liters • Nominal Power: 4.4 kW • Nominal Current: 13.0 A • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Refrigerant R404A: 2.5 kg • Refrigerant R23: 0.65 kg • Max. Low Pressure: 19 bar(g) • Max. High Pressure: 25 bar(g) • Static Pressure: 9.5 bar(g) • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller APPLICATIONS • Electronics Industry Bwodszdqhdepfx Abtjt • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance KEY BENEFITS ✓ Temperature testing down to -70 °C ✓ Precise temperature control ✓ Excellent temperature uniformity ✓ Proven industrial quality ✓ Robust and durable construction ✓ Suitable for continuous operation CONDITION The unit is in very good used condition. The interior is clean, shelving racks are installed, and the chamber presents itself in excellent overall condition. Inspection and functional testing are welcome by appointment.

Condition: excellent (used), functionality: fully functional, VÖTSCH VC7034 CLIMATE TEST CHAMBER – 340 LITERS | -40 °C TO +180 °C AVAILABLE IN AIR-COOLED OR WATER-COOLED VERSION For sale is a Vötsch VC7034 Climate Test Chamber in very good condition. The chamber is designed for professional environmental simulation, temperature cycling, quality assurance, research and development, and reliability testing applications. With an internal volume of approximately 340 liters and a temperature range from -40 °C to +180 °C, the unit is suitable for testing electronic components, automotive parts, aerospace applications, materials, and industrial products under controlled environmental conditions. The chamber features a stainless-steel workspace, dynamic air circulation system, large observation window, and user-friendly touchscreen controller. These features ensure reliable and repeatable test results while providing excellent accessibility and ease of operation. TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik • Model: VC7034 • Type: Climate Test Chamber • Temperature Range: -40 °C to +180 °C Bwodpszdpvaofx Abtot • Internal Volume: Approx. 340 Liters • Stainless-Steel Interior • Dynamic Air Circulation • Large Viewing Window • Touchscreen Controller APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance AVAILABLE VERSIONS AIR-COOLED VERSION The air-cooled version requires only a power connection and can be installed without additional infrastructure. Heat is dissipated directly into the surrounding air, making this version ideal for laboratories, workshops, and production facilities. Advantages: ✓ No cooling water connection required ✓ Easy and cost-effective installation ✓ Ready for immediate operation ✓ Flexible placement options WATER-COOLED VERSION The water-cooled version is connected to an external cooling water system. Heat is removed through a water-cooled condenser, reducing heat emission into the installation area. This configuration is particularly suitable for continuous operation and industrial environments. Advantages: ✓ Reduced heat load in the installation area ✓ Higher efficiency during continuous operation ✓ Ideal for 24/7 operation ✓ Suitable for industrial testing facilities CONDITION The unit is in very good used condition. The interior is clean, shelving racks are present, and the chamber is well maintained. Inspection and functional testing are welcome by appointment. Loading assistance can be provided if required. Additional photographs, technical information, and pricing are available upon request.

Year of construction: 2010, operating hours: 18,766 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 58566150370010, VÖTSCH VC7018 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR PRECISE TEMPERATURE AND HUMIDITY TESTING For sale is a high-quality Vötsch VC7018 Climate Test Chamber in very good condition. The unit is ideally suited for demanding temperature and humidity testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation and testing equipment, renowned for precision, reliability, and long service life. The VC7018 has been designed for reproducible climate and temperature testing and provides excellent temperature and humidity uniformity throughout the test chamber. The spacious stainless-steel workspace offers ample room for a wide range of test specimens and applications. Its powerful air circulation system ensures homogeneous climate conditions and reliable test results. The intuitive touchscreen controller allows simple and user-friendly operation. TECHNICAL FEATURES • Manufacturer: Vötsch Industrietechnik • Model: VC7018 • Type: Climate Test Chamber • Temperature Range: -70 °C to +180 °C • Humidity Range: 10 % to 98 % RH • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller • Heavy-Duty Industrial Design • Suitable for Continuous Operation APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance • Aging and Reliability Testing KEY BENEFITS Bwodpfx Abozdp Tletet ✓ Precise temperature and humidity control ✓ Excellent climate uniformity throughout the chamber ✓ High-quality stainless-steel workspace ✓ User-friendly operation ✓ Robust and durable construction ✓ Ideal for laboratory and production environments ✓ Proven Vötsch technology and reliability CONDITION The unit is in very good used condition. The interior is clean and the chamber is in overall excellent condition. Inspection and functional testing are welcome by appointment.

Year of construction: 1999, condition: excellent (used), functionality: fully functional, machine/vehicle number: 59566005650010, VÖTSCH VC4060 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR ENVIRONMENTAL SIMULATION For sale is a high-quality Vötsch VC4060 Climate Test Chamber in well-maintained condition. The unit has been designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation equipment and is renowned for precision, reliability, and long-term durability. The VC4060 is ideally suited for material testing, aging studies, reliability testing, and qualification of electronic and mechanical components under controlled environmental conditions. The stainless-steel interior, efficient air circulation system, and robust industrial construction ensure uniform temperature distribution and repeatable test results. The integrated viewing window allows continuous observation of test specimens during operation. TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik / Weiss Umwelttechnik GmbH • Model: VC4060 • Year of Manufacture: 1999 • Unit No.: 59566005650010 • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Nominal Power: 7.8 kW • Nominal Current: 15 A • Refrigerant: R452A, 3.5 kg • Max. Low Pressure: 18 bar(g) • Max. High Pressure: 25 bar(g) • System Plan No.: 67611041LB • Stainless-Steel Interior • Viewing Window • Dynamic Air Circulation System • Made in Germany APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development Bwsdpfx Abszdqmgstet • Quality Assurance CONDITION The unit is in good used condition. The interior is clean and the chamber presents itself in good overall condition. Inspection and functional testing are welcome by appointment.

Condition: used, Year of construction: 2015, Year of construction 2006 CNC controlled video measuring device Measurement software MeasureMind 3D Touch Probe TP200 PC system and 2 x TFT monitor Reflected light, transmitted light, Xoaxiallicht LED ring light Further equipment, software modules, probe changers and accessories optional. Installation and commissioning, individual training possible with us in Remscheid or at your location. Bwsdpfjzvl Sujx Abtot

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Bodpozxgmxsfx Abtewt Price: please request a quote.