Used Hole Series for sale (6,736)

Condition: used, mileage: 5,70,000 km, power: 460 kW (625.43 HP), first registration: 05/2018, empty load weight: 7,530 kg, maximum load weight: 19,000 kg, axle configuration: 1 axle, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, load capacity: 11,470 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, onboard computer, • Hydraulic tipper system • Air horns • Rotating beacons • Air conditioning • Bluetooth Itsdpszr R Tpefx Agpjk • GPS • Sleeper cab • Differential lock • Cruise control and speed limiter • Sunroof

Condition: as good as new (ex-display), Receiving table for LT series machines Itedpfx Aezn Iu Njgpek Length: 1.8 m Height: 765 cm Width: 638 cm

Condition: excellent (used), Compart machines - German, for cutting registers in books, holes. 6 pieces ready to work Itodewm Hn Uepfx Agpjk

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm Ijdpex S Ehwjfx Agpstk - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: good (used), Year of construction: 1992, machine/vehicle number: 576892, Offer 25455 Hydraulic Flat Profile and Bar Steel Shear with Notching Device and Punching Station Technical Specifications: - Flat Bar Shear: cuts up to 300 x 15 mm - Profile Steel Shear: cuts L-profile steel at 90° up to 120 x 12 mm - Bar Steel Shear: - cuts round steel up to 40 mm - cuts square steel up to 35 mm - Notching Device: with square notching unit 100 x 42 x 10 mm - Punching Station: - punching force: 600 kN - with stop table - throat depth: 220 mm - punches in steel up to 28 mm Ø in 15 mm or 38 mm Ø in 11 mm Itsdpfx Agjx S Ib Hspek - various punch and die sets included - Drive: 400 V / 4 kW - Space requirements: approx. W 600 x H 1550 x D 1500 mm - Weight: approx. 1300 kg

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Approximate technical data: - Pressing force: 30 tons - Maximum sheet thickness: 10 mm - Maximum punching diameter: 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 - 70 mm - Overhang: 560 mm - Maximum stroke rate: 120 strokes/min - Single stroke / continuous stroke - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg - Includes: - Stop table with stops - Foot pedal Itedelnkc Uspfx Agpok - Emergency stop button - Quick tool change device - Various punch and die holders

Condition: good (used), Year of construction: 1990, machine/vehicle number: X0006, Offer 25364 Technical Data: Iodpfx Agjx I Nc Ropstk - Punching force: 200 kN - Max. sheet thickness: 6 mm - Max. punching diameter: 90 mm - Stroke: 42 mm - Throat depth: 400 mm - Maximum strokes per minute: 200 spm - Installation height: mm - Drive: 400 V / 3 kW - Required space approx.: W 1000 x H 1650 x D 1200 mm - Weight approx.: 1400 kg - Including: positioning table, quick-change punch device, foot switch, emergency stop switch, various punches and dies The machine can be inspected by appointment at the 63322 Rödermark site. Company Erich Mieth: Tel. 06074-90877 Monday - Friday: 9:00 am - 12:00 pm and 2:00 pm - 5:00 pm The price includes 19% VAT. You will receive an invoice with VAT shown separately. Sale to commercial customers only. Payment by bank transfer before collection of the machine.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW Itjdpfx Aspuy H Djgpek - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressing force 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm Iedpfx Aoit T Hyjgpjtk - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm Iodpsrgptijfx Agpjtk - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm Ijdpfx Agjrll I Ujpetk - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: new, functionality: fully functional, The Robbi OMICRON 32 CNC Series was developed in response to need for medium-high production volumes. The machine can be equipped with automatic measurement devices to process complex components and is equipped with the latest-generation of SIEMENS 840D sl control system. Machine Specifications CNC 3206 Maximum distance between centres 630mm Maximum grinding length 630mm Height of centres over table 160mm Swing over table 315mm CNC 3210 Maximum distance between centres 1030mm Maximum grinding length 1030mm Isdpfsnzia Djx Agpjtk Height of centres over table 160mm Swing over table 315mm Machine is equipped with: CNC SIEMENS SINUMERIK 840D sl, PCU 50.3 Wheel head and table automatic electronic feeds controlled by brushless motors Incremental optic rule for micro positioning of wheelhead Table manual swivelling system for taper grinding with dial gauge Re-circulating ball screw with preloaded nut for wheelhead and table movement Anti-friction material on wheelhead guides Electric installation, in cooled cabinet Hydraulic unit for tailstock control Pneumatic unit Centralised lubrication Factory build machine

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Itodpfsy E Twaox Agpsk Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: used, This listing is for Specac Quest Single reflection ATR FTIR Accessory Iodpfx Aeztqgxjgpetk The unit is in full working condition and ready for immediate use The Specac Quest is a high-performance single-reflection ATR accessory designed for mid- and far-infrared spectroscopic sample analysis, featuring interchangeable crystal pucks and durable optic Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. [[1]()]

Condition: used, Year of construction: 1997, Used machine Iedjzlbqfepfx Agpjtk Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm Itedpfx Ajzk N S Uogpok - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Iedpjzk N Dwsfx Agpjtk Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Itodpfx Aezk N A Tjgpek Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Weight: 420 kg Availability: at short notice Location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm Iedjzk N Atspfx Agpjtk - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine Condition: as expected for its age for efficient dowel hole drilling in longitudinal and transverse mouldings for framed doors, door panels Drawer components Crossbars of all kinds 3-spindle motor Spindle spacing 25/25 mm Iedpfxezk Ny So Agpetk Stroke: max. 80 mm Motor: 1.5 PS Work table 260 x 130 mm Height adjustment from 5–40 mm according to scale with repositionable folding stop Foot valve control NRW

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Iodpozk Nuvefx Agpetk Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight: 420 kg Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. Itjdpfozk Nuiex Agpek - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach

Year of construction: 2022, condition: good (used), Machine is in good working condition. Still in production. Itjdpfx Aszlaqdsgpsk Parts shown by hand not come.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Itedpfx Agswpunbepsk Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Iodezk Nq Dopfx Agpjtk Driven by any hand-held drill Working width 650 mm with 7 drill shafts Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Minimum drill hole spacing: 30 mm Availability: at short notice Storage location: Flörsheim