Used Positioning Module for sale (13,274)

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev Hfsdpfozpwh Usx Aftjl • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, Industrial Universal Lathe CORMAK GOLIAT 660 × 4000 mm The CORMAK GOLIAT 660 × 4000 is a heavy-duty industrial universal lathe designed for demanding turning applications. With a 4000 mm distance between centers and a 105 mm spindle bore, the machine enables precise machining of large-size components while maintaining high rigidity and accuracy. It is an ideal solution for production plants, repair workshops, and companies specializing in the regeneration of machine parts. Main Features of the Machine 4000 mm distance between centers and 3950 mm turning length – designed for machining long shafts, pipes, and large components. Large 105 mm spindle bore – enables efficient machining of large-diameter workpieces. Heavy-duty cast iron bed – hardened and precisely ground, providing excellent resistance to twisting, vibration, and deformation. 3-axis digital readout system – ensures accurate control of carriage and slide positions. High-quality spindle bearings – guarantee smooth operation, stability, and long-term precision. Rapid feed system – longitudinal rapid feed of 4.5 m/min and cross rapid feed of 1.9 m/min significantly reduce machining time. Removable bed gap section – allows turning of oversized components with diameters up to 870 mm. Direct thread selection – enables quick adjustment of threading parameters without changing change gears. Precision and Functionality Hfjdpfxjvw Abgo Aftol The CORMAK GOLIAT 660 × 4000 conventional metal lathe provides a wide range of machining operations, including external and internal turning, metric, imperial, module, and DP threading, drilling, broaching, and taper turning. Standard Equipment 3-axis digital readout system (optical scales) Self-centering 3-jaw chuck, 320 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Coolant system Work lighting Chuck and tool post keys Complete set of operating tools Operating manual CE Declaration of Conformity Technical Specifications Parameter Value Maximum turning diameter over bed Ø660 mm Maximum turning diameter over cross slide Ø420 mm Maximum turning diameter in bed gap Ø870 mm Bed gap length 240 mm Distance between centers 4000 mm Maximum turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm, 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feeds 65 ranges (0.063–2.52 mm/rev) Cross feeds 65 ranges (0.027–1.07 mm/rev) Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Lead screw pitch 12 mm Spindle axis height above tool surface 28 mm Tool size 25 × 25 mm Maximum compound slide travel 145 mm Maximum cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power / flow rate 60 W / 25 l/min Machine dimensions (L × W × H) 5500 × 1100 × 1450 mm Machine weight 5200 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine Hjdpfxsyi Ekfe Aftofl • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Hfsdpfx Afezphccjtsl Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis Coord3 ARES NT-L 10.7.5 CNC was manufactured in 2018. It features a high-precision RENISHAW PH20 motorized indexing probe head, RENISHAW UCC controller, and a robust aluminum alloy frame. The machine includes a black granite worktable with threaded holes for secure workpiece fixation. Ideal for detailed 3D measurements with a maximum speed of 500 mm/sec and acceleration of 1700 mm/sec². Contact us for further details regarding this machine. Additional equipment • Air-cooled drying system • CE compliance certification • Equipped with an air filter and regulator system • High-precision RSF optical scales and sensors Machine Benefits Technical Machine Benefits • Air cushion bearings for structure support and increased measurement accuracy • Pneumatic counterbalance for the vertical probe holder • Automatic fall protection for head in case of air outage • All geometric and measurement checks executed under stable temperature conditions (20°c) as per iso 10360/2 standards • Resolution: 0. 0001 mm • Measurement accuracy: iso 10360/2 mpee = 2. 1 + 3. 0l/1000 μm • Maximum speed in 3d measurement: 500 mm/sec • Acceleration in 3d measurement: 1700 mm/sec² Extra Information Control Unit RENISHAW UCC controller kit TouchDMIS measurement software DELL AIO computer with 24” LCD TouchScreen monitor Tools RENISHAW PH20 motorized probe head 3 RENISHAW TP20 magnetic probe modules RENISHAW TCR20 probe changer RENISHAW 23-piece stylus kit 25 mm diameter ceramic calibration sphere with certification Mount Position (Assembly) Machine frame made from aluminum alloy Slide surfaces hardened with a special process Hfedpoyaiz Nefx Aftsl Black granite worktable with high wear resistance and threaded holes

Condition: new, Year of construction: 2024, Special offer price: €42,500 (instead of €48,500), excluding VAT. Available immediately! Included premium features: - Heidenhain ND5023 3-axis position display - 5-position longitudinal stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting Hfedpfx Aepq R Rdeftel - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse gears - Air supply to the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction-hardened and ground - Headstock with induction-hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free sliding of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chip guard with microswitch, turret plexiglass guard, rear guard along the entire machine length, protection of lead screw and feed rods, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Traveling and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) Hfedpfx Ajfnlkwsftel • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 Hsdpszugvrefx Aftefl • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Hfjdoxhfkuopfx Aftel Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hodpfx Aox Sx Htsftefl

Condition: used, mileage: 19,477 km, power: 90 kW (122.37 HP), first registration: 07/2025, fuel type: electric, overall weight: 2,550 kg, color: silver, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263321 Former non-binding recommended retail price from the car manufacturer: 58,556 ¤ 1st owner, accident-free, full service history, non-smoking vehicle ---- HIGHLIGHTS & PACKAGES * Winter Package * Active Safety Package * Mirror Package * Chrome Interior Package * Navigation Package * Auxiliary heater, electric * Imitation leather ARTICO / Microfiber MICROCUT ASSISTANCE SYSTEMS * Mercedes-Benz emergency call system * Breakdown assistance * Active Parking Assist * Rear view camera * Cruise control (TEMPOMAT) * Active Brake Assist * Braking system with ABS and ASR * Electronic Stability Program (ESP) * Active Lane Keeping Assist AUDIO & COMMUNICATION * Communication module (LTE) for digital services * Instrument cluster with color display * Digital radio (DAB) * Navigation Plus INTERIOR * i-Size child seat attachment * Wireless charging system for mobile devices * Floor mats, velour * Driver's seat, height adjustable with lumbar support * Warm air duct to the passenger compartment * Multifunction steering wheel * Seat heating for driver and front passenger * 2 USB ports in the center console, rear * Glove compartment, passenger side, closed * Steering wheel heating * Seatbelt for the center seat in the rear * Steering wheel adjustable in inclination and height * Leather steering wheel * Front passenger seat, height adjustable * Interior trim, upgraded design * Automatic climate control system THERMOTRONIC * 12 V socket, passenger compartment * 12 V socket, trunk / cargo area * Climate zone 2 (temperate) * Front electric windows with comfort operation * Electric windows in sliding doors * Mirror in the passenger sun visor * Trunk carpet * Passenger compartment carpet * Luggage compartment cover * Center armrest ARTICO & Door panels NEOTEX * Armrest with storage compartment * Pockets on the backrests of the driver's and front passenger's seats * Ambient lighting * Interior rearview mirror, automatically dimming * KEYLESS-GO * Door sill panels with "Mercedes-Benz" lettering * Shift knob, leather * Trim elements, high-gloss black * Trim element, instrument panel, high-gloss black * Speedometer, km/h * Headrests for the seats in the passenger compartment LIGHTS & VISIBILITY * LED High Performance headlights * High beam assist * Light and rain sensor * Interior mirror TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Child safety lock, doors and windows in the passenger compartment * Tire pressure monitoring system for front and rear axles, wireless * Automatic front passenger airbag deactivation Hedezwzr Hepfx Aftefl EXTERIOR * Sliding door rail cover in vehicle color * Heated rear window * VIN visible from the outside * Underbody protection, plastic * Handle strip above license plate in vehicle color * Fixed rear windows * Bumpers, painted * Exterior mirrors, painted black * Windshield, heated * Tailgate * Tinted glass in the rear, black glass * Sliding door, right, with window * Cargo compartment sliding door, left, with window OTHER EQUIPMENT * Approval M1 * Wheel formula 4x2 * Mercedes-Benz Mobilo with roadside assistance and extended warranty * Tires, no specified brand * Progressive * Vehicle registration certificate, part II * Signage / Printed materials, German * Standard * Windshield washer fluid reservoir with increased capacity * Model generation 0 * Standard version Further characteristics * 40.6 cm (16") light alloy wheels, multi-spoke design * AEJ X4/1 * MB-NA 60 2b with flange, low mounting position, M-g

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder Hfjdpey Nnnnefx Aftsl - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: used, functionality: fully functional, Gilson Nebula Series 215 Liquid Handler with 819 Injection Module The Gilson Nebula Series 215 Liquid Handler with 819 Injection Module is a high-throughput automated liquid handler designed for tasks such as sample transfers, dilutions, mixing, and reagent addition. With patented Dual Rail syringe drive technology and a capability to accommodate four or eight syringes, it is a versatile tool for laboratories. The 819 Injection Module enables effective sample injection onto the liquid handler and offers features such as high-pressure two-position switching valve for fraction collection. Features: Hodpfx Asuavlloftefl High-throughput automated liquid handling Patented Dual Rail syringe drive technology Accommodates four or eight syringes 819 Injection Module with high-pressure two-position switching valve Specifications Model: Nebula Series 215 with 819 Injection Module Automated tasks: Sample transfers, dilutions, mixing, reagent addition, microplate reformatting Features: Dual Rail syringe drive technology, high-pressure two-position switching valve Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Hfjdpfxjzkuirs Aftjl Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Hedpfxewfdiys Aftefl Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. Hedpfx Afozz Ei Rotsfl * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, Year of construction: 2009, Used overhauled filling triblock ALFATEK Elvira 16-20-3 year 2009 Initially, the ALFATEK Elvira 16-20-3 filling triblock, created in 2009, stands as a benchmark of engineering excellence for bottling in glass containers. 1. Model Description and Operational Capability Configured for an impressive throughput of 4,000 bottles per hour (BPH), it specifically targets handling 0.75-liter glass containers. Furthermore, the Filling Triblock Alfatek Elvira integrates three main operational modules: the rinser, the filler, and the capper. Each module is meticulously tailored for a distinct phase of the bottling process, ensuring a streamlined operation. 2. Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers, the rinsing system ensures containers are thoroughly cleaned before filling. Consequently, the gripping mechanism is ingeniously designed to handle glass containers with the utmost care, thereby preventing any potential damage. 3. Filling Mechanism Moreover, the filling segment incorporates 20 valves, operating on a high vacuum principle to achieve precise filling. This method not only ensures uniform fill levels across all containers but also allows for efficient dispensing of liquids of varying viscosities, thanks to the selection of fixed nozzles. Hfedovgt H Eepfx Aftol 4. Capping System Subsequently, the capping unit, fitted with three heads, is adept at applying aluminum screw caps with unparalleled precision. It demonstrates the exceptional versatility of the Filling Triblock Alfatek Elvira in handling various cap types, thus ensuring a consistent secure seal consistently. 5. Safety Measures and Maintenance Protocols Additionally, the Filling Triblock Alfatek Elvira adheres to stringent industrial safety standards, featuring comprehensive protective measures for operator safety. Presently stored under optimal conditions, it is accompanied by a complete set of maintenance manuals. This pivotal aspect is crucial for maintaining the machine’s operational efficiency and extending its longevity. 6. Electrical Specifications and Mechanical Design Requiring an electrical supply of 380 V at 50 Hz is perfectly aligned with standard industrial requirements. Moreover, its clockwise rotational movement is thoughtfully designed for seamless integration into existing production setups, thereby facilitating effortless adoption. 7. Conclusion of the Filling Triblock Alfatek Elvira In conclusion, the ALFATEK Elvira 16-20-3 triblock from 2009 epitomizes advanced engineering, effectively optimizing rinsing, filling, and capping operations in bottling processes. Its technical configuration renders it ideally suited for robust application within the bottling industry, achieving high marks for operational efficiency, precision, and reliability. The meticulous design assures compatibility with a broad range of bottling requirements, securely positioning it as a valuable asset in production environments. Ultimately, the incorporation of transition words aims to enhance the flow and coherence of the analysis, ensuring a comprehensive understanding of the machine’s capabilities.