Used Tilting Spindle Moulder for sale (15,492)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: KK052469, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 Ksdoiinm Hopfx Adwoll height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 591, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm suction nozzle 120 mm Handwheel height adjustment Kledpfx Aoiw D Uhjdwol fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm no brake

Condition: reconditioned (used), Year of construction: 1995, Motor power: 8.6 kW Voltage: 400 V 50 Hz Klodpfxsv Npqrs Adwol Spindle: 30 + 40 mm Sliding table: yes Circular milling: yