Used Hole Series for sale (6,335)

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. Gjdpfx Asyaw Ecebhsip One touch, More Welding Solutions, Stocks for sale!!

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW Giodew Ekfuepfx Abhep MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Year of construction: 2015, operating hours: 15 h, condition: like new (used), functionality: fully functional, Mobile vacuum cleaners for laboratories and production Gsdpfx Aev I R R Rebhsip Cleanroom vacuum cleaner series CR Safety Change DBGM Pre-separator ES VA

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Giedohv U S Nspfx Abhop Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), 2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece Gedob A S Hmopfx Abhsip -Number: 71x available -Weight: 0.6 kg/piece

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Giodpfx Abowkir Dshjp Storage location: Nattheim

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Gijdpfx Abjxgfg Tshjp Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-frame press with ram table, calibration press • Press capacity: 6-40 T (adjustable) • Maximum installation height: 700 mm • Usable area of lower table: 1000x600 mm • Usable area of ram: 1000x600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 units at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (WxDxH): 2,100x1,600x3,500 mm • Total weight approx.: 3,500 kg • T-slots and bores can be manufactured to customer specification. Gijdpfx Aexrby Hebhop HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 unit) • Piston rod diameter: Ø 80 mm (1 unit) • Working pressure (max.): 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC POWER UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 unit) • Motor power: 4 kW (1 unit) • Pressure accuracy during press stroke: +/- 5 bar • The hydraulic unit is mounted on the upper rear side of the press. • Hydraulic block and valves by DUPLOMATIC. • A manometer is used to display the pressure. • Air and oil filters are manufactured by FILTREC. • An electronic oil level switch is used. • Air cooling (heat exchanger) is used to cool the hydraulics. • Pressure adjustable via pressure switch. • Control via sensor. • Protective cover (door) on the back of the press. • Safety light sensors and interior lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW • Total connected load: approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Interior lighting: Yes • Operating mode selector switch: Yes (lockable) • Electrical components by SIEMENS, ALLEN BRADLEY, SICK.

Condition: used, Year of construction: 2020, operating hours: 4,725 h, functionality: fully functional, working width: 1,600 mm, sheet thickness (max.): 100 mm, The 42 RB series is the RB machine, offering versatility for deburring, edge rounding, finishing, laser oxide removal and slag removal of different materials. This 42 Series 1600 WRb is equiped with a 300 mm magnetic track, including a wet dust extraction system from Ulmatec with ATEX certification. Giodpfx Asyudbmebhjp The machine has undergone a full service and has been fitted with a new conveyor belt.

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit various types 2 units RPM 1C, 0.73 kW – €450 each Gedpfx Asqv Ey Usbhjip 1 unit RPM 0.5C, 0.37 kW – €400

Condition: new, Year of construction: 2025, functionality: fully functional, The 10 series is Timesavers’ versatile starter model and the cost saving alternative for manual deburring, edge rounding, laser oxide removal, slag removal and finishing of metal. Gedpfx Abjyucq Tohsip

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, overall weight: 18 kg, type of input current: DC, input voltage: 220 V, total length: 691 mm, total width: 271 mm, total height: 271 mm, We are offering this like new GBC Pro Series 4600 laminator, manufactured 2020. Used just for a dozed A4-size laminated signs for our company´s internal use. Giedpfjyngyrox Abhsp Sad story: It appeared to be a useless purchase because in the the end we had no use for it in our bio-laboratory for organ-on-a-chip manufacturing. The device is for professional use in printing or copy houses.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2010, operating hours: 1,001 h, load capacity: 1,600 kg, lifting height: 5,250 mm, load center: 600 mm, fuel type: electric, overall weight: 1,428 kg, Crown 2300 Series Electric Low-Lift Pallet Truck, year of manufacture approx. 2010/2011, purchased used by us in 2019, with relatively low operating hours, little used. The pallet truck is operational, but does require repairs: see photos for damages, it also leaks lubricant in some areas. Vehicle weight with maximum battery weight: 1428 kg Giedpfxoytqc Uo Abhjp Load capacity with vertical lift mast (A=2500 mm, B=600 mm): 1600 kg Load capacity with vertical lift mast (A=5230 mm, B=600 mm): 700 kg Load capacity with vertical lift mast (A=4100 mm, B=600 mm): 1020 kg Load capacity with vertical lift mast (A=3000 mm, B=600 mm): 1600 kg We are offering it at a reasonable price (negotiable €1,000), preferably for self-collection; otherwise, shipping costs apply. If you have any questions or need more information, please do not hesitate to send us a message or give us a call.

Condition: ready for operation (used), Joystick box for Zeiss C99 controllers Giedpfefh Dpmex Abhop Box without speed override €750,--

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. Godpfx Abjh Dpv Rjhsip New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: Gijdpfexnlflex Abhep - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg Gisdpfek D Nt Dox Abhep

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) Gsdpsxyf E Nefx Abhsip • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, BOOSTON - Manufacturer of machinery and equipment for the prefabrication of frame houses. We offer a production line consisting of two tables and a transport bridge. 1. first assembly table - ER-01H/900 with a length of 9m - Table drive - hydraulic cylinders, hydraulic pump - Total width - 360cm (including 300cm plate) - Permissible load - 100kg/1m2 - solid powder coated steel construction - holes for SD-01 pressure cylinders ( 3 pcs in the set) 2. receiving table ER-05H/600 (6m) - on wheels - to be transported with a hook (pulling or pushing with a forklift) Giedpju I Rnmjfx Abhop - Mobile table that allows further processing of prefabricated elements in another place - Total width 230cm - Working height 70cm - 360-degree rotating wheels 3. transport bridge - MT-01 - load capacity up to 800kg - 360-degree rotating wheels

Condition: used, functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 2007, machine/vehicle number: CAT00D6GPC6G01049, Product Description Used caterpillar Bulldozer Manufactured by CATERPILLAR Model D6G2 Crawler moving type Maximum advanced power 190 kw Giodsumtipjpfx Abhsp Maximum rated speed 2200 rpm Transmission Type Powershift Operates on Diesel engine Machine sold as its condition Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Giodpfx Aexpwf Tjbhjp Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: excellent (used), Number of agregats 1 St. Lock depth max. ca. 130 mm connected load 2,5 kW Godpjyi Hufjfx Abhoip vertical movement 100 mm

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Godpfx Ajv A Uw Debhjip Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: new, Year of construction: 2015, operating hours: 3,000 h, Operating hours: 3000_____Water tank 800 litresEquipped with: 160 cm dosing unit Side shift 60 cm to the right Prepared for GPS integrationOptional: Rear camera 120 cm dosing unit 500 or 1,150 litre water tank Surface water pump (leak and basket) High capacity side nozzles- Bracket for standpipe for hydrants Mounted on equipment carrier, e.g. B. Holder, Wille, Multihog Hand lance with 15 m water hose on the drumEquipment: Capacity per day: 17,000-35,000 m²/day* Operating speed with 100% weed coverage (min.): 0.5 km/h Average treatment speed: 3-5 km/h Operating speed with low weed coverage: min. 5 km/h Water consumption when controlling weeds (min.): 34 l/min Drive via hydraulic system of the carrier vehicle (min. 60l/min at 180 bar) 2 x high-tech burners 110 KW with at least 92% efficiency according to EN 303-2 Burner emission class: > EURO 6 Automatic water softening system with 5 L canister and level monitoring Control unit with touchscreen screen for controlling and monitoring the system in the carrier vehicle, data storage for 5 days and reading of the daily output via USB stick (Excel format) Preparation for GPS integration Water pressure at Weed control: 0.2 bar Water temperature on the plant during weed control: 98-99.6°C Active temperature control (software controlled - no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C) Burner drive: diesel or Aspen D biodiesel Burner tank capacity: 105 l Water tank capacity: 800 l Standpipe holder Rear view camera Sensor-based dosing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections Dosing unit: working width 160 cm, side working nozzles (2 left, 2 right), additional 2 high-performance nozzles left and right, with 60 cm side shift on the right Stainless steel hose reel with 15 meter hose and 20 cm hand lance Adapter and frame with support feet for mounting the unit on the carrier vehicle Water tank (plastic) 800 liters with C-pipe connection and level indicator, dry-run protection, water filter Standard color: RAL 9006 Weight heating unit (net): 560 kg (without water and fuel) Machine dimensions: (LxWxH) 3,500 x 1,750 x 1,600 mm Weight dosing unit: 340 kg,Storage location:null Giodpfx Asu Hf A Aebhjp

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Gisdpfx Abeq Dlznohjp Marcels Maschinen AG