Used Press Safety Valve for sale (26,281)

Condition: used, 1 Color Press Heidelberg GTO46+ N+P in good Condition.   1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1989 - Serial-No. 698328 Size max. 140 x 180 / 320 x 460 mms Dampening System VARN Compac Plus Version with Numbering and Perforation unit N+P Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Prjdjylycnjpfx Abpsa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Prjdpfxjw Nhc Re Abpea Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Prjdpev Sthgjfx Abpja Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Pedpfowgd S Dox Abpora Druck stufenlos regelbar / Pressure steppless Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Pedpfx Asxl E Nfobpjra Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training Prsdpfx Aeqgcq Hebpsa

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm Pedpeu Hkfpjfx Abpora

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Prjdpfxorffm Ne Abpoa

Condition: used, Year of construction: 1999, machine/vehicle number: 990418402, Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 82 - 2 MEBaujahr / Year 1999 - Serial-No. 990418402 Arbeitsbreite / Working width max. 820mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Einlaufhöhe / Infeed high min. 400mm - max. 950mm Stream delivery with integrated pressing rollersBeschreibung / Description: Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter ASP 82-2 ME extension to four-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Podpfeih Nl Rex Abpera

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pjdpfx Ajut Tkgsbpera On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm output: 300 St./min. Psdpfekk Exex Abpera

Condition: used, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDASerial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Predpfx Absh Aw Ucepea On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Podpsh Axiqofx Abpera Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 26184, Presstation / Press station Stahl PS 46Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Prjdpfx Abjh Axlhopja Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Podpfx Ajgwv S Uobpora stroke: max. 275 mm weight: 4.500 Kg.

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Pjdpfxszc Rhvo Abpora Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Accessories: ruffler and special press ram

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s Pedpfozizybex Abpora - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: new, Pressing force: 100 t Maximum stroke: 380 mm Working width between columns: 1100 mm Cylinder diameter: 220 mm Diameter of the piston rod: 90 mm Diameter of the piston head: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Retraction speed: 9.06 mm/s Motor power: 2.2 kW Machine dimensions L x W x H: 1665 x 865 x 2140 mm Prjdpfxehauyys Abpsa Weight: 970 kg Accessories / Special features: • Adjustable cylinder • Chrome-plated, hardened piston with detachable base • Integrated pressure gauge • Pressure regulation • Two speeds and regulating valve • Adjustable work table • Joystick for operating the piston • Hand pump with dual operation for highly precise pressing operations • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Podjdf Ud Sopfx Abpera Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm Prsdpfxefn Tvhe Abpsa ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Prjdpfedf Ufdox Abpea Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm Prjdpfx Aofn Tviobpea ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, overall weight: 16,000 kg, controller model: Cybelec DNC 800, working width: 3,000 mm, bending force (max.): 160 t, distance between stands: 2,650 mm, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Pedpfx Ajzk A Ivobpsra Die shifting Tool package Side safety doors

Condition: used, Year of construction: 1986, functionality: fully functional, pressing force: 150 t, total length: 1,690 mm, total width: 1,440 mm, total height: 2,800 mm, No minimum price – guaranteed sale to the highest bidder! Psdjzk A Ucopfx Abpera TECHNICAL DETAILS Pressing force: 150 t Oil volume: 480 l Aftertravel: 30 mm Safety distance: 180 mm MACHINE DETAILS Total power requirement: 18.5 kW Dimensions & Weight Dimensions: 1440 x 1690 x 2800 mm Machine weight: approx. 4200 kg

Condition: good (used), Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Pjdpfx Aszlahvebpsra Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder