Used Hydraulic Press for sale (36,945)

Condition: excellent (used), Year of construction: 1984, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, type of input current: three-phase, stroke length: 500 mm, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Lhsdpfx Asqy E I Reaben

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, actuation type: hydraulic, pressing force: 60 t, Equipment: CE marking, documentation/manual, Bending force 60 tonnes Bending length 2050 mm Clearance between the uprights 1700 mm Stroke: 265 mm Table height 900 mm Machine width: 3200 mm Lhjdpexfgqdjfx Aabon Machine depth: 1800 mm Height: 2900 mm Weight 5600 kg Very well-maintained condition

Condition: excellent (used), Serial number: 1003344 Year of manufacture: 2011 Ljdpsw U A U Eefx Aabohn Control: AMADA AMNC Press force: 50 tons Bending length: 2000 mm Clearance between uprights: approx. 1700 mm Opening height (daylight): approx. 470 mm Table stroke: approx. 200 mm Number of CNC axes: 8 Drive type: hydraulic Machine weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 65056, pressing force: 5,000 t, table width: 4,520 mm, table length: 2,150 mm, overall weight: 3,19,000 kg, stroke length: 900 mm, Equipment: safety light barrier, Pressure build-up time: 3.6 s Ljdpfxsxb Tple Aabohn Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Tool change device Mesh safety enclosure with light curtains

Condition: used, functionality: unexamined, pressing force: 3,200 t, For sale: Used Dieffenbacher hydraulic press with a pressing force of 3200 tons. Originally designed for heavy-duty forming applications in the metal and automotive industries. Condition: used. Lhodoxft S Ispfx Aabjn Location: Montenegro. Contact us for more information.

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 Ledowva I Hspfx Aabjhn 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: new, Year of construction: 2024, Hydraulic press MECAMAQ / C-frame series / 40 tons / type (PCC40) Technical specifications: - 40T force, activated by 1 double-acting cylinder (Ø130/Ø80). Lhedpfx Aaeuhchcsbsn - Dimensions of the lower plate 600x450mm, with "T" slots M12 (DIN650). - End of the piston rod mechanized for the attachment of Ø40x40mm tools. - Maximum opening 500mm. - Stroke of the hydraulic cylinder 250mm. - Outreach 250mm. - Hydraulic system with 2 speeds and automatic change of high speed by pressure activated by gear pumps. - Monitored hydraulic valves and hydraulic components installed on the machine according to hydraulic diagrams EN693 "Hydraulic system self-monitoring for hydraulic presses with downward stroke". - Maximum pressure of the hydraulic unit 300 bar. - Approach speed 28mm/s. - Working speed 7.5mm/s. - Retraction speed 45mm/s. - Motor power 4 HP (3ph. 400v 50Hz). - Stroke regulation by means of limit switches, with automatic retraction movement. - Pressure switch for maximum pressure regulation, with automatic retraction movement. - Activation of the machine by means of two-hand safety activation CAT.4. - LED lighting in the work area - Fixed side guard. - Machine color blue RAL5021 Scope of delivery: - User manual in ENGLISH with technical data for machine maintenance, machine in accordance with CE regulations. - The quoted price does not include any additional protective measures such as safety guards, fences, barriers, etc.; these must be taken into account depending on the location and specific working conditions.

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm working area, max.: 1100 x 350 mm piston stroke: 400 mm forward speed: 6,2 mm/s return speed: 6,8 mm/s motor power: 5,5 kW width: 1640 mm depth: 1000 mm height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally displaceable cylinder via rack, pinion and handwheel - Generous working area - Height adjustable table - Torsion-resistant design with welded steel - Pressure gauge Ljdek Nz Ntspfx Aabshn - Fine pressure adjustment - Additional hand pump

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m Ledpjxcblwofx Aabohn

Condition: good (used), functionality: fully functional, Year of construction: 1990, Press force: 250 t Bending length: 4000 mm Distance between uprights: 3000 mm Control: Cybelec ModEva RA Machine weight approx.: 22,000 kg Space requirement approx.: 4300x2700x3400 mm Equipment / accessories: - 2 bend supports in front of the machine - Control system retrofit to CYBELEC ModEva 15T - Two-person operation Lhjdpfx Aaexb Tifobon - Upper and lower tools - Die shifting - Crowning system - 2 bend supports - Controlled axes: y1, y2, x, R, z1, z2 - Tool clamping top and bottom

Condition: new, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Lhedpfx Aaoxfzpzebsn Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. Lhedpfx Asvq Rtkeabon - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? Lodofxyh Rspfx Aabehn :1200 ? :1200 ?

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm working area, max.: 1010 x 300 mm piston stroke: 400 mm forward speed: 7,12 mm/s return speed: 13,42 mm/s motor power: 4 kW width: 1600 mm depth: 850 mm height: 2450 mm Ljdsk Nz N Ejpfx Aabjhn Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Generous working area - Height adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 7500 This SCHAAL SEP63N was manufactured in 2012. It is a robust hydraulic stamping press with a nominal force of 630 kN and a stroke length range of 8-80 mm. It supports tool dimensions up to 710 x 710 mm and operates at a flywheel speed of up to 500 rpm. Power consumption stands at 130 kW, and it requires a 400 V operating voltage. Consider the opportunity to buy this SCHAAL SEP63N hydraulic stamping press. Contact us for more information. Application Types Stamping Lhjdsxb E Itepfx Aaben

Condition: good (used), functionality: fully functional, Year of construction: 1994, Pressure: 160 t Lhedpfexb Sm Nox Aabon Bending length: 3,200 mm Control unit: CYBELEC CybTouch 15 PS Machine weight approx.: 14,000 kg Accessories/Equipment: - Control unit retrofit March 2025 – CYBELEC CybTouch 15 - Foot switch - Tools

Condition: good (used), functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke length: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Lhsdpfx Aaoq Hdz Uobon Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: used, Hydr. spotting press MILLUTENSIL type BV 25 PM Machine. No. 632 / 25111 Year of construction 1991 Closing force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mm Frame width 900 mm Installation height max. 750 mm Installation height min. 230 mm Stroke of the upper table 520 mm Lifting speed infinitely variable 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 bar Tool weight on the table max. 2500 kg Tool weight on the upper table max. 800 kg Table height above floor 850 mm Motor power 4 kW Mains connection 380 Volt, 50 Hz - Upper table can be swiveled 360° by motor - Hydraulic ejector unit in the table with 120 mm stroke - M 14 threaded holes in the table - Hydraulically extendable table - Depth adjustment bar for automatic downward stroke limitation Lhjdpfx Aaetx E Rdsben Space requirement L x W x H 1550 x 1500 x 2000 mm Weight 1900 kg

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel - Pressure gauge - Fine pressure adjustment Lhsdek Nz Ndjpfx Aabsn - Additional hand pump

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Ljdpfx Asw Ul Aroabehn Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Lhjdpfx Aaeihf R Uobjn Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Lodpfx Astrpiioabjhn Weight approx. 200 kg good condition

Condition: new, Technical data: Capacity: 200 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight, approx.: 2600 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability Ledpfopl T Disx Aabohn - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: used, Double column hydraulic press RASTER ZEULENRODA (WALTER) type WUP S 60 Machine. No. 136 / 7 (156-165) Year of construction 1999 Basic machine built in 1987, completely overhauled in 1999 with new control system Pressure capacity 60 ton. Stand width 1090 mm Lateral column passage 265 mm (one-sided) Ram area 650 x 300 mm Additional plate on ram 990 x 550 x 60 mm Table surface 990 x 550 mm Plunger stroke max. 320 mm Installation height 330 or 390 mm Table height above floor 980 mm Hydraulic operating pressure 320 bar Rapid traverse downwards 75 mm/s Rapid traverse upwards 100 mm/s Working speed 17 mm/s Return speed 33 mm/s Motor power 15 kW (2x 7.5 KW) Mains connection 400 Volt, 50 Hz, 15.5 kW - Press safety control PILZ PSS 3056-1 + PXT 305 Com-LC - Manually adjustable limit switch cams for stroke limitation - 2-hand operation and electric foot switch - Press force adjustment via handwheel - ram plate additionally guided by 2 lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 175 mm - Through-hole table top Ø 100 with insert reduction to Ø 30 mm - Plunger plate with 18 mm T-slots, slot spacing 150 mm Lhsdpfx Aasuicg Uobsn - Additional ram plate without fastening grooves - Electrical cabinet on the side of the machine stand - Electrical circuit diagram - 2 monitored safety valves for the hydraulics - UVV for manual insertion work Space requirement L x W x H 1950 x 1000 x 2700 mm Weight 2.6 tons good condition

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area Ledpfx Aep Dt Uusabohn - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment