Used Prism for sale (276)

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm Lhedow U U Svjpfx Abcsd table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on request Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: new, Year of construction: 2026, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm Lsdpfxjxaayhs Abcehd column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm Ledpexaar Dofx Abcshd column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, Year of construction: 2026, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder Lhodoxaakgspfx Abcsd - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, Year of construction: 2026, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Lhodpfx Abjxabnaecjd Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - SPECIAL SET for SIEGMUND 28er clamping tables - ORIGINAL SIEGMUND accessories (!!) included in the scope of delivery : - 1x 280910 .. 28 mm - mobile tool trolley incl. rollers - 8x 280410.N .. Universal stop 150 L nitrided - 4x 280420.N ... Universal stop 225 L nitrided - 2x 280162.N ... Stop and clamping bracket 500 G left nitrided - 1x 280166.N ... Stop and clamping bracket 750 G left nitrided - 1x 280167.N ... Stop and clamping bracket 750 G right nitrided - 1x 280164.N ... Stop and clamping bracket 500 G left nitrided - 1x 280165.N ... Stop and clamping bracket 500 G right nitrided - 4x 280152.N ... Stop and clamping bracket 300 G left nitrided - 16x 280610.N ... Professional screw clamp, nitrided - 6x 280630.N ... Professional screw clamp 45°/90° nitrided - 8x 280651.1.N .. Prism Ø 60-135° nitrided - 8x 280110.N .. Stop and clamping angle 175 L nitrided Ledpfsxabvdsx Abcohd - 30x 280511 .. Quick-action clamping bolt, double without groove, burnished - 4x 280430.N .. Universal stop 500 S nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, - further accessories such as: Probe CleanBasic, Probe Anti-Stick and torch holder

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm Lhsdpfew U U N Uex Abcsd - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle Lhjdpfxjxabffj Abced + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite Ledpfx Abexaapcscehd column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: new, cutting diameter 120 mm capacity 90 degrees: flat 120 x 102 mm capacity 90 degrees: square 112 x 112 mm capacity 45 degrees: flat 78 x 78 mm capacity 45 degrees: round 80.0 mm capacity 60 degrees: flat 50 x 43 mm capacity 60 degrees: round 50.0 mm Lhodpfx Aboxaawtscsd cutting speed 35 - 80 m/min saw band length 1440 x 13.0 x 0.65 mm voltage 230 V engine output 1300 Watt weight 18.0 kg range L-W-H 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - "Constant Speed" setting with current limitation - Stable, robust frame made of sectional steel - Bracket locking device for easy transport Accessories included: - Adjustable length stop 500 mm - Detailed operating instructions + maintenance manual - Circuit diagrams and exploded drawings - Saw blade for pipes and profiles

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Lsdpfx Asxabzyobcehd Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Lodpfx Abex Ut Iqjcjhd Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification.

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Ljdpfxox Ut H To Abcehd Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. The control has a memory with 5 values for faster and more precise work on the machine. The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Lhsdpfx Ajx Utyyobcsd Shaft diameter: 50mm Shaft length: 600mm The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: used, Year of construction: 1982, Lathe Schaerer, model UD632 Specifications: - Working height above floor: 1120 mm - Centre height above flat bed: 320 mm - Swing over bed: 660 mm - Swing over cross slide (short): 450 mm - Swing over cross slide (long): 420 mm - Swing in gap: 710 mm - Drive power: 15 / 22 kW - Spindle torque: 3000 Nm - Max. workpiece weight between centres without steadies: 1500 kg - Max. workpiece weight between centres with one steady rest: 2200 kg - Bed width: 460 mm Main spindle: - Spindle head with centring cone: 55022, size 8 - Front spindle bearing diameter: 120 mm - Through spindle bore: 72 mm - In front, taper 1:20: 80 mm - Internal taper: Morse 5 - Speeds: 1.8 – 2240 rpm Carriage feeds (number): 3x32 - Longitudinal feed A, 1:1: 0.07 – 1.12 mm/rev - Longitudinal feed B, 4:1: 0.31 – 4.5 mm/rev Ledpfx Abjgbd E Decshd - Longitudinal feed C, 24:1: 1.8 – 28 mm/rev - Cross feed A, 1:1: 0.035 – 0.56 mm/rev - Cross feed B, 4:1: 0.16 – 2.24 mm/rev - Cross feed C, 24:1: 0.9 – 14 mm/rev - Rapid traverse longitudinal: 5000 mm/min - Rapid traverse cross: 2500 mm/min Leadscrew: - Pitch: 12 mm - Diameter: 50 mm Thread cutting: - Metric threads (number): 3x32 - Metric thread range A: 1 – 12 mm - Range B: 3.25 – 48 mm - Range C: 21 – 288 mm - Inch threads range A: 24 – 15/8 TPI - Range B: 6 – TPI - Range C: 1 – 1/12 TPI - Module threads A: 0.5 – 6 Mod - B: 2 – 24 Mod - C: 10.5 – 144 Mod - DP threads A: 48 – 3 DP - B: 12 – 1 DP - C: 1 – DP Cross slide: - Width: 310 mm - Cross slide short: 465 mm - Cross slide long: 1000 mm Top slide travel (manual): 150 mm Top slide travel (automatic): 180 mm Tailstock: - Quill diameter: 90 mm - Quill travel: 200 mm Weight (standard version): 3460 kg Year of manufacture: 1982 Special features: - Machine is in very clean condition - Double prism under-bed for high precision - Digital read-out HEIDENHAIN, model ND 780 - Infinitely variable spindle speed! - 3-jaw chuck FORKARDT - Automatic lubrication system - Automatic tool post - Rapid traverse on all three axes - Chip guard - Machine lighting Delivery conditions: - Delivery time: ex-stock, subject to prior sale - Delivery: ex Baarle-Nassau - Payment: prior to collection - Prices: net, excl. VAT Disclaimer: Machinehandel De Leeuw BV cannot be held liable for any discrepancies in the technical data in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automated storage systems like the Kardex Shuttle XP, XPlus and NT systems. Warehouse: Oordeelsestraat 7b, NL-5111 PA Mail address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Phone: Mobile Antoine: VAT no.: NL800103026B01 CoC Tilburg: 18034279

Condition: new, Year of construction: 2026, TECHNICAL DATA Lsdpei Amnpjfx Abcjhd Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH Lhodpfox Urucox Abcod UNBEATABLE PRICE

Condition: new, workpiece weight (max.): 30 kg, rotor diameter: 700 mm, The BALANCING MACHINE 9A713 is a universal horizontal-axis balancing machine designed for light rotors up to 30 kg in various configurations. This series incorporates innovative technical solutions, ensuring that balancing is straightforward and accessible. With high performance and functionality, the 9A713 is popular in manufacturing across multiple industries. Originally designed for small series and individual production, its versatility and productivity have also made it a favorite in various repair shops. HIGHLIGHTS • High balancing accuracy 0,4 gmm/kg = 0,4 µm • Advanced Rollers: Specially designed rollers with advanced grinding technology mounted on precision bearings. Lhedetu Ukaspfx Abcod • Bearing Design Options: Hard-bearing design suitable for small rotors, with optional soft bearing support available. • Belt Drive System: High degree of belt tensioning repeatability with a micro-tuning function for precise belt tension adjustment. • Quick Changeovers: Easy access to support rollers for quick rotor reinstallation and rapid replacement of roller units with prism units, significantly reducing changeover time. • Versatile Rotor Balancing: Capable of balancing rotors with small distances between bearing journals, limited only by the drive belt width. • Variable Speed Control: Frequency inverter asynchronous electric drive with a powerful motor for infinitely variable speed control and smooth acceleration/deceleration. • Height-Adjustable Supports: Adjustable supports to accommodate different bearing journal diameters, aiding in centering the workpiece. • Easy Installation: Requires no special foundation and can be installed on a standard concrete floor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 0.3 - 30 kg (60 kg) Maximum rotor diameter (above the bedding) 700 mm Distance between centres of rotor supports 10 – 700 mm Support type Rollers + Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 2000 rpm Electric motor power 0.75 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, workpiece weight (max.): 3 kg, rotor diameter: 400 mm, rotor length: 300 mm, High-Precision Rotor Balancing for Small Batch Production. Lodpfou Urwgex Abcshd The 9A710 balancing machine excels at balancing various rotor designs up to 3 kg. Its exceptional accuracy and high sensitivity allow you to detect and correct even the slightest imbalances. This makes it ideal for single-piece and small-batch production, ensuring smooth operation of your rotors. Key benefits: • High precision: Detects minute imbalances for optimal performance.   • Wide application: Handles diverse rotor designs within the weight limit.   • Simple & reliable: User-friendly design ensures long-term operation. • Increased productivity: Streamlines balancing processes in small-scale settings. Originally designed for small-batch production, the 9A710's versatility makes it a valuable asset in repair shops as well. This machine is perfect for balancing: • Small motors & generators • Shafts for various mechanisms • Impeller fans & pumps • Precision machine tool components • Rotating drive elements ! Upgrade your balancing capabilities and achieve exceptional results with the 9A710. SPECIFICATIONS Weight range of balanced rotors 0.03 - 3 (5) kg Maximum rotor diameter (above the bedding) 400 mm Distance between centres of rotor supports 4 – 300 mm Support type Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.1 g*mm/kg Rotor speed range 600 – 3000 rpm Electric motor power 0.09 kW Parameters of the supply network 220V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 125 mm -Clamping depth: max. 35 mm -with prism -Dimensions: 300/125/H70 mm Lhodpfx Abob A Npvecjd -Weight: 10 kg

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Neck: - Gooseneck in SNT design to optimize load platform length, approx. length 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical kingpin load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines run protected inside the extendable beams and adjust automatically to the respective bed length - 5 pairs of fold-out lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for fitting bolted RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate surface, and continuous prism-shaped digger recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of laying lashing rings in the recess LC 16,000 daN - 1 pair of laying lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE system, all axles forced-steered hydro-mechanically Ljdpfxsxbmn Uj Abcshd - Hose break valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Axles finished with 2 layers of 2K paint, single-color painted in FAY-Grey-34-0260 - Technical axle load: 12,000 kg per axle, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – Brand at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure automatically shot-blasted after welding with a blast wheel system - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red per RAL system 841GL Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear via cable control with push buttons, including axle tracking control (without installation in tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on the outer beams; includes 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - Rear galvanized plug-in stakes are removable

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling -Drainage channel and water pump Lhjdpoctmvzofx Abcod -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm Lhodpfx Abob A Nlfocsd -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm Ledpfxeb A Nlmo Abcohd -Length: 2550 mm -Weight: 70 kg

Condition: good (used), Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm Lhodpshqf Rnofx Abcsd -Weight: 212 kg