Used Glass Edge Grinding Machine for sale (67,590)

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding Rjdpfxjyncpvo Abhjw - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Drive motor 4 kW Oscillation motor 0.75 kW Belt speed 22 m/s Pneumatic belt tensioning Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Redpfx Abozg Itvehew Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Rsdpfxsw Aig Se Abhow

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation Redpfx Aezhuv Hjbhsw unit spacing 200-1290mm screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Rjdpeq A N Nujfx Abhjw Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Rsdpjzhaz Ijfx Abhow

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Redoy Sqh Aepfx Abhow

Condition: used, Year of construction: 2004, machine/vehicle number: 7202, CNC control FANUC POWER MATE, workpiece conveyor belt, fleece filter system, and HYFRA cooling system Rodpfx Abey Sqhvehjw

Year of construction: 1989, condition: used, machine/vehicle number: 73903, comprising: KOENIG & BAUER rough grinding machine, year 1977, serial no. 73903 and KOENIG & BAUER finish grinding machine, year 1989, serial no. 720500007, with electric workpiece feeding and loading system, BEKA UPE central lubrication system Rsdpfxey Sqh Ns Abhow

Condition: used, Grinding wheel diameter 300 mm, max. grinding length approx. 600 mm, with coolant system and KNOLL fleece filter unit Rodpfx Aoy Sqkkjbhow

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm Rsdpfx Aey Ty Riebhjw weight of the machine ca. 7,9 t

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Rsdpoy Ty N Sefx Abhow

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 rpm Workpiece spindle max. speed: 1200 rpm Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Rodpfxeycim Ds Abhew Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Weight: 1600 Kg

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Redpjzgvlyofx Abhsw

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Redpfexzl Aqsx Abhjw Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: excellent (used), SCM contura in excellent condition Rjdpfxot E T I Ne Abhjw

Condition: excellent (used), SCM internships in excellent condition Rodpot Hkq Rsfx Abhsw

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. Rjdpfx Abszhrdujhew The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm Redjx Aq Egopfx Abhow max. workpiece weight: 60 kg without filter *

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm Rjdezgw I Njpfx Abhow max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories *

Condition: used, Year of construction: 2014, functionality: fully functional, grinding length: 600 mm, grinding width: 300 mm, Main machine data: - Table size (W x L): 600 x 300 mm - Electro-magnetic chuck: 300 x 600 x 70 mm - Grinding wheel size: 355 x 25 x 127 mm Drive performance: - Spindle motor: 2.2 kW Machine dimensions: Dimensions: - Length: 2,300 mm - Depth / Width: 1,550 mm - Height: 1,950 mm - Machine weight: 1,650 kg Standard equipment: - CNC-controlled vertical feed AD1 - Electro-magnetic chuck - Automatic demagnetizing device - Electronic cross-feed adjustment via operator panel - Coolant system with extraction, paper filter, and magnetic separator - Parallel dressing device (head-mounted) Rsdpfoyyymwex Abhjw - Dressing device for table mounting - Motorized rapid traverse adjustment (vertical) - Grinding wheel flange - Grinding wheel - Halogen lighting - Balancing arbor - Balancing scale - 1 set of splash guards Incl. 3 grinding wheel flanges Incl. fine-pole electro-magnetic chuck 300 x 600 mm Pole pitch: 3 mm, pole width: 1 mm Instead of standard electro-magnetic chuck

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Rsdpfx Aewka N Tjbhjw Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Rsdpjyulfaefx Abhjw Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Rsdpfx Absw Tfw Hjhew Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min. Power consumption approx. 11 kW Rjdpfswka Tljx Abhsw With heated infeed fence With quick-heating glue pot Pneumatic roller end trimming up to 3 mm With cross-cut saw for edge thicknesses up to 5 mm Milling station optionally equipped with combination indexable insert cutters for radius, straight, and chamfer milling Outrigger, foldable and extendable to the front With undercarriage With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim