Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions Tedpfx Abszpw Hdjteb The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Tedezuma Rspfx Abtob Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Tedpsztzm Nsfx Abteb Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Tjdpfsziiw Iex Abteb Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm Tsdpfeziizyox Abtjb - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Todpfxezii Aks Abtob Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. Tjdpfx Aozii Awjbtjb The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Tedpfjzii A Rox Abtsb For further questions, feel free to contact us by phone.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Tjdpfx Aozii Dhebteb Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit Todpfxezhadco Abteb LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Lindner Burst Test Stand We offer a Lindner burst test stand here. AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Tsdpfx Ajzd Sivsbtsb Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), LDS Shaker Special We are offering an LDS Shaker Special for sale. Shaker Vibration testing: Shaker – Type V870-640T Testing for vibration and shock resistance during use and transport. Tedpfxozd Slde Abtob Determination of vibration-related material parameters. Application areas: engine components, exhaust turbochargers, vehicle parts, electronic assemblies. Type: V870-640T Condition: used Scope of supply: (See images) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer you a Thermotron environmental test chamber. Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65º to 71ºC: 17 Heating time in minutes -65º to 180ºC: 43 Heating time in minutes -40º to 85ºC: 16 Electrical requirements in full load amps 230/3/60: 19 Electrical requirements in full load amps 230/1/60: 25 Electrical requirements in full load amps 220/1/50: 27 Cooling time in minutes 85º to -40ºC: 32 Cooling time in minutes 71º to -65ºC: 54 Cooling time in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used Todpjzd Snrofx Abtsb Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, Tsdpfxezd T Rhe Abtob research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Tjdpozd Ultofx Abtsb Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Active Cooling System We offer you an active cooling system here. Active Cooling System Type: EOL EMP 242 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) Tedpezd Uuzsfx Abtsb We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Super price reduction: 9,999! Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft, or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "stock photo" from a Taylor Hobson catalog, showing how it is constructed, except for the computer. It comes with a newer HP computer with a small form factor... Max. diameter: 350 mm Max. test part height: 500 mm (higher measurements are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece: +/- 5 mm Max. weight of test part: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets using a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws"... Shipping is at the buyer's expense and will be done on two Euro pallets... Tedpfxszcqy Ee Abteb The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is recommended after a few years... Errors can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget them, the system may be damaged when it starts up... A truly well-maintained, very accurate system that will provide many more years of excellent service!

Condition: excellent (used), Heraeus Vötsch Climate Chamber Here, we offer a Heraeus Vötsch climate chamber. Vötsch Climate Chamber VCS 7033, Water-Cooled Tedpfx Aozfy Rqobtjb Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% RH Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side feed-through: 90 mm diameter Approx. 330 L, Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerant: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Temperature Chamber We offer a Weiss temperature chamber here. Weiss temperature chamber, air-cooled with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temporal temperature deviation in the center of the useful space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough integrated in the standard configuration R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation of water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Tjdpfszfy Rwox Abteb Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the telephone.

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Tsdpfxszf E E To Abtsb Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Here we offer a fastening system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Tjdpfx Aszgabfsbtob We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: excellent (used), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: Tjdpfezgah Sox Abtjb External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Tedpfxjzgaipo Abtob Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Tedpfsza Dv Isx Abtjb Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Tedozg Er Aepfx Abtob Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.