Used tilting spindle moulders for sale (48)

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Iaedpfjvwf Ucex Abcjp

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 ht-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Iedpfx Abjvwf Icocoap

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Iajdpfxevxr Rte Abcsp

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Ijdpfx Abjr Hr D Necoap Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, used, in good condition, low running hours Iajdpfsycxg Hox Abcop Manufacturer: Bäuerle Model: SFM 2 Machine No.: B1533 Tiltable from -5° to +45° Mechanical brake 6 speed levels: 2800/4500/5600/9000/6000/12000 rpm Reversible (right/left hand rotation) Table size: 1100 mm x 900 mm Spindle diameter: 30 mm Cast iron fence jaws Cutter fence with fine adjustment Extraction port D 120 mm Required space approx. 1100 x 1100 x 1200 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without any warranty or guarantee

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm Iajdpfjh Nvyzsx Abcep -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: good (used), Year of construction: 2005, - 5 spindles - Min. working width 10 mm - Maximum working thickness 120 mm - Variable speed drive 5-29 m/min - Rotation of the machining spindle 6,000 rpm - Diameter of the machining spindle 40 mm - Tool diameter max 180 mm Iaedoiu E Rtopfx Abcop - Pneumatic clamp - tilting the heads at an angle heads order: 1. Rights 2. Rights 3. Left 4. Left 5. Left Installed power 18 kW 39A

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Electronic fence adjustment Iasdpfx Aexg Iz Hsbcep Electronic angle adjustment SCM 4-roller power feed

Condition: new, Table dimensions 1.200 x 780 mm Motor output 7,5 kW Spindle diameter 30 mm Iasdpfx Aboxyafqjcjp

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 Iedpsw Hfd Isfx Abceap The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), height adjustment type: electric, Tiltable spindle moulder HOFMANN TFS 107 Iasdpfsu Nz Ndjx Abcop Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: used, Table dimensions 2500x 780 mm Iedpfxjxpi D Is Abcoap Motor output 7,5 kW Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Isdpfx Ajx Dmnaebcjap Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: as good as new (ex-display), functionality: fully functional, 7.5 kW Motor, 400 V, 50 Hz Iedjx Ey S Ropfx Abcoap Heavily ribbed cast iron table with table rings Electronic soft start and braking device Electric height and tilt adjustment with rapid and slow-motion modes, precise to 1/10, height adjustment approx. 145 mm, tilt adjustment +/- 45.5° 4 spindle speeds: 3,000/4,500/6,000/9,000 rpm Spindle fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut Left-/right rotation, machine socket outlet, arc milling guard type TAPOA, Hofmann "Centrex" Paintwork: grey white/signal blue Table size 2000 x 815 mm Extendable support Heavy-duty milling fence type 2620 Total adjustment via handwheel with indicator included Switchable to tool zero position. Digital display for individual jaw adjustment. Includes quick clamping system for the fence jaws Cast iron fence jaws Safety rulers and moulding board Interchangeable spindle MK5 Power feed unit, 4 rollers, 8 speeds with stand Control panel on top Tool compartment

Condition: good (used), Year of construction: 1988, functionality: fully functional, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Year of manufacture: 1988 S/N: 8831 Robust spindle moulder with electrically adjustable height and tilt, powerful motor (7.5 kW), multiple speeds, and extensive equipment. Iaedpfxjwt A Dxo Abcep Technical specifications: Spindle diameter: 30 mm Spindle stroke (height): approx. 150 mm Tilting range: −5° to +45° Height adjustment: electric, with digital display Tilting adjustment: electric, with digital display Fence adjustment: manual, with scale indicator Spindle speeds: multi-stage – 3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also 100–110 mm) Single-sided table extensions right side: roller/tenoning table/extra accessories with workpiece clamp and end stop ruler, angle adjustable Dimensions & weight Table size: approx. 1,200 × 820 mm Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Weight: approx. 1,100 kg

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Ijdpfx Abjm Tg Ecjcjap Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: used, Year of construction: 1998, machine/vehicle number: AB/118120, SECOND-HAND TILTING SPINDLE MOULDER SCM MOD. T110 I - CE RULES - Volt. 400/50 Iaedpfxewrfhkj Abcsp - S/N AB/118120 - Year 1998

Condition: good (used), Year of construction: 2005, functionality: fully functional, MACHINE ASSEMBLED AND WORKING Iasdpfx Aju Tq Syjbcsp

Condition: good (used), sander consisting of: first group - electronic cross belt second group - electronic pad belt third group - electronic pad belt superfinisher machine with inverter on belt and vacuum for small parts line machine Iasdpfxst N Tfcj Abcjp

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Iajdpfoxbq Ulox Abcjp Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 electric height adjustment digital display clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Milling fence with siko counter Iasdpjub S U Sefx Abcjp Spindle diameter 30 mm Table size 1350 x 800 mm Control panel on top Extraction connection 2x120 mm

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, milling spindle length: 150 mm, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length Iajdpjwcpqqsfx Abcsp

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, type of input current: AC, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, table width: 800 mm, table length: 2,000 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 860 mm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, clamping height: 125 mm, height adjustment type: electric, opening width: 370 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, table height: 860 mm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Iajdpfx Abjvn Rb Aocop Suva matic