Used Vertical turning lathes for sale (209)

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Njdsw R S Ugopfx Aa Ijdc Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Ndjdpfxjkyth Is Aa Isc Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. Ndedpfxjtrwdte Aa Iec COTROL Siemens Powerline TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE power: 28 kW speed: max. 6000 rpm TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 105958, travel distance X-axis: 700 mm, travel distance Y-axis: 375 mm, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 100 mm, workpiece length (max.): 150 mm, The automation is included in the scope of delivery! TECHNICAL DETAILS Travels X-axis: 700 mm Z-axis: 375 mm Workpiece Chuck diameter: 160 mm Max. workpiece diameter: 100 mm Max. workpiece length: 150 mm Main spindle Power 40% / 100%: 19.5 / 12.5 kW Torque 40% / 100%: 75 / 48 Nm Max. speed: 6,000 rpm Turret Tool stations: 12 Rapid traverse speed X / Y / Z: 60 / 30 / 30 m/min Driven tools Speed: 6,000 rpm Torque 30% / 100%: 27 / 15 Nm MACHINE DETAILS Frequency: 50 Hz Operating voltage: 400 V Connected load: 30 kW Total weight: 6,000 kg Ndjdpfxoxb Tu Ij Aa Isc

Condition: used, Year of construction: 2012, Vertical CNC lathe with swivel axis, linear workpiece feed belt, and loading robot. Coolant system and chip conveyor. CNC control Siemens 840D Ergoline. Ndjdpfx Aew Smtaja Iec Pick-up spindle Max. spindle power 25/32 kW Max. spindle speed 5,000 rpm Max. torque 260/360 Nm Rapid traverse x/y/z 60/40/40 m/min Tool carrier with swivel axis, two driven tool holders HSK 63 for milling, and one tool holder C5 ADI-25 for turning operations.

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm Ndjdevdgbqopfx Aa Ioc The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Nedpfx Aew R S Uaea Isdc Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 470 mm, travel distance Z-axis: 876 mm, spindle motor power: 30,000 W, spindle speed (max.): 1,250 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, turning diameter: 1,000 mm, total length: 2,375 mm, total height: 3,659 mm, total width: 4,558 mm, type of input current: three-phase, torque: 3,655 Nm, input voltage: 400 V, overall weight: 14,000 kg, Equipment: cooling unit, CNC Vertical lathe MAZAK Mega Turn 900 TECHNICAL CHARACTERISTICS: CNC control: MAZATROL SmoothG Max. turning diameter: 920 [mm] Max. cutting diameter: 1000 [mm] Stroke X axis: 470 [mm] Stroke Z axis: 876 [mm] Rapid traverse rate X axis: 24000 [mm/min] Rapid traverse rate Y axis: 24000 [mm/min] Spindle nose: A2-15 Max. spindle speed: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Min. distance from spindle face to turret face: 154 [mm] Max. workpiece weight: 3000 [Kg] Max. distance from spindle face to turret face: 1030 [mm] Number of tool stations: 12 Turret indexing time: 0.4 [s/pos] Lubrication tank capacity: 516 [l] Total power required: 58.9 [kVA] Ndodpew T Tmpofx Aa Ioc Supply voltage: 400 [V] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 14000 [Kg] More information available upon request.

Condition: good (used), Year of construction: 2011, Control: FANUC max. workpiece diameter: 220 mm max. workpiece weight: 20 kg max. turning length: 175 mm max. speed: 4,500 rpm travel path: X 660, Z= 300 mm tool changer with 12 stations chip conveyor Nedpfx Aajvzrk So Iedc

Condition: ready for operation (used), Schiess 32 DZ Type: 32DZ 300/350-325/160 De Schiess DZ-tafeldraaibank met twee staanders is geschikt voor alle soorten draaiwerk. Tafeldiameter: 3000 mm Maximale belasting: 44 ton Snelheid: 1 100 tpm Maximaal overdraagbaar koppel op de tafel: 10.000 kpm Snijkracht op de wagen: 5000 kp Vermogen: 75 kW CNC-besturing: BOSCH (Kogelomloopspindel) Heidenhain lineaire schaal Horizontale verplaatsing van de gereedschapshouder vanaf het midden van de tafel: 2510 mm Verticale verplaatsing van de dwarsbalk: 1600 mm Nodpfov Sfnxox Aa Iodc Verticale slag van de gereedschapshouder: 1600 mm Gereedschapshouder kan 30° naar links en rechts kantelen Maximale hoogte van het werkstuk: 3420 mm Maximale diameter van het werkstuk: 4020 mm Gereedschapswisselaar met 12 gereedschapsposities

Condition: used, Morando Twin Head Vertical Turning Centre with Siemens 840D CNC Control, 1450 3 Jaw Chuck, (1) x Fixed Tool Head, (1) x 4 Position Tool Turret Head, Swarf Conveyor, Coolant Clarifier System - CE Mark Ndsdpfx Aaoxdbydo Iec Please Note: Dismantling and Loading will be carried out by our own supplier Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: Famar N 20 5, Can be inspected in Poland Ndedpexb Avbefx Aa Isc

Condition: excellent (used), Year of construction: 2005, Fanuc 18 iTB control Swing diameter 210 mm, Nsdpow Rdcpefx Aa Ijdc X/Z travel 400/200 mm, Spindle speed 7500 rpm, 12-station turret with driven tools. Chip conveyor belt, 3-jaw chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, operating hours: 50,457 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 200 mm, total length: 8,500 mm, total height: 3,800 mm, total width: 4,300 mm, type of input current: three-phase, workpiece diameter (max.): 250 mm, overall weight: 15,000 kg, controller model: Siemens 840 D sl, For sale is a MAG DVT250, year of manufacture 2011. Equipped with a Siemens 840 D sl control system. Equipment: - Infeed and outfeed conveyor - Chip conveyor (discharge to the right) - Coolant system - 2x tool turrets 12x VDI30 The machine is under power and can be inspected. *The marking unit (Richter [picture 1 right]) is defective and not part of the listing. Ndjdpfx Aajxc Enie Iec

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Ndodjwcdytopfx Aa Ioc Parts feeding via shuttle (included) Two machines are available

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7-41 5157 40, The Pittler PCC vertical lathe, serial number 7-41 5157 40, was built in 1999 and corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for the precise machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler Max. turning diameter: 300 mm Travel: X-axis 920 mm / Z-axis 250 mm C-axis: available Chuck diameter: 250 mm Spindle speed: 28–7000 rpm Spindle power: 23–29 kW Max. torque: 150–188 Nm Spindle bore: 60 mm Tool turret: 8 positions Control system: Siemens Sinumerik 840D Coolant and chip conveyor: integrated Machine weight: approx. 6.5 tons Nodpswlaqyefx Aa Iodc Connected load: 54 kVA at 400 V / 50 Hz This machine is designed for automated operation and is particularly suitable for machining small to medium-sized workpieces with high precision. Availability and further information: Several machines of this type, built in 1999, are currently available, including those with the machine numbers 7-41 5157 35 and 7-41 5157 36. These are located in Germany and are in good used condition.

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Ndjdpow Nb E Ssfx Aa Isc Additional Equipment Scope of delivery: Machine, clamping system, chip conveyor This 3-axis GORBREX TKV 525 CNC was manufactured in 2021, offering precise vertical turning capabilities. Ideal for detailed machining tasks, this machine maintains robust construction and modern design. Consider the opportunity to buy this GORBREX TKV 525 CNC vertical turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1990, machine/vehicle number: 06725, TECHNICAL SPECIFICATIONS 1AC 1 Adjustable tool travel from 0 to mm 200 2 Distance between column and tool holder mm 350 3 Distance between table and head mm 460 5 Ram vertical travel mm 370 6/7 Measurements table mm 280x500 8 Longitudinal travel ( NC controlled axis Y ) mm 230 9 Horizontal travel ( manual axis X ) mm 250 10 Through hole Ø mm 80 N. of variable stepless strokes N.stroke/min 30 to 120 Ram drive motor Kw 2,2 Overall machine dimensions mm L = 1220 Nsdpfx Aotyyt Aea Iodc P = 1200 H = 2300 Weight Kg 1150

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Tooling: Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Ndsdpfxovy Ti Hj Aa Ioc Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks.

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 2,20,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton Ndjdpjwaiuqjfx Aa Iec koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: used, Year of construction: 2014, functionality: fully functional, Travel path - X axis: 740 mm Travel path - Z axis: 400 mm Travel path - Y axis: 30 mm (optional) Chuck diameter: 260 mm Max. turning diameter: 200 mm Spindle speed: 4,500 rpm Tool speed: 6,000 rpm Rapid traverse Z-axis: 15 m/min Nodpfow Imtfox Aa Ijdc Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 30 mm Machine weight approx.: 9,000 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,000 h, functionality: fully functional, machine/vehicle number: 1580196, travel distance X-axis: 320 mm, travel distance Z-axis: 844 mm, spindle bore: 50 mm, controller model: SINUMERIK 840 DE, tailstock quill stroke: 330 mm, TECHNICAL DETAILS Table Data Table diameter: 420 mm Swing diameter: 620 mm Center height: 420 mm Turret stroke: 280 mm Tailstock stroke: 330 mm Spindle bore: 50 mm Axes Programmable Travel +/- X1: 320 mm Z1: 844 mm C1 (spindle): max. 6,000 rpm W1: 1,400 mm (tailstock) X3: 1,500 mm Z3: 509 mm Axis Speeds Nsdpfx Asw H Nklea Iodc Max. axis speed: 24,000 mm/min X3 speed: 60,000 mm/min Z3 speed: 30,000 mm/min Tool Interface: CAPTO C 5 Control: SINUMERIK 840 DE MACHINE DETAILS Electrical Data Three-phase operating voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Machine rated current: 53 A Main connection fuse: 100 A slow-blow Dimensions & Weight: Machine dimensions (L x W x H): 2,800 x 2,450 x 2,800 mm Machine weight: 7,500 kg Conveyor dimensions (L x W x H): 2,150 x 3,200 x 1,900 mm Conveyor weight: 2,500 kg Chip conveyor dimensions (L x W x H): 3,500 x 800 x 1,600 mm Chip conveyor weight: 500 kg Guard dimensions (L x W x H): 2,200 x 1,400 x 800 mm (stacked horizontally) Guard weight: 250 kg Loader dimensions (L x W x H): 2,000 x 1,200 x 3,000 mm Loader weight: 250 kg Measuring machine dimensions (L x W x H): 700 x 900 x 1,700 mm Measuring machine weight: 500 kg Operating Hours Spindle hours: 13,000 h Operating hours: 20,000 h Power-on hours: 34,900 h EQUIPMENT Programmable tailstock Driven tools Loading device Tool measuring station

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 12500 kg Nsdew H Twhepfx Aa Iedc Media Chip conveyor Yes This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1999, Control: Siemens Sinumerik 840D Working range: max swing diameter: 300 mm Ndjdpfx Aovvmkioa Ijc Main spindle: minimum spindle speed: 28 rpm maximum spindle speed: 7000 rpm maximum torque: 188 Nm turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 810 D Main Drive Spindle speed range 4000 Spindle motor power 1.2-12 kW Number of axis 2 Movement X-Axis Movement 850 mm X-Axis Feed Force 2500 N X-Axis Rapid Traverse 3000 mm/min Z-Axis Movement 550 mm Njdpfxow H D Uro Aa Ijdc Z-Axis Feed Force 2500 N Z-Axis Rapid Traverse 3000 mm/min This IRLE Facing Lathe was manufactured in 1998. Ideal for vertical turning applications, this machine offers robust construction and reliable performance. Consider the opportunity to buy this IRLE Facing Lathe vertical turning machine. Contact us for more information. Application Types Turning