Used Polishing Station for sale (8,370)

Condition: used, Condition: Used - Compatible Machine: EDGE BANDING MACHINE EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Iedpjvazxcefx Ab Isa

Condition: excellent (used), ERMIS automation for asphalt mixing plant control, year 2013 Ijdoxz Tkvjpfx Ab Ija

Condition: used, with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. Ijdpfswv Tqbsx Ab Iea - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), I am selling Weller WTCP-S soldering station. Price per 1pc. Iodpfou Svmvex Ab Ioa

Year of construction: 1975, condition: excellent (used), Dimeter of the drum: 525 mm Depth of the drum: 620 mm Volume: 170 Ltr. Capacity: max. 150 Kg. Isdofgd S Njpfx Ab Ioa *with Time-controller 0-60 min*

Year of construction: 2015, condition: like new (used), AUTOMATIC CLEANING, POLISHING AND DRYING SYSTEM The system was only used for testing purposes and consists of: 1 piece heated oil removal centrifuge 2 pieces circular vibrators for cleaning/polishing 2 pieces swiveling, heated drying centrifuges Furthermore, it is possible to run 4 different media via the heated stainless steel tanks. The tanks, piping, and centrifuges are made entirely of stainless steel and are therefore especially suitable for acidic cleaning or pickling of components. Iodpfsxxbcuex Ab Ija Disassembly will cost approximately €20,000–30,000, but it can also be carried out by the buyer.

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Isdpfxoxwzhbo Ab Ioa Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The combined heat and power unit is sold professionally dismantled and free on truck. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: good (used), The scope of delivery includes: Isdpfewaiatjx Ab Ioa 1x pallet transfer station, used Material color: RAL 5010 Gentian Blue Total height: approx. 2,200 mm Total width: approx. 1,500 mm Currently in stock: 1 unit Your contact person: Mr. Joachim Pollmann Mr. Thomas Barth General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: refurbished (used), Year of construction: 2008, operating hours: 20,000 h, functionality: limited functionality, total length: 12,000 mm, total width: 11,000 mm, input voltage: 400 V, pressure: 8 bar, air pressure: 8 bar, input frequency: 50 Hz, type of input current: three-phase, power: 60 kW (81.58 HP), Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Iodsxxaitjpfx Ab Ioa

Condition: excellent (used), Professional measuring station from the renowned brand DIATEST Germany, equipped with a precision digital indicator Mitutoyo ID-C112B (Code No. 543-250B). The set is intended for precise measurement of heights, depths, diameters, clearances, or rolling elements in measurement labs, workshops, and quality control departments. • Base manufacturer: DIATEST Germany • Indicator: Mitutoyo ID-C112B / Code No. 543-250B • Measuring range: 12.7 mm • Resolution: 0.001 mm • Functions: "ZERO/ABS", "HOLD", "mm/inch" Iodpfx Absxuibwj Iea • Sturdy cast iron base with adjustable table • Technical condition: very good, functional, ready for use • Minor signs of use on the base's paint The price refers to one piece (complete set: base + Mitutoyo indicator). Shipping or personal pickup possible.

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 15 13F-1 PN, CONTROLS .. SIEMENS 15 13F-1 PN 1. General Description The draw-oil preparation system is designed for the optimal treatment of un-drawn tubes prior to the drawing process. A large-volume draw-oil bath ensures homogeneous wetting of the tube surface, providing uniform lubrication, reducing friction during drawing, improving the tube surface quality, and increasing tool lifetime. A constant material flow as well as stable bath temperature and bath quality make this system a critical process step in efficient tube production. _____ 2. Performance Data & Capacities • Tube diameter range: 18–75 mm • Bundle weight: maximum 5 t • Maximum tube length: 9 m • Bath volume: 20 m³ • Electrical supply: 400 V / 180 A / 50 Hz • Operation mode: Semi-automatic _____ 3. Functional Principle Immersion Bath & Medium Conditioning Iodpfx Ajxwkytjb Ioa • Uniform lubrication through full immersion in the draw-oil bath • Tubes integrated in the tank walls serve for oil heating via the furnace heat-recovery system • Oil circulation: Chemetall process, 12 cycles per hour • Prevention of water pockets: Precise water dosing; compressed-air injection if required • Bath composition control: Regular sampling • Dosing station: Automatic adjustment of oil and water additives _____ 4. Measurement & Control Parameters The following process parameters can be monitored and controlled: • Immersion time • Drip-off time & park time at all 3 drip stations • Crane inclination during immersion • X and Y axis positions • Crane speeds • Cycle types: Mix, Activate/Deactivate, Automatic, Pause, Cycle, Cycle interruption _____ 5. Control System & Safety • Siemens PLC: CPU 1513F-1 PN • Software: TIA Portal V15.1 • HMI: Siemens TP1200 Comfort Panel • Safety concept: Complete risk assessment available • Includes control cabinet, electrical documentation and software backup _____ 6. Automatic Overhead Crane • Type: Matr. 2981 t.6.5 • Travel speed: up to 40 m/min • Class: A6 (FEM 1.001 – ISO) • Wheels: 4 pieces, Ø 315 mm • Track gauge: 13,000 mm • Weight: 8,000 kg • Motor: FC90LFECCL-4, 1.5 kW, IP55 • Brake: Disc brake, DC 400 V • Gearbox: TP 315/90BR, ratio 1/35 _____ 7. Components Included in the System • Loading cart • Immersion tank • Medium circulation pump • Portal crane / automatic overhead crane • Drip-off station • Unloading cart • Extraction system • Dosing unit • Control cabinet & operator panel _____ 8. Documentation • Operating manual • User manual • Electrical & control diagrams • Declaration of conformity • Software backup

Condition: excellent (used), Here we offer you a DÜRR test station for adhesive heads. DÜRR test station for glue heads included (5 robot guided glue heads) DÜRR test station (self-built Dürr) for the automotive industry Weight: 1200 kg Type: DÜRR test station for glue heads Ijdpfx Abomhftdo Isa Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Double polishing stand Left side diameter 300 mm Right side diameter 250 mm Speed 1400 rpm Drive power 1.5 kW Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Isdpfx Aewnrb Nob Ioa D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Iodsxzqrqjpfx Ab Iea Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Year of construction: 2008, condition: used, “Alan Richardson” automatic pipe polishing machines can also be used for grinding, removing dirt, oxidation, rusting. The machine is in good used condition, fully working. Can be tested. Specification: Model: Alan Richardson Iodpfx Ajph T N Sob Isa Made in: England Year: 2008 Pipe length up to: 1700 mm Documentation: included Place: Marijampole, Lithuania If you have more questions, we will be happy to answer them.

Condition: excellent (used), Knuth-Rotor 2 grinder, grinding machine, lapping machine Voltage: 220 V Power: 150 W Polishing disc (ø): 200 mm Ijdpfxovb H Dgj Ab Ija Space requirement: 700 mm x 560 x 240 cm. (L x W x H). You are welcome to take a look. We will be happy to arrange a cost-effective shipping company to arrange for you!

Year of construction: 2014, condition: used, JetPetroClean container washing station Iodpfjhgimdox Ab Ioa Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: excellent (used), Mahr Type: MarSurf GD 140 BG 22 Product Information: The MarSurf GD 140 is a high-precision roughness and waviness measuring station from Mahr, designed for use in production metrology and in the measuring room. It sets new standards in surface metrology with its high speed, reliability, and flexibility. Product Features: Multifunctional: Measures roughness, waviness, and profile of workpieces. Location: Can be used in the measuring room or in close proximity to production. Software: Control via user-friendly MarWin software: EasyRoughness MarWin Software Version: V12.20-06 SP1 Areas of Application: Industry: Mechanical Engineering Typical Measurement Objects Bearings, threads, threaded rods, ball screws, shafts, gear racks Industry: Production Metrology Typical Measurement Objects Contour Measurement in Semi-Automatic Processes Industry: Automotive Industry Typical Measurement Objects Steering, braking systems, transmissions, crankshafts, camshafts, cylinder heads Industry: Medical Technology Typical Measurement Objects Contours of hip and knee endoprostheses, medical screws, and dental implants Technical Specifications – MarSurf GD 140 Feature Value / Description Resolution – Measuring Range 1 / 2.0 nm Resolution – Measuring Range 2 / 0.2 nm Start of Traverse Length (X) 0.1 mm End of Traverse Length (X) 140.0 mm Traverse Length (Lt) 0.1 – 140 mm Guide deviation 0.20 µm / 60 mm 0.40 µm / 140 mm Measuring force 0.7 mN Measuring speed 0.02 mm/s to 10 mm/s Positioning speed (X) 0.02 – 200 mm/s Positioning speed (Z) 0.02 – 50 mm/s Probe system: Roughness probe system (skidless) – without probe base Probe arm lengths Isdpfxjwlhwne Ab Iea 45 mm (×1) 67.5 mm (×1.5) 90 mm (×2) 112.5 mm (×2.5) 135 mm (×3) Measuring range (depending on probe length) ±250 µm (with 45 mm probe arm) ±750 µm (with 135 mm) Probe arm) Technical specifications – Dimensions: Dimensions (L × W × H) Length: 780 mm, Width: 535 mm, Height: 1240 mm Maximum workpiece weight: 90 kg Additional functions Manual TY adjustment (e.g., for lateral alignment) Total weight (gross): 196 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2022, A Big Bag filling system TeknoConvey is available. Filling capacity: 300kg-1000kg/h, machine dimensions X/Y/Z: approx. 1400mm/1400mm/3600mm. Includes crossbeam, hopper, walker and screw conveyor. Documentation available. An on-site inspection is possible. Ijdpoxyzf Sofx Ab Isa

Condition: like new (used), functionality: fully functional, total width: 250 mm, total length: 250 mm, total height: 100 mm, overall weight: 4 kg, Ultrasonic System for Polishing and Lapping JOKE ENESKA 2-1 As new, very little use Comprising: 1 x Control Unit NE 199 Iodpexxaalofx Ab Ija 1 x Ultrasonic Handpiece JUS-45 PB Tool Holder Technical Data Ultrasonic Handpiece: Model: JUS-45 PB Stroke Generation: Piezo element Weight (without cable): 140 g Dimensions: Ø 28 x 134 mm Technical Data Control Unit: Model: NE 199 Connection Voltage: 230 V 50 Hz Fuse: 250 V, 800 mA Weight: 3.2 kg Dimensions: 250 x 100 x 205 mm Sound Pressure Level: < 70 dB(A) The unit can be tested under power.

Condition: used, functionality: fully functional, 1 used grinding and polishing machine Manufacturer: ATM Model: Saphir 320 Isdpfexuq I Ssx Ab Ioa Year of manufacture: 2003 Technical specifications: 320 Series - Single wheel Plate/disc diameter: 200 mm Speed: 600 rpm Voltage: 220 V / 60 Hz, 1 phase Weight: 24.5 kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Ijdpfsxwcwwsx Ab Ioa Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: excellent (used), functionality: fully functional, mileage: 1,42,000 km, power: 70 kW (95.17 HP), fuel type: diesel, maximum load weight: 465 kg, first registration: 03/2021, next inspection (TÜV): 03/2027, emission class: euro6, energy efficiency: D, color: white, number of seats: 4, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, soot filter, traction control, FIAT STILO STATION WAGON N1, 4 SEATS, YEAR 2021, ONE OWNER, 1300 ENGINE, 100 HP, FULLY EQUIPPED Iedpfxsxyqigj Ab Isa

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser marking station Isdsv Hfu Uspfx Ab Ija Wavelength: 1064 nm Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2016, working width: 400 mm, Compact oil spreader / polishing machine Isdpfxexyvq Nj Ab Iea Manufacturer: Sarmax Year of manufacture: 2016 Spreader and polishing machine for applying oil or stain to solid wood floorboards, parquet, etc. Working width approx. 400 mm 1x polishing pad unit, infinitely variable speed control 1x brush unit, infinitely variable speed control Height adjustment per unit, manual via handwheel Feed speed infinitely adjustable Connection: 380 V Dimensions: 1600 x 1100 x 1700 mm Weight approx. 400 kg