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Hfedjbatamopfx Aftjl Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 282015 SDU8300, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 45,000 rpm, table width: 1,500 mm, table length: 1,000 mm, total height: 2,200 mm, total width: 2,800 mm, total length: 1,950 mm, type of input current: AC, input voltage: 400 V, spindle motor power: 6,000 W, CNC machine for powerful machining. The steel/granite sandwich construction for the moving axes, such as the gantry and cross slide, can optionally be driven by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the massive steel/granite machine construction. The advantages of natural stone granite combined with high-strength, lightweight metal offer the highest stiffness while simultaneously reducing weight. This is the only way to achieve the desired dynamics and high feed rates. High-frequency spindles with up to 6.0 kW and 45,000 rpm with HSK25 / HSK32 tool holders are used as milling spindles. The 18-position tool changer (expandable to 36 tools), installed outside the working area, automatically moves from the protective housing to the milling spindle. With the 4th/5th axis designed as a swivel head and the integrated, high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is completed with new, state-of-the-art CNC control functions and an easy-to-use user interface. This allows for 5-axis simultaneous machining via RTCP (Rotation Tool Center Point) function. The control and operating components from Heidenhain include a touchscreen monitor and a comfortable handwheel. Different workpiece clamping systems can be mounted on the universal granite table via steel threaded bushings in a 150x150 mm grid. -Innovative steel/granite sandwich construction -State-of-the-art control technology based on Heidenhain -Automatic tool changer with tool measurement/inspection -Optionally with high-dynamic linear motors or ball screw drives -4th/5th axis as a swivel head or rotary tilting unit on the machine bed -RTCP, TLC, axis kinematics and clamping position compensation -Metal/granite sandwich construction -Rotary/swivel swivel head (4th and 5th axis) -High-dynamic linear motors in the X and Y axes -18-position tool changer, expandable to 36 tools -Heidenhain® TNC640 high-end control -Tool measurement by tool setter or laser -3D edge probe -Modern control panel -Water cooling -Heidenhain® LMT TT160 / optional laser measurement -3D measuring probe -Handwheel -Minimum quantity lubrication -Tool holders Ideal for machining: Brass Aluminum Ceramics Hfedpfx Aszzzylsftol Plastic Copper

Condition: new, mileage: 10 km, power: 206 kW (280.08 HP), fuel type: diesel, number of seats: 100, gearing type: automatic, color: yellow, Year of construction: 2026, MAN Lion's City 12 ? (Euro 6, 280 HP, ZF EcoLife 2) Purchase model: Lease with purchase option after 12 months, no additional interest charges. Capacity: 34 seats + 69 standing + 1 ? ? Model: MAN Lion's City 12 ? Engine: 6-cylinder D1556 diesel, Euro 6 standard ? Displacement: 9037 cm³ ? Power: 280 HP (206 kW) / 1200 Nm of torque ? Transmission: ZF 6 AP 1220 EcoLife 2 automatic with integrated retarder ? Door layout: 3-door (2-2-2), fully stepless entry ? Length: 12.2 m EQUIPMENT AND COMFORT: Hjdpozc Tyuefx Aftefl ? Air conditioning: Full Valeo (Spheros) REVO system with a high cooling capacity of 32 kW ? Heating: Convector and additional Valeo Thermo 300 parking heater ? Lighting: Full interior lighting, driver's station, and entry areas with integrated technology LED ? Passenger amenities: Right-hand kneeling function and manual wheelchair ramp by the second door ? Space: Separate space for a wheelchair or stroller opposite the second door ? Floor: Highly durable Altro Elan carpet (Medium Grey) DRIVERS' POSITION: ? Cab: Lion's City Pro type (semi-open), with separate luggage compartment ? Seat: Comfortable Isri Pro 2 with 3-point seat belt ? Multimedia: 7-inch monitor with rearview camera ? Dashboard: Ergonomic MAN layout compliant with the VDV standard SAFETY AND ASSISTANCE SYSTEMS: ? Braking systems: ABS, TCS, EBS, and parking brake function ? Assistance: Turn assist with visual and audible warnings, Forward Collision Warning and MAN AttentionGuard ? Exterior lighting: LED headlights with LED daytime running lights ? Extras: Tire pressure sensors on all axles and RIO Box connectivity module (FMS interface)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Hodpfjv Tm Aysx Aftsfl Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Hjdpfx Aey Ehrxoftjfl Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, onboard computer, - 1 fuel tank - Halogen headlights - Multifunction steering wheel Hodsy R Davjpfx Aftsfl - PTO - Spare wheel holder - Sun visor LOOKING FOR A SPECIAL TRUCK? WE’VE GOT YOU COVERED! The Mercedes-Benz Arocs 1836 AK 4x4 Container Carrier is for sale and has been configured for professional transport operations where off-road mobility, flexibility and reliable container transport are essential. Powered by the proven Mercedes-Benz OM460 12.8-litre EURO-III engine producing 360 HP and 1,800 Nm of torque, this permanent 4x4 Arocs combines Mercedes PowerShift 3 with a heavy-duty all-wheel-drive chassis and specialised 20ft container carrier body. The container platform has been engineered by Schaften Automotive to securely accommodate standard 20ft containers using dedicated container locking points and a robust chassis-mounted support structure. A 10-ton Dragon Winch installed at the front further increases operational versatility. This Arocs is available for worldwide export. QUICK HIGHLIGHTS ✔ Mercedes-Benz Arocs 1836 AK 4x4 ✔ Permanent All-Wheel Drive ✔ Mercedes-Benz OM460 12.8L EURO III Engine ✔ 360 HP (265 kW) ✔ 1,800 Nm Torque ✔ Mercedes PowerShift 3 ✔ PowerShift Advanced ✔ 20 ft Container Carrier Platform ✔ ISO-Style Container Twistlock System ✔ Schaften Automotive In-House Body Construction ✔ Dragon Winch – 10 Ton Capacity ✔ Heavy-Duty Off-Road Chassis ✔ Factory PTO ✔ Hot Climate Cooling Package ✔ Cyclone Dust Filtration ✔ N3G Off-Road Vehicle Classification ✔ Cross-Country 365/85 R20 Tyres ✔ Ready for Worldwide Export Built for 20 ft Container Transport Remote transport operations often require equipment that can perform far beyond conventional road conditions. The Mercedes-Benz Arocs 1836 AK combines a permanent 4x4 drivetrain with a purpose-built container carrier platform designed around the dimensions of a standard 20 ft ISO container. The body has been constructed by Schaften Automotive using a heavy-duty steel support structure integrated with the truck chassis. Dedicated twistlock positions secure the container at its corner castings, creating a stable connection between vehicle and load while still allowing the container to be removed when operational requirements change. This makes the truck particularly useful for operations where containers are used as mobile workshops, equipment stores, technical units, command centres, mobile hospitals or general cargo modules. Schaften Automotive In-House Container Body A container carrier used in demanding environments needs more than a basic flat platform. The body has been developed in-house by Schaften Automotive with durability, simplicity and practical field operation in mind. The structure is designed to distribute the container weight across the chassis while providing a robust mounting foundation for repeated commercial use. The integrated twistlock layout allows a standard 20 ft container to be positioned and secured directly onto the carrier platform. This creates a versatile vehicle that can work with different containerised solutions without permanently dedicating the chassis to one application. We even added a modified stair for easy entering the container if needed. By engineering and assembling the body in-house, Schaften Automotive combines proven Mercedes-Benz...

Condition: ready for operation (used), Siemens 6SL3210-1SE21-8UA0 Sinamics Power Module 340, serial number XABD05-005099, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdpoz Ax A Tefx Aftsfl

Condition: used, mileage: 40,131 km, power: 316 kW (429.64 HP), first registration: 09/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special confirmation for heavy-duty/municipal operation i=2.53 Full brake assist, roll-away lock, emergency brake signal, acoustic reversing alarm, OBD-E, idle speed driving, free swing, straight trailing axle - steered and liftable, emergency steering pump, digital axle load indicator for air-sprung axles and trailers Driver's comfort seat with heating and armrest, multifunction steering wheel, Basic instrument cluster, Moon Grey, refrigerator, ASR, 7" navigation system, sound system, KSM module and FMS interface PTO gearbox-dependent (continuous operation + shiftable) Type NH/1c without flange, f=0.76, position approx. 2:30 o'clock Transmission shift blocking during power take-off operation Body weight basic version approx. 4400kg 14 lashing eyes + towing rings - tractive force 10000kg recessed in the outer frame, outer frame clad with aluminum checker plate over the entire length, 2 hydraulic drive-on ramps 2-piece - approx. 4350mm long - approx. 850mm wide, hydraulic cable winch approx. 6.3 t tractive force with radio remote control, 2x aluminum tool box, LED light bars Hfedpju Rzmfofx Aftol