Used Vertical turning lathes for sale (194)

Condition: used, Year of construction: 2009, turning diameter 320 mm turning height 180 mm Control SIEMENS 840 D chucking diameter 315 mm 0 4 U/min 1 mm rapid power traverse in X-and Z direction 60/30 m/min tool turret with 12 work positions VDI 50 total power requirement 65 kW weight of the machine ca. 13,5 t Cslq I Devxwk Sj Hzogt dimensions of the machine ca. 5,5 x 3,2 x 3,3 m

Condition: used, Year of construction: 2006, A VL 5 oLT, built in 2006, is for sale ex-works. The machine can be inspected under power. Cgslq Ijup Tizo D Hzjt

Condition: good (used), Year of construction: 2010, Functionality: fully functional, GENERAL Project No: 905696 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2010 Condition: Used Machine Programme run approx. [h]: 49.479 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Cslq I D Hevfmduszsgt Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Colq I D Howcdytezjgt Two machines are available

Condition: used, Functionality: fully functional, Press brake with complete accessories. Colq Iswgl I Te D Hzsgt

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Cjlq I Dswbk U Ie Hzogt Media Main electronic connection 40 kVA This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), chuck outer diameter: 2,000 mm, net weight: 30,000 kg, Verticale open zijboor- en draaibank Beweegbare hoofdkolom: 1000 mm Max. dia (voor het draaien van de flens) vanaf het midden: 2700 mm Cgslqewda Sno I D Hzjt Max turningdia -- passage: 4000 mm Power on the spindle: 30 kW Max longitudinal travel X-axis: 1350 mm Max hight of workpiece Z-axis: 1800 mm Number of speeds: 1,4 > 120 rpm Long: 5350 mm Wide: 6200 mm

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 3141 & 3151, Used CTV250s for sale, built in 2007. ---- Please state your offer price for 1 or 2 used CTV250s, built in 2007. Serial No. ... 3141 & 3151 Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Our line, consisting of four identical CTV250s from 2004 and 2007, is for sale. The machines can operate individually. Bids can be placed for 1-2 units of this model year. Cgelq I D Hsvft I Tszet The machines are connected to a central lubricating oil supply. The machines are delivered without the robot. The machines are currently in series production and will be shut down approximately in the third quarter of 2025. A visit is possible at any time by appointment. Scope of delivery: Machine, clamping tools, chip conveyor. Not included in delivery: Kuka robot ----- Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 2018, operating hours: 28,500 h, Functionality: fully functional, GENERAL Project No: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of Manufacture: 2018 Condition: Used Machine Programme run approx. [h]: 28.500 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Cgeljry Uhwsq I D Hzst Discharge hight chip conveyor 1250 mm Coolant unit with paperband filter Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: excellent (used), Year of construction: 2005, turning diameter 140 mm swing diameter 200 mm turning height 630 mm Control Siemens 840 S Cgolqevvcibs I D Hzot centre distance 832,5 mm turning length 380 mm spindle head Grösse 6 spindle diameter in front bearing 110 mm bed slide 2 number of cross-slides 2 turret head VDI 40 number of tools 11 total power requirement 70 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,8 x 8,6 x 3,8 m

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Cslq I D Hswbqnuezegt Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced Cgoletpu Szsq I D Hzet -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Cgelq I D Hjwfdddozjt Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: good (used), Year of construction: 2010, spindle speed (max.): 2,000 rpm, turning diameter: 730 mm, Control: Fanuc 0i-TD Colq Iovz T D He D Hzjgt Table Diameter 610mm Swing 800mm Turning Diameter 730mm Max Turning Length 749mm Chuck Size 610mm X-Axis Travel 389mm Z-Axis Travel 780mm Rapid Traverse (X/Z) 472/630 ipm Spindle Speed (RPM)2,000 rpm Spindle Nose A2-11 Spindle Motor (HP)37 kilowatts Turret Capacity 12 Machine Dimensions 1,905mm x 2,718mm x 129 Weight9,070 kg

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Manufacturer: EMAG Type: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: Approx. 1,848 Turret Base Unit and Y-Axis Slide Unit HP Turret Drive Unit for Driven Tools (C442) with Internal Coolant Supply Max. Speed: 6,000 rpm Crosscut Speed: 3,200 rpm Tool Carrier Unit for Driven Tools: 12 x BMT75 Circular Workpiece Transport System, O-Design Drag Frame System for 10 Workpieces Workpiece Height (including workpiece pallet): Max. 300 mm Workpiece Weight: Max. 60 kg Set (10 pcs.) Drag Frames for O-Band For Workpiece Diameters: 150 - 400 mm Blow-Off of the Workpiece and Clamping Device (Pick-up) Coolant supply: 15 bar Coolant pump, flow rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Cslqjvq Iwyo I D Hzsgt Coolant double filter, manually switchable Filter mesh 100 μm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color indicator light Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable Clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 external finishing tool 1x 8.BMT25VL8IKX50 external roughing tool 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 Drill Bit, 20 mm Diameter 1 x 42.V522L08Ik Drill Bit, 22 mm Diameter 1 x 27.V514WNL31 Drill Bit, 14 mm Diameter Software Package Operating Instructions / Maintenance Manual 170425

Condition: used, Twin Spindle type Two tables, two 12 positions tool changers. New in 1983 but mechanically in very good condition. SINUMERIK 840D PCU 50 (upgrade in 2010) - PLC Simatic S7 spindle diameter 910 mm, max. working height 520 mm Cjlq Ijv Sp Ipe D Hzjgt cooling threw spindle Tools VDI 60 s BTS, Capto Machine weight 16.000 kg A lot of tools, tool holders, incl. probes

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: V4AY3601, feed length X-axis: 200 mm, feed length Z-axis: 400 mm, controller model: Sinumerik 828 D, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! Cgjlqjwd R R Ie I D Hzjt TECHNICAL DETAILS Control: Siemens Sinumerik 828 D Z-axis travel: approx. 400 mm X-axis travel: approx. 200 mm MACHINE DETAILS Dimensions: 4,000 x 2,400 x 2,300 mm Weight: 5 t Operating voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 46 A EQUIPMENT - C-axis included - Chip conveyor included - Conveyor and loading system from EWAB

Year of construction: 2007, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Cgolq I D Heh Nhlwszst Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Condition: good (used), Good condition Electronic unit Ready for delivery 4000 MM Cgolq Iovnmmuj D Hzet Steady rest

Condition: used, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. Cgelq I Dsuyh Tds Hzst More information on request.

Year of construction: 2005, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: Cgelqsh Nhlto I D Hzjt - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. Colq I Djvzcnzj Hzjgt The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Cjljvzcnbjq I D Hzsgt Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm Cjlsqvd Iqjq I D Hzsgt max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm Cgolq I D Hsqvd Iuezjt max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2