Condition: excellent (used), Catalog number: 8102 TECHNICAL DATA - Shaft width: 510mm - Noise-reducing comb - Number of knives: 4 pcs - Table length: 2950mm - Cast iron tables - Both tables are adjustable - Original, adjustable angle fence - Motor: 5.5kW - Diameter of dust extraction outlet: 140mm - Dimensions (L/W/H): 2950x950x1300mm - Weight: approximately 1300kg ADVANTAGES - Made in Poland - Upper control panel - 4-knife shaft - DTR documentation - Used thickness planer - Very good condition Net price: 16900 PLN Net price: 4024 EUR, depending on the exchange rate of 4.20 EUR Ijdpfjzzqn Sex Ahneig (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Weinig Unimat 500 four-sided planer max. planing width: 230 mm max. planing height: 120 mm 6 heads Spindle 1 - 7.5 kW Spindle 2-3 - 11 kW Spindle 4 - 11 kW Spindle 5 - 11 kW Spindle 6 - 7.5 kW Iijdpfezxyvaox Ahneg Memory system control 40 mm spindles Feed controlled by an inverter Robust planer from WEINIG, machine inspected, well-maintained, in very good condition Machine dimensions: length 450 cm, width 200 cm

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake Iodpfjzx Sznsx Ahneig – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes Iedozy Np Espfx Ahneig CE

Year of construction: 2017, operating hours: 200 h, condition: used, functionality: fully functional, We are offering this used Marunaka SUPER MECA-S super surfacer / planing machine, year of manufacture 2017. Serial number: 1074 Manufacture date: 02.11.2017 Rated voltage: 380 V Phases: 3 Network frequency: 50 Hz Total power: 2.3 kW Main motor power (continuous): 2.2 kW Iiodpfx Aey Hdp Nshnsg Main motor speed at 50 Hz: 1,410 rpm Feed speed: 53 m/min Maximum working width: 250 mm Maximum working height: 300 mm Net weight: 430 kg The machine comes with the following optional features: - Increased pass-through height to 300 mm - Pressure roller for wide workpieces - Lateral infeed and outfeed tables - Includes 10 blades at EUR 50 each The machine has seen very little use and is in excellent condition. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm electric height adjustment 7.5 kW motor Iijdezxyu Aepfx Ahnsg star-delta start 380V power supply

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Iiodpfoz A Hhuex Ahneg

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 510 mm, number of blades: 4, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2017 - CE certified, operating manual included TECHNICAL SPECIFICATIONS - Working width: 510 mm - Number of knives: 4 - Knife dimensions: 510 x 30 x 3 mm - Rotational speed: 6000 rpm - Guide dimensions: 1360 x 200 mm - Guide angle: 90° - 45° - Max. chip collection: 8 mm - Motor power: 5.5 kW / 7.5 PS/hp - Shaft diameter: 100 mm - Table dimensions: 1155 mm, second table 1110 mm, total 2710 mm - Total length of the jointer tables: 2710 mm - Power supply: 3 x 400 V - Diameter of the dust extraction nozzle: 150 mm Iiedpfjzim U Dox Ahnsg - Machine dimensions: 2710 mm x 1000 mm x 1150 mm - Weight: approx. 800 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: K215202, working width: 120 mm, working height: 200 mm, overall weight: 3,500 kg, spindle speed (min.): 2,800 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: mechanical, type of input current: three-phase, For sale: Reignmac RMM520 four-side moulder, 5-head configuration, designed for efficient, high-volume processing of wooden components. The machine is fully operational, carefully prepared for immediate use, and ready to be commissioned by the new owner. The offer includes a complete line with additional buffer magazines at both infeed and outfeed, facilitating material handling and increasing productivity. Technical specifications: - Manufacturer: Reignmac (Reignmac Machinery Co., LTD) - Model: RMM520 - Type: Four-side moulder - Number of heads: 5 - Working width: 20 – 200 mm - Working thickness: 8 – 120 mm - Spindle speed: approx. 6000 RPM - Power supply: 380 V / 50 Hz / 3 phase - Total power: 28.6 kW - Weight: 3500 kg - Year of manufacture: 2010/08 - CE: Yes Feed speed: - Feed speed after upgrades: up to 45 m/min Technical condition: - Machine is 100% fully functional - Ready for operation - On-site inspection at Layman furniture factory recommended (possibility to test in operation) Included equipment: - Reignmac RMM520 (5-head) - Infeed and outfeed buffer magazines - Safety guards with inspection windows - Control panel - Extraction system connections Important information: - Machine is sold without cutters / cutting tools Applications: - Drawer sides and furniture components Iodpfx Aoywkk Uehnjig - Mouldings, rails, blanks - Wooden elements for further processing On-site inspection at the company is possible. Forklift loading available. Please contact us for more information.

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, Iiodpfx Asqvml Rshneg spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives Iodpfx Ahozwnmqonjig • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm including: Tersa knife shaft Auxiliary fence Planer safety guard Iedpfxjz Aukas Ahnoig Electric thickness table adjustment

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Iiodpfsyyqnlex Ahnog Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), actuation type: electric, Thickness planer SCM, 51cm width, electric height adjustment, 4 cutterhead. Ijdozxbb Rjpfx Ahneig

Condition: good (used), functionality: fully functional, Robust Hombak surface planer in a heavy-duty, solid cast iron construction. The machine features a planing width of 510 mm, an approximately 2,500 mm long planing table, and a 2-knife cutterhead. The fence is adjustable. The electrical system has been overhauled – the machine has a new switch and new wiring. A spare cutterhead including knives is also included and is part of the scope of delivery. Technical data / Features Manufacturer: Hombak Machine type: Surface planer Year of manufacture: 1980s Planing width: 510 mm Table length: approx. 2,500 mm Cutterhead: 2-knife cutterhead Dust extraction port: Ø 140 mm Construction: heavy-duty cast iron Fence: present, adjustable Connection: 400 V / CEE New switch New wiring Spare cutterhead incl. knives: present The machine is in used condition with signs of wear corresponding to its age. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Iodpfxszz Hd As Ahnoig Technical data and features may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: excellent (used), functionality: fully functional, planing width: 500 mm, number of blades: 4, total width: 1,700 mm, total height: 1,800 mm, overall weight: 2,000 kg, total length: 2,200 mm, chip removal: 160 mm, extraction connection diameter: 160 mm, height adjustment type: electric, number of feed rollers: 3, number of planer blades: 3, pass-through height: 200 mm, planing height: 200 mm, table width: 500 mm, working height: 200 mm, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl Iodpfxswfihue Ahneig I invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Iedpfxozt Hf Dj Ahnjig Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,200 rpm, total width: 1,200 mm, total height: 1,300 mm, overall weight: 950 kg, Equipment: documentation/manual, – Year of manufacture: 2016 – Manufactured in Belgium – Declaration of Technical Requirements (DTR), CE marking TECHNICAL SPECIFICATIONS: – Planing width: 630 mm – Planing height: 300 mm – Motor power: 7.5 kW – Number of knives: 4 pcs – Shaft diameter: 120 mm – Rotational speed: 5200 rpm – 2 rollers in the table – Electric height adjustment – Feed motor power: 0.75 kW – Table height adjustment motor power: 0.55 kW – Anti-kickback pawl row – Toothed feed shaft – Two smooth steel feed shafts Ijdpfx Ajzq Dndohneig – Stepless feed speed adjustment: 5 - 22 m/min – Maximum chip thickness: 8 mm – Dust extraction nozzle diameter: 160 mm – Thickness planer table dimensions (length/width): 1160 x 630 mm – Machine dimensions (length/width/height): 125 / 120 / 130 cm – Weight: 950 kg

Condition: not inspected (used), Year of construction: 2001, SCM SUPERSET XL Moulder 5 spindles (Comp.5) Description Number of spindles 5 Spindle sequence bottom-right-left-top-bottom Infeed table length 2500mm Working width 25-260mm Working height 6-180mm Feed speed 6-36 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) Iiedszqc Snjpfx Ahneg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table Isdpfx Ahezxx Dijnoig spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min

Condition: used, Year of construction: 1985, Dimensions of the thicknessing table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Maximum chip removal: 8 mm Working height min./max.: 3 / 235 mm Feed speeds: 7.5 / 15 m/min Iedpfx Ahoz Agd Soneig Cutterhead diameter: 120 / 4 mm/knife + 2 folding knives Speed: 5,000 min-1 Motor power: 5.5 kW Electric thicknessing table lift Setting gauge

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Iiedpfx Aoz Agu Dehneg Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: ready for operation (used), KUPFERMÜHLE – DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: conversion to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling spindles x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a swivel base Wood widths up to 820 mm can be planed with energy efficiency Iiedpfezlbz Rjx Ahnog with 1 motor below + 1 motor above good technical condition of the machine with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, SCM SUPERSET XL Four-Sided Planer Year of manufacture: 2007 The machine has only operated for 50 hours, it is practically like new. Technical specifications: • Working width up to 240 mm • Working height up to 120 mm • Spindle speed: 6000 rpm • Stepless feed adjustment: 5–25 m/min • Spindle configuration (5 spindles): - bottom 7.5 kW Iiedpfeyhhx Nex Ahneg - right 7.5 kW - left 7.5 kW - top 7.5 kW - bottom 7.5 kW • All tool spindles have independent motors The machine is equipped with 2 vertical spindles (2 and 3) with HSK85S quick couplings.

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm Iedpfxszh H N Eo Ahnoig - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)