Used Switzerland for sale (247)

Condition: used, functionality: fully functional, Manufacturer: TORNOS Type: DECO 2000/07 Year: 1996 Machine no.: T 62136 Country: Switzerland Specifications: Max. capacity in collet: 7 mm Control: FANUC 16 T-B Hour counter, machine powered on: 24,095 hours Equipped with: Collet clamping device Bar feeder magazine Full C axis Workpiece gripper Tool holders Coolant system Operator keys, etc. Pgjdjxq D Svopfx Ab Iew

Condition: new, machine/vehicle number: e763c8c2bb3370bd2342236a4, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Steel underride guard Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir without ABS, but with mechanical ALB, then max. 60 km/h approval 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, electrics 12 volt, multi-chamber lights, without amber LED lighting at the sides, reflectors at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 7-pin 12 volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-sided tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Pedpfx Abei Rizbs Isgw with Dekra approval and expert opinion, for max. 60 km/h approval, towing vehicle LoF, (max. 40 km/h possible in Switzerland) Prepared for single-line license plate holder without contour marking / reflective strips according to ECE R 048, Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Please note! If the bridge is galvanized, it will not be painted! Note! Bridge only primed inside! Wide tires also possible for an extra charge. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive pictures!

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Pjdpfxoxq Exqj Ab Iegw

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. Pjdpfxjxp Ibxe Ab Isgw The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02/7467-70, total height: 6,000 mm, number of shelf rows: 8, shelf height: 300 mm, number of feeding trays: 18,500, Used High-Bay Storage System Type "Automated Small-Parts Warehouse" Frame height: 6 m, depth: 700 m, bay width: 1.5 m, 14 levels high, approx. 18,500 pallet spaces, bay load: ? kg, shelf load: 3x? kg, total length approx. 400 m. Pgodpfx Aoxqrbleb Isw Scope of delivery: racking system, 4 pcs. Viaspeed S2-RZF DT, 1 storage and retrieval machine (SRM / stacker crane) 18,500 small load carriers (KLT containers) 600 mm x 400 mm x 270 mm The racking system is in operation until approx. 31.3.26. Required floor space in our facility: 51 m x 18 m x 6 m (height) There are 8 racking aisles serviced by 4 shuttle trolleys. Well preserved, little used, some components never used. Already dismantled. Preference is for sale of the entire racking system. For bids on partial quantities, racking aisles of approx. 51 m must be taken. The buyer must purchase and commission the main control unit (stacker crane / SRM) from the supplier at their own expense. Please state your offer price. Sale only within Europe (EU), Türkiye, Great Britain, and Switzerland. Only the German version of this text is binding. Technical data and item list: see handout. No packaging; any warranty is excluded. If you wish to dismantle the system yourself, please inform us accordingly in your offer. We assume no liability for the accuracy of the technical data, the completeness of accessories or tooling, or for compliance with any safety or environmental requirements specified in accident prevention regulations.

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Pjdpexfmmrsfx Ab Ijgw Model F0i-F Main Drive Spindle speed range 12000 Tool taper BT 40 Number of axis 4 Additional Equipment Spindle Cooler: Included Preparation for 4th Axis: Pneumatic Clamping Line Torque Monitoring: Tool Monitoring Systems This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: Pgjdpfxju Thbxo Ab Isw The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, machine/vehicle number: b50cac2c60a813b0968994fa0, empty load weight: 5,700 kg, maximum load weight: 18,300 kg, overall weight: 24,000 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Rear spray flaps across the entire width Preparation for widening to 3,000 mm (holes in the outer frame and not in the rear slope) Low loader lashing eyes 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 5 x in the drop deck 1 x in the rear slope 12 pairs of lashing holes in the outer frame, each with 5 to. (lashing strap attachment) 5 x crank, 6 x low bed and 1 x in rear slope Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5 Fulda Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, Connecting lines extended by approx. 60 cm without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 12 volt, multi-chamber lights, without amber LED lighting at the sides, reflectors at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear Pedei Ri Agepfx Ab Isgw 1 x 7-pin 12 volt plug at the front, with connecting cable, extended by approx. 60 cm 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, illuminated and extendable to 3,000 mm, floor Front offset with steel/ checker plate covering Storage box recessed in drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 5900 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion, for max. 60 km/h registration, towing vehicle LoF, (max. 40 km/h possible in Switzerland) Prepared for two-line license plate holder without contour marking / reflective strips according to ECE R 048, Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: type plate available, AE 100 liter reactor vessel, enameled steel, manufacturer Estrella AG, Switzerland. Year of construction 1995, total capacity 135 liters, double jacket with 40 liter capacity. Perm. operating pressure vessel -1/+6 bar, perm. operating pressure double jacket -1/+6 bar. Perm. operating temperature -25/+200°C, enamel color blue, impeller agitator, mechanical seal. Hand hole, sight glass lamp, 400 V EX drive, bottom drain valve, baffle with PT 100 temperature probe. For questions and further information please contact us, we will be happy to answer your questions, Cycron GmbH Psdpsu Ibgtsfx Ab Iogw

Condition: excellent (used), different measuring clamps from 100 - 250 mm : 100 - 125 mm make Steinmeyer 125 - 150 mm make Mitutoyo 150 - 175 mm make Steinmeyer 175 . 200 mm Make Mitutoyo 200 - 225 mm make Pierre Roch Switzerland 225 - 250 mm make Mitutoyo all measuring clamps are in cassettes Pjdpfjgz Amksx Ab Iogw total. Weight 8 kg

Condition: good (used), Year of construction: 2010, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: API582146, total length: 2,050 mm, total width: 960 mm, total height: 1,800 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 435 m³/h, operating pressure: 13 bar, Equipment: type plate available, Atlas Copco GA 37 VSD FF – used premium screw compressor Variable speed screw compressor, air-cooled, oil-injected, Full-Feature model including integrated refrigerant dryer and heat recovery system Used unit from year 2010, fully functional, approx. 15,000 operating hours, sold as is with no warranty, ex location Balgach / Switzerland Delivery capacity: 6000 l/min. Pjdpfxexpibaj Ab Isgw Annual servicing performed.

Condition: used, mileage: 21,600 km, power: 375 kW (509.86 HP), first registration: 10/2023, overall weight: 26,000 kg, fuel type: diesel, color: grey, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB Actros 2651 STX EXCLUSIVE Horsetruck / Motorhome with STX Trailer for 4 Horses with Living Quarters Pgsdew Nuutspfx Ab Iew ABSOLUTE FULL EQUIPMENT! Truck: €495,000 Trailer: €195,000 Motorhome registration possible for Switzerland. Truck: 3-4 horses | Trailer: 4 horses | Side and rear ramp | Double pop-out | Pop-up | Kitchen on lower level | Basement under living area | Storage compartments all around the truck | 6 kW diesel generator | 550-litre fresh water tank | 300-litre waste water tank | 8-9 sleeping berths | Living area | Large bed over the bathroom | Separate grooms’ bed | Video monitoring and temperature monitoring for the horse compartment | LG stationary air conditioning | Auxiliary heater | 2 TVs/Satellite | Hardwood interior | Bathroom | Shower | WC | Air conditioning | Kitchen | Leather seating group | Microwave | Refrigerator and freezer | Dishwasher | External saddle locker | XXL awning | Winch | Cruise control | Alloy wheels | Navigation system | Air suspension | Steerable rear axle | Towbar | and much more. Errors/input mistakes and prior sale subject to change. * NET SALE POSSIBLE. * Top leasing offers * Net price in Germany plus 19% VAT. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes and models in the field of horse trucks and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Pgsdpfxsxcqz Is Ab Iow Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: new, Year of construction: 2024, Laser Engraving Machine with 60-Watt Laser Power New demonstration unit - 60 Watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - fully installed and calibrated - engraving software in German - very easy to operate - switch on and start immediately - Fiber laser source with 60 watts for high-contrast and fast marking with extremely high resolution (see photos) - Deep engraving up to 4mm possible (even in hardened steel) - Wobble function, e.g. for cleaning metal components - Suitable for engraving on many metals (stainless steel, brass, aluminum, etc.) and numerous plastics - Heavy industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600 mm (LxWxH) - Clamping table with threaded mounting holes in a 50mm grid - LED workspace lighting - 50mm port for fume extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - Incl. foot switch for starting the engraving process Pedjfkgq Nopfx Ab Isgw - Leasing or hire purchase possible through our finance partner Sale to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Podpeu U Afujfx Ab Ijgw Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: used, Kündig Duplex 1350 KdS-E Brilliant + Lacquer Podpfjw Elvzex Ab Isgw Quality product from Switzerland Constant table machine / automatic Head adjustment Wide-belt calibration and fine grinding machine 1st unit: Combination unit with 90 Shore contact roller and sanding pad unit with electronically controlled segmented sanding pad Contact roller level continuously adjustable according to the grit scale Swivel sanding unit for diagonal sanding Infinitely variable sanding belt speed 3 - 18 m/sec Oscillating belt sanding 2nd unit: Sanding pad unit with electronically controlled segmented sanding pad Belt drive motor power 15 kW Working width 1350 mm Max. workpiece thickness 160 mm Feed speed continuously adjustable 3 - 15 m/min Sturdy vacuum table with varnish carpet Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed trigger (for long workpieces) PLC control with LCD screen for automation and management of all work programs Infeed and outfeed tables with roller support Machine is WORKSHOP REFURBISHED in TOP condition CONDITION from Lieboch warehouse

Year of construction: 2002, condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Pedpfxsd Nd T Ue Ab Ijgw BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Condition: new, new, never used in original packaging Pgjdpfx Ajv Dhc Nsb Isw Quantity: 200 pieces price per piece. Origin: Switzerland Consists of: 1. Propeller hub with 3 pre-assembled, adjustable aluminum blades 2. Precision plastic adjustment wheel 3. High-strength stainless steel mounting nut for variable pitch propeller 4. Locking plate 5. Floating key for stepless wing pitch adjustment 6. Key for snacks for changing flights 7. Operating instructions The REVOMASTER S 110 propeller is characterized by high efficiency and low weight, which ensures better performance and fuel savings. Thanks to the use of carbon composite, it is corrosion-resistant and has a long service life. It is also available in various mounting configurations, which allows it to be adapted to different types of engines.

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Kw: 7.5 Pgodsdt Rthjpfx Ab Ijw A: 380

Condition: excellent (used), MEDIUM CUT FOR MÜLLER MARTINI 305 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pjdpfx Abedyinds Iegw

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 081058130, (slitter / cutter / creaser) Power : A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm* (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm Psdeffx Skepfx Ab Iegw

Year of construction: 1995, condition: excellent (used), machine/vehicle number: 458/08 (C.2.144.1301/02), Max. Format: B1 Pgedpfjfh Dp Tox Ab Ijw Voltage : 100-240V // 300-330VA // 50/60Hz Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 1395, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pgodpfxodtcchs Ab Iew

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 3463 / 18 (91.144.1301/021), Max. Format: B1 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pgedpfx Abjfh Dp Ro Iew

Condition: excellent (used), machine/vehicle number: 91-1101, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pedpfx Aednr E Aob Iegw