Condition: excellent (used), Weinig Unimat 500 four-sided planer max. planing width: 230 mm max. planing height: 120 mm 6 heads Bjdjzxyvaopfx Aiaelp Spindle 1 - 7.5 kW Spindle 2-3 - 11 kW Spindle 4 - 11 kW Spindle 5 - 11 kW Spindle 6 - 7.5 kW Memory system control 40 mm spindles Feed controlled by an inverter Robust planer from WEINIG, machine inspected, well-maintained, in very good condition Machine dimensions: length 450 cm, width 200 cm

Condition: new, Thickness planer HOFMANN, model D 636 - new TERSA cutterhead with 4 knives 5.5 kW motor, 400 V, 50 Hz, Bljdpfxezylvuj Aiasp electronic start and brake unit Modern control panel ergonomically positioned. Electric adjustment of the thickness table with push buttons for adjustment in rapid or slow mode, as well as adjustment to within 1/10 mm, integrated operating hour counter. Thickness table on four support spindles and with 4-point guidance. Rubber infeed roller and 2 rubber outfeed rollers. Segmented pressure bar, rotary knob for pre-tensioning the outfeed pressure bar Dust extraction port Ø 160 mm, to the left. Integrated tool storage compartment including options: - Motor power 7.5 kW instead of 5.5 kW - Stepless feed rate 4-22 m/min, instead of the 2 feed speeds - Positioning control for D 636 with 250 memory slots

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg Bedpfxozyx E As Aiaslp

Year of construction: 1995, condition: excellent (used), Max szerokosc obróbki 500 mm Bjdpfjf S T Ddjx Aiaolp Przykładnica ustawiana pod kątem Wał 3 nożowy Solidna maszyna - żeliwny odlew

Year of construction: 1980, condition: good (used), Gubisch Planer and Rebate Machine 172/7 Serial No. 3425 80 Year of Manufacture 1980 Length of the infeed table: 1950 mm Maximum planing width: 170 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 7 Planing shafts: 1. Bottom surfacing shaft, 7.5 kW 2. Right jointing shaft, 3.0 kW 3. Left shaft, 4.0 kW 4. Right shaft, 4.0 kW 5. Top thicknessing shaft, 4.0 kW 6. Top thicknessing shaft, 5.5 kW 7. Universal shaft, top/bottom, 3.0 kW Voltage: 380 V, 50 Hz Power consumption: 33.6 kW Feed motor: 1.5 kW Feed speed, continuously variable: 5 – 30 m/min. Weight: 3300 kg Bodpfxjgrmymo Aiaslp Dimensions (L x W x H): 4800 mm x 1400 mm x 1850 mm Technical specifications subject to change.

Year of construction: 1950, condition: good (used), 4 wedge-mounted knives 400mm wide Blodeimd Hwjpfx Aiajp length of the tops about 2250mm Adjustable culaga at an angle table adjustable up and down manually machine ready to work, technically in good condition,

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides Blodpfx Ajltla Sjiaep length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right 3. left 4th top 5. universal Bodjlx Em Uepfx Aiaolp feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner! Bodpfxeizxf Hj Aiajlp

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm Blodpfx Aioibq Nijajp electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Bljdpjt Rp Hxsfx Aiajp Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: good (used), Year of construction: 2002, Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication Bodpfx Aohhyr Asiaelp - length of the top 1980 mm Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: excellent (used), Guilliet KXR four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 5.5kw Bottom 5.5kw Universal 5.5kw Feed rate adjustable on variator 6-27m/min Blodpfsn Tph Eex Aiajp Feed motor 2.2kw Feed on cardan shafts Pneumatic stops Worktop lubrication

Year of construction: 1950, condition: good (used), Max working width 400mm 3 knife shaft Table top length 2500mm 3kW motor 400V power supply Bodsm Tz Tbjpfx Aiaelp Cast iron

Condition: excellent (used), Year of construction: 2010, Hypermac 723+ – Year of manufacture 2010 7-spindle planing machine For sale is a Hypermac 723+ planing and profiling machine with 7 spindles, manufactured in 2010. Still in operation! Technical data: Working width: 230 mm, height: 150 mm. Max. feed rate: 36 m/min Bjdpfxsnk Ux So Aiaslp * Manufacturer: Hypermac * Model: 723+ * Year of manufacture: 2010 * Number of spindles: 7 * Spindle arrangement: bottom – right – left – top – bottom – top – bottom * Spindle motors: Siemens * Motor power: 11 / 12 / 12 / 15 / 15 / 11 / 11 kW * Total spindle power: 87 kW * Feed motor: 7.5 kW * Spindle diameter: 50 mm (horizontal and vertical) * Frequency converter: Schneider Electric Further information and on-site viewing available upon request.

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions Bljdpfxen Dw N Do Aiaep CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg Bledjicbhvopfx Aiaep technical specification under subject of correction

Year of construction: 2001, condition: excellent (used), planing width 220 mm planing height 120 mm 1 lower head 5.5 kW 2 right head 4 kW 3 left head 4 kW 4 upper head 7.5 kW two feed speeds power of the feed motor 1.1 kW Bjdpsiduh Njfx Aiaelp electrically regulated machine by means of an operator panel pneumatic material pressure

Condition: like new (used), Year of construction: 1991, functionality: fully functional, Weinig PROFIMAT 22N four-sided planer – after technical inspection – very good condition – technical documentation TECHNICAL SPECIFICATIONS: planing width 220 mm planing height 120 mm spindle diameter 40 mm bottom head 4 kW right head left head 11 kW top head 5.5 kW bottom head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four upper steel feed rollers one upper rubber feed roller feed via cardan shafts pneumatic pressure electric height adjustment length of the infeed table 2485 mm Bjdpfjthfh Eex Aiaolp machine dimensions (L/W/H) 400 / 180 / 170 cm weight ~ 1800 kg

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg SCM Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) Blsdpjwzmu Djfx Aiaep All prices quoted are net and subject to VAT.

Condition: used, AD planer Rojek 410, good condition, year 1997, standard equipment, 3.4 kW S1, 400 kg Bedpfx Aiowzzg Uoaolp Price changes reserved, errors, printing and typesetting mistakes excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input current: 123 A, input frequency: 50 Hz, planing width: 630 mm, total length of planing tables: 2,900 mm, overall weight: 2,890 kg, workpiece width (max.): 630 mm, workpiece height (max.): 75 mm, number of planer blades: 15, operating speed: 333 mm/s, planer shaft diameter: 122 mm, table length: 2,900 mm, table width: 630 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, MADORA Sp. z o.o. is a Polish manufacturer of industrial machinery, specializing in woodworking and metal processing equipment. Since 2013, we have been delivering reliable, high-quality machines designed for both small workshops and large-scale production facilities. All our machines are designed and built in Poland, ensuring European quality, durability, and performance. Whether you're looking to expand your woodworking capabilities or modernize your workshop, our solutions are built to meet professional expectations while remaining user-friendly and cost-effective. The DYRA 630 is a multifunctional combination machine capable of performing three machining operations in a single pass. Its versatility and multi-functionality result from its three machining zones: Blsdswz D Stjpfx Aiaep - Planing machine zone - Thicknesser machine zone - Multi-rip saw zone

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication Bedpfjw E I Rujx Aiaelp - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Bodpfexyu Itox Aiajlp

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Bedsxy Hy Ujpfx Aiajlp Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes