Used Meng Tub for sale (637)

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Width: 1209mm Height: 1800mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ijdpfxjyyxm Ae Anvsic

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 0751801060702, For sale: BLM GROUP BLM LT FIBER tube and profile laser cutting machine with Active Scanner, equipped with an IPG Photonics YLS-2000-CUT 2000 W laser source. The machine is fully operational, both technically and in production, and is in continuous use at a manufacturing facility (current laser beam operating time: 6,950 hours). The machine features an integrated automatic material loading and unloading system, significantly increasing production efficiency and operator convenience. Technical data: • Model: LT FIBER • Laser type: Fiber • Laser source: IPG YLS-2000-CUT • Laser power: 2 kW • Laser source year: 2018 Iiedsy Sf Eijpfx Anvec • Power supply: 380 V / 3-phase / 50 Hz • Installed power: 26 kVA • Machine weight: approx. 9,000 kg Machine advantages: • Fully production-ready • Equipped with ACTIVE SCAN and a seam position detection camera • Integrated loading and unloading system • Possibility to perform tests during operation • High cutting quality and precision • Regularly used • Ready for further operation Additional photos and videos of the machine in operation can be provided, as well as the possibility to inspect the machine under power on site. Price upon request

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to 230k!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Ijdpfx Ansyui Eksveic Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Iiodort Hurspfx Anvoc

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles Iiedpfsy H Db Esx Anvoc all stainless steel 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). Iisdpfxoyay Duo Anvjc - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments - Transport via conveyor belt - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). The machine is new and has never been used in production. It can be inspected and tested on site.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 41,124 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC035, laser hours: 12,753 h, laser power: 3,500 W, pipe diameter (max.): 240 mm, pipe length (max.): 12,500 mm, workpiece weight (max.): 400 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, 🔷 2016 BLM Adige LT8.10 CNC Tube Laser – 3.5kW CO₂ | 3D Tilt Head | 12.5m Load | Siemens Control Used 2016 BLM LT8.10 CNC tube laser for sale. 3.5kW CO2, Siemens control, 3D cutting head, 12.5m loader. Fully equipped with chiller & extraction. Iodpfxjy Ir Euj Anvoic 💡 High Performance 3D Tube Laser Cutting System – Fully Automated 2016 BLM Adige LT8.10 CNC Tube Laser, a premium 3D tube laser cutting machine designed for high precision, flexibility, and productivity across a wide range of tube and profile cutting applications. The LT8.10 is one of the most versatile machines in its class, capable of processing round, square, rectangular, and structural profiles (I-beams, channels, etc.) with high accuracy and repeatability. 🔧 Machine Details Manufacturer: BLM Group (Adige) Model: LT8.10 Year: 11/2016 Type: CNC Tube Laser Cutting Machine Laser Type: CO₂ Laser Source: Rofin DC035 (3.5 kW) Control: Siemens CNC ⚙️ Key Features 3D Laser Cutting Head with Tilt Capability (±45°) High precision angular / bevel cutting Fully automatic tube processing Designed for high productivity and flexibility Automatic parameter adjustments for optimal cutting performance Capable of cutting complex geometries and joints 📏 Tube & Profile Capacity Round Tube Diameter: Ø12 – 240 mm Square Tube: up to 200 x 200 mm Max Bar Length: 12,500 mm (12.5m infeed) Unloading Length: 8,500 mm Max Linear Weight: 40 kg/m Max Total Bar Weight: 400 kg ✔ Processes: Round, square & rectangular tube Flat oval & special profiles Structural sections (I-beam, U-channel, angle, etc.) ⚡ Laser & Cutting Capabilities Laser Power: 3.5 kW CO₂ (Rofin DC035) 3D Bevel Cutting: Yes (tilting head) Automatic Focus & Adjustment Systems High quality edge finish Ideal for weld prep & complex fabrication work 🧠 CNC & Software Siemens CNC Control System User-friendly interface Full program control and automation High precision motion control for complex cutting operations 🔄 Loading & Handling System Automatic Tube Loading System Infeed Length: 12.5 metres Outfeed Length: 8.5 metres Automatic tube positioning & rotation Multi-position unloading capability ❄️ Supporting Equipment Included Chiller: Cosmotec WLAD842207ZAS0 Extraction Unit: Donaldson Torit DCE 2DFP4-SPRK Full integrated system ready for production 🧱 Machine Overview The LT8.10 is designed to deliver high precision without compromising productivity, making it ideal for both high-volume production and complex custom fabrication. Its rigid structure, automatic handling systems, and 3D cutting capability make it a top-tier solution for: Steel fabrication Structural engineering Tube processing companies Automotive & industrial manufacturing 💰 Why This Machine? Proven BLM Group reliability High-end 3D tube laser capability Handles large diameter tubes (up to 240 mm) Fully automated system → low labour cost Complete package with chiller & extraction Excellent value compared to new Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2002, condition: used, MTM 70/C stainless steel tube mill for Ø 76 x 4 mm This high-performance MTM 70/C tube mill, specially designed for the production of stainless steel welded tubes with excellent forming and welding quality. Equipped with a powerful TRUMPF laser welding system, this line provides reliable and efficient production for a wide range of stainless steel tube applications. Main technical specifications Manufacturer: MTM SpA Model: MTM 70/C Tube diameter range: 18 – 76 mm Tube thickness range: 1 – 4 mm Welding system: TRUMPF TWL60 – 12,000 W Laser Welder Maximum line speed: 25 m/min Production speed: - Up to 20 m/min at 1 mm thickness - Up to 6 m/min at 4 mm thickness Scope of Supply The complete line includes: - Single motorized uncoiler. (x2) - Strip threading pinch roll. - Strip joiner with pinch roll and straightener. - Strip accumulator with inlet and outlet pinch rolls. - Pull control device. - Edge preparation unit (edge scarfing). - Tube forming machine (forming – laser welding – sizing). - Single blade flying cut-off. - Output conveyors and tube ejection system. - Tube ends polishing. - Automatic tube packaging system for square bundles. - Output conveyor for bundles. - Available tooling sets for: 21.3 / 26.9 / 33.7 / 35 / 42.4 / 48.3 / 60.3 - Cooling unit make KLH (Germany) - Complete electrics, pneumatics and hydraulics. Advantages of this tube mill ✓ Ideal for stainless steel precision tube production ✓ High-quality laser welding technology ✓ Robust European construction by MTM ✓ Complete automated packaging solution ✓ Wide dimensional production range ✓ Suitable for industrial, automotive, construction and process industry applications Machine available subject to prior sale. Inspection can be arranged upon request. Tube diameter range: 18 – 76 mm Tube thickness range: 1 – 4 mm Maximum line speed: 25 m/min Welding system: TRUMPF TWL60 – 12,000 W Laser Welder Available tooling sets: for 21.3 / 26.9 / 33.7 / 35 / 42.4 / 48.3 / 60.3 Iiodey Uhx Ropfx Anvsc Working Direction: Left to right Power supply: 380/50 V/Hz

