Used Pre Heater for sale (48,057)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Isdpfx Asu Thhrob Ioa Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Fully automated system Energy saving Industry 4.0 Iodpfxjg Adn Io Ab Iea Durma Cloud Fiber Laser Technology Environmental awareness Synchronous minimum working range High precise repeatability High process accuracy Compact layout Low noise level Simple and fast installation On request we will send you information material

Year of construction: 1998, condition: excellent (used), Dryer Digicolor Type: Heater Mode: EH 15 AC - T Iedpoi T Hzzsfx Ab Ija Year 1998 Plus,Suction appliances

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz Iedpfxolhqndo Ab Iea - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: Ijdpfx Aboga Dite Iea max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Condition: refurbished (used), Year of construction: 2008, power: 90 kW (122.37 HP), This would be the fan / blower 90 KW , BJ 08 Completely overhauled, ready for use. VK 8000€ net Ijdorp Dlwepfx Ab Ija

Condition: good (used), Pre-melting Polyurethane Glue for Edgebanders - Available No. 4 Units Iedpovkpcdsfx Ab Ioa Model MC 12, CE

Condition: as good as new (ex-display), Year of construction: 2025, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washing pump (Lowara), spray system with stainless steel nozzles additional manual cleaning with high pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - useful height: 490 mm - max. loading weight: 200 kg - Spray pressure (washing pump): 2.3 bar - spraying pressure (HD pump): adjustable up to max. 60 bar - tank volume: 175 litres - Heating: electrically adjustable (RT - 60°C) - plant dimensions (LxWxH): 1.300 x 1.500 x 2.100h mm - empty weight: approx. 200 kg ++washing time clock freely adjustable (minutes and hours) ++complete cleaning machine (interior and exterior cladding) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2.000 micron) ++Operating hours counter ++Steam vapour extraction incl. condensate recirculation ++Omron timer for setting the time in sec./min./hour. Parts washer is as good as new (test plant/technical centre); Year of construction: July/2021 Ijdpfx Abod R Ahls Ija OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse Isdpowi S R Tsfx Ab Ioa

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Iedpfx Ajvrip Hjb Iea

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: 02/510/004, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, bending force (max.): 225 t, working width: 4,100 mm, stroke length: 265 mm, number of axes: 4, table height: 800 mm, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, overall weight: 22,000 kg, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: centralized greasing system, documentation/manual, emergency stop, foot remote control, Used press brake with new integrated Visitouch 19" 2D CNC control. Hydraulic punch clamping. Backgauge with X and R axes. Available for immediate delivery. Isdpfxjw I A Nco Ab Ija

Condition: refurbished (used), total width: 1,600 mm, total length: 3,500 mm, Insertion Length 3500mm Width inside 1600mm Iodpfjrp Dmiox Ab Ija Vk 12000€ Completely refurbished Cutting edges renewed Scraper bars very good Incl. cylinder Only for installation

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Year: 2008 Viewing by telephone only! Iedjmnqbwspfx Ab Ija Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: refurbished (used), Year of construction: 2006, operating hours: 5,900 h, functionality: fully functional, Universal shredder Haas Tyron 1500 hook lift. Machine in good and functional condition. Iodpfx Abevl Hxlj Ioa

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Type: SKP26 Constr. year: 2003 diameter range: 26 mm Iedpfxowi Thge Ab Ioa drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm capstan diameter: 1300 mm Location: Germany

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Iodpfx Abjh Eyqve Ija Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Photos show original condition.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 100 kW (135.96 HP), overall weight: 45 kg, total length: 1,650 mm, type of input current: AC, input voltage: 400 V, heating capacity: 100 kW (135.96 HP), warranty duration: 6 months, Becker AB, IMMERSION HEATER 100KW Brand: Backer • Series: Immersion Heater • Type: Tubular Heater • Material: 1.4835 High corrosion resistant stainless steel (316) • Model: 100 kW • Part number: 6052060201 • Volts: 400V x 3 • Phase: 3 • Amps: 144 • Hz: 50 • Kw: 100 • Cable connectors: 8 MM Ijdpfouadqpex Ab Isa • Sensors: two Jumo PT100 sensors integrated • Weight: 45 Kg • Dimension: Length, Width, Height: 1670 x 200 x 200mm • Heating rod length: 1200MM LARGE STOCK AVAILABLE

Condition: refurbished (used), 800 KW URBAS system Platform 2x2m Ash scraper for grate ash Screw for multicyclone Boiler (heat exchanger + refractory lining renewed) Trough chain conveyor Slide-in unit ( new ) Burn-back protection Secondary air blower Primary air blower Flue gas blower Iodporp Dx Hofx Ab Isa Hydraulic unit with cylinder Flue gas pipes ( New ) Multicyclone ( New ) Electrical cabinet computer Complete documentation / operating instructions Additional if required: Moving floor Condensation

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Iedpjnr Ek Usfx Ab Ioa Year: 2007 Output: 1200Kw Burner: Weishaupt oil or gas burner on request

Condition: used, Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Ijdpfx Aek Aa Iaob Isa Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Ijdpfx Aswi Tdzob Ija Make: RMG Type: 67 Constr. year: 2020 diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Location: In our warehouse

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Iodpfx Ajv N H Hdsb Iea Year of manufacture: 1995. Type: UF 1200x3650. Very good condition, fully functional.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Ijdpfx Aeu Hgllob Ioa Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38L/9008, Offer Number: M38L/9008 Machinetype: pre-drawing machine Make: RMG Type: 910-2563-21 Constr. year: 2003 diameter range: 15,6 mm high-tensile: 14,1 mm capstan diameter: 900 mm Iodpfx Aowxdk Dsb Ija drawing speed: 16 m/min output: 1500 kg Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 Ijdpfx Abswxdkqj Isa diameter range: max 18 mm feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse