Used Turning automatic lathes for sale (257)

Condition: good (used), Tornos ENC 74 T CNC automatic lathe TECHNICAL DATA Movable headstock Maximum round bar passage: 7 mm Minimum round bar passage: 1 mm Square bar capacity: 5 mm Hexagonal bar capacity: 6 mm Maximum turning length of fixed guide bush (7 mm): 113 mm Maximum turning length of fixed guide bush (10 mm): 109 mm Turning length of synchronously rotating guide bush (10 mm): 81 mm Turning length of synchronously rotating guide bush with 3 positions: 72 mm Maximum turning length of MAGIC guide bush (7 mm): 104 mm Maximum turning length of Habegger guide bush (10 mm): 103 / 94 mm Collet chuck Schaublin type F13: 76-357 Minimum and maximum clamping force: 270 and 590 daN Main spindle speed: 15`000 rpm Fast feed (headstock): 15 m/min Resolution of the measurement (Z1): 0.00025 mm Guide bush holder Number of tools: 7 Maximum number of cross drilling attachments and cross milling cutters: 3 Maximum speed: 6000 rpm Square layout of the tools: 8 x 8 mm Rapid feed of the tools (X1/Y): 7.5 / 10 m/min End attachment Movement speed X2: 15 m/min Movement speed Z2: 15 m/min Number of positions for end units: 3 Center distance between units: 50 mm Counter headstock maximum clamping diameter: 7 mm Ndedovdwcfepfx Aa Isc Collet chuck Schaublin type F13: 76-357 Maximum counter-spindle headstock speed: 12`000 rpm Speed of the rotating units: 12`000 rpm Counter operations Number of positions: 3 Diameter of bores for tool carriers: 35 mm Center distance between positions: 50 mm SCOPE OF OFFER Including: (list not exhaustive) Tornos ENC 74 T CNC automatic lathe Control: GE Fanuc Series O-TT Fire extinguishing system: Siemens Chip conveyor Coolant tank / pump High pressure pump Bar feeder: LNS Exact scope of supply according to photo gallery No liability is assumed for the correctness, completeness and up-to-dateness of the information

Condition: excellent (used), Year of construction: 2018, operating hours: 2,651 h, functionality: fully functional, Rotatable diameter as Swiss-type lathe: 38 mm Rotatable diameter as conventional lathe: 42 mm Guide system: JBS double cone Parts catcher included: for both short and long parts Ndsdpfexnbc Hsx Aa Iec Turning length in a single pass: approx. 320 mm (simultaneous finish and roughing) Simultaneous machining: front and rear sides Control: Fanuc Series 31i-Model B In-process measurement: Blum probe Bar feeder: FMB LSK38, max. bar length extended to 3300 mm Oil mist extractor: UC1SD High-pressure system: available, 100 bar Lubricant: coolant Various accessories: guide channels, guide tubes, various tools, various double cone bushings

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of spindles 2 Spindle speed range 6500 Spindle bore 34 mm Nedjxlllmjpfx Aa Iedc Number of axis 9 This 9-axis Hanwha XDI32-N was manufactured in 2021, featuring a dual spindle system with a maximum speed of 6,500 rpm and power of 2.2/5.5 kW each. It supports a maximum work diameter of 32 mm and includes a 315-liter cooling tank. Ideal for precision Swiss-type turning, this machine ensures efficient and reliable performance. If you are looking to get high-quality turning capabilities, consider the Hanwha XDI32-N machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Ndodpfexl U Epex Aa Isc Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: used, functionality: fully functional, Manufacturer: TORNOS Type: DECO 2000/07 Year: 1996 Machine no.: T 62136 Country: Switzerland Specifications: Max. capacity in collet: 7 mm Control: FANUC 16 T-B Hour counter, machine powered on: 24,095 hours Equipped with: Collet clamping device Bar feeder magazine Ndjdpjxq D Svefx Aa Ioc Full C axis Workpiece gripper Tool holders Coolant system Operator keys, etc.

Condition: used, Year of construction: 2000, functionality: limited functionality, Manufacturer: STAR Nodpsxl Ridsfx Aa Isdc Type: SR-20 Year of manufacture: 2000 with: FANUC 18i-TB control, powered tools (main side), synchron spindle, back side machining (motor defective), C-axis, chip conveyor, oil mist extractor, fire extinguishing system, bar loader magazine FMB

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Ndsdewg Takopfx Aa Iec Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fanuc control, turret with Y-axis and AGW, FMB bar feeder, chip conveyor, tool holders, including driven ones. Ndsdjxl Tkkspfx Aa Iec

Condition: ready for operation (used), Year of construction: 2012, General Data Ndsdpoxgv U Isfx Aa Isc Measurements width 1270 mm Measurements depth 2630 mm Measurements height 1580 mm Machine weight 2500 kg Control Unit Brand FANUC Model na Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5 kW Number of axis 6 This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for tact us for more information. Application Types Turning

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Nedpfx Ajvnwf Ija Isdc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: like new (used), Year of construction: 2015, Hanwha CNC Swiss-type Lathe XD20V with Siemens Control, machine is in as-new condition, training machine with approximately 800 hours 840 D SL Year of manufacture: 2015 MAIN SPINDLE Maximum turning diameter: 20 mm Maximum spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 4.3 C-axis with 0.001° resolution Z1 stroke [mm]: 210 Synchronous running guide bush unit Guide bush type: 22.001 / T223 Collet type: 145E / F25 SUB SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 3.7 Maximum pick-off diameter [mm]: 20 Max. part length ejecting forward [mm]: 80 C-axis with 0.001° resolution Z2 stroke [mm]: 210 Collet type: 145E / F25 TOOLING OPTIONS Tool slide X1, Y1: Nedpfx Aaowzzabe Iodc - Toolholder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Number: 5 driven drilling/milling spindles, modular - (Tools 2 x ER16 – 3 x ER11) - Power [kW]: 1.6 (S6000) - Front drilling unit for 4 drilling spindles, diameter 25 mm (omitted if B-axis is opted) Sub spindle cross slide - Number: 2 drill holder mounts, diameter 22 mm - Max. drilling depth 100 mm Backworking with Y2 axis - Tool carrier for 8 tools - 4 driven drilling/milling spindles ER16, modular - 4 stationary drilling/milling spindles ER16, modular WORKING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 (3 with B-axis option) Rapid traverses m/min: 40 m/min (X1, Z1, Z2, Y1, X2, Y2) Connected load [KVA]: 15 ACCESSORIES Leveling pads with leveling elements Toolbox and service tool set Work area light Signal tower (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8-liter lubrication oil capacity) Coolant flow monitoring Pneumatic blow-off unit for the pick-off collet chuck Manual and documentation in German and English (Including maintenance and operation manual, parameter list, and inspection protocol) CONTROL Control type: Siemens 840 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color LCD/MDI monitor Automatic PowerOff shutdown function Program check function (test run possible via handwheel) Continuous thread cutting cycle Run time display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder JBS interface Bar loader magazine: FMB Turbo

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Ndedpfx Aswi Ty Aea Ioc Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20 Nodpevnwfzefx Aa Ijdc

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Nsdpfst E Dbyex Aa Iodc Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1999, condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Ndsdpfxsktfiaj Aa Isc Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg Njdpfx Ajvllmhoa Iedc SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe Ndedpfevrz H Rex Aa Ioc TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Ndsdpfxeu Uicyj Aa Isc Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Nsdpfx Aaou Uic Tj Isdc Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Ndodpfxjwf Aclo Aa Isc Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Year of construction: 2006, TECHNICAL DATA Axis data Rapid traverse rates: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 min⁻¹) Maximum feed rates: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 min⁻¹) Minimum input increment: X, Y, XB: 0.001 mm / 0.0001 inch (diameter) Z, ZB: 0.001 mm / 0.0001 inch Nedpfx Ajwvap Rja Iodc C: 0.001° Machining capacities Maximum machining diameter: Ø16 mm (5/8 in) Maximum headstock stroke: fixed guide bushing: 205 mm (8 in) rotating guide bushing: 155 mm (6–3/32 in) rotating magic guide bushing: 155 mm (6–3/32 in) Maximum drilling capacity with driven tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum tapping capacity with driven tool: M5×P0.8, M3×P0.5 Maximum milling capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum thread cutting capacity: M8×P1.25 Machine configuration Operating mode: right-hand machining station Design: integrated mechanical/electrical setup Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle height: 1060 mm Weight: approx. 1700 kg Main spindle Spindle speed: max. 10,000 min⁻¹ Speed control: S-command + direct 5-digit command Main spindle drive: 2.2 kW (continuous), 3.7 kW (15 min/60% duty cycle) Indexing: 15°, 1° Tool combinations Various combinations with 1–3 spindles for tool diameters Ø12 mm, Ø10 mm, or Ø6 mm Tool holders for ER11 or ER16 Drill mounting Number of tools: 4 Max. speed: 5000 min⁻¹ (ER16), 7500 min⁻¹ (ER11) Drive motor: 0.4 kW Tool selection: servo motor Backworking unit Max. chuck diameter: Ø16 mm (5/8 in) Max. part length: 80 mm Max. outer spindle travel: 30 mm Max. part ejection length: 50 mm Spindle speed: max. 8000 min⁻¹ Spindle drive: 100 W, AC servomotor Tools: 4-spindle unit Max. drilling capacity: Ø8 mm (5/16 in) Max. tapping capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (non-exhaustive list): STAR SB-16D CNC Swiss-type lathe Fire extinguishing system Coolant tank LNS Tryton-112 bar feeder High-pressure pump Machine accessories Bar feeder accessories Complete operating documentation Exact scope of supply as per photo documentation.

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW Nedpfjiq Dp Nex Aa Iedc main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2006, STAR ECAS-32T CNC lathe TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA OFFER SCOPE U.A: (list not exhaustive): STAR ECAS 32 CNC automatic lathe Barload bar loader Siemens fire extinguishing system Tool holder set Chip tray and coolant pump High pressure pump transformer Exact scope of supply according to photo gallery Njdpfeu Hkg Tsx Aa Ijdc We assume no liability for the accuracy, completeness and timeliness of the information

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information Nsdpfx Aaju Hkh Rj Iodc

Year of construction: 2000, condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Ndodpfx Aasmdn Imj Iec Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.