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler Iiedpfxoy Uhxke Anvjc - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower Iiedpjxlf N Sefx Anvjc If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Iedpfx Aouluhwsnveic Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Iedpjxgc Arefx Anvoic Rectangular tube: 20 x20 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 1200 kg Length: 17296 mm Width: 4271 mm Height: 2933 mm

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Iiodpfx Anoy Efbkovec

Condition: new, Year of construction: 2025, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. Iodpfjnqzb Ijx Anvjic include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummable for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# Iijdovcbw Depfx Anvoc H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Iiedpfx Anjvcbrhovsc Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 14 kW (19.03 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are B, BF, BFR. Ø38mmx2mm BFR series makes bending, rotating and feeding operation automatically. Iiedpfxovx D Dxj Anvsc

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm Iodpfxovuqmxj Anvoic 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. DBFR series makes bending, rotating and feeding operation automatically.

Condition: ready for operation (used), * Brand: AEG / Aviteq * Model: vibrating chute * On stock: 2 pieces * 1 x: length 3000 mm - diameter 500 mm * with: two pieces vibration motors of each 1,3 kW * 1 x: length 5900 mm - diameter 500 mm * with: two vibration motors of 2.3 kW each Isdpfeywmb Ajx Anvsic

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm Iiedpfx Aeyh A Nyonvec · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm Iodpfxex Tt H Rj Anvsic

Condition: new, Year of construction: 2025, TR series is a laser pipe cutting machine focusing on heavy pipe processing, the use of traditional horizontal bed, high bearing capacity, with mobile gantry structure, can cope with a variety of complex cutting conditions, widely used in building beams, pipeline processing, steel structure industry. Big tube and profile laser cutting machine. Up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. Power: 3-12kW Max. Raw Material Length: 12500mm Round Tube Diameter: Φ70-Φ680mm Square Tube Side Length: □70*70-□480*480mm Max. Acceleration: 0.5G Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Isdomxl S Aopfx Anvoic Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine  Optimized piercing process - Technology package for tapping • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier Ijdpfx Aoyalb Eenvjic • 8-fold tool changer ...and many more options!

Condition: new, functionality: fully functional, Year of construction: 2025, Tube laser cutting machine 6m/6m 6000/12000W Laser source: MAX Photonics Iedpfjwty R Aox Anvjic Tube diameter: 20–350 mm Laser head: Raytools BS12K straight 2D head 6000 mm automatic loading, 6000 mm unloading Three vertical chucks Servo-assisted unloading table CNC control: FSCUT5000 EtherCAT-BUS CAD/CAM software: TubesT, Tube Pro Load capacity up to 500 kg

Condition: new, functionality: fully functional, control type: CNC control, Laser power - 6 kW Iiodpfxjwnq T Ro Anvsc Laser source - MAX Photonics CNC control - FSCUT3000 EtherCAT-BUS Software - CAD/CAM: Tubest, Tube Pro Processing area: Diameter - 15-240 mm Loading - 100-6000 mm Unloading - 100-3000 mm Load capacity - up to 300 kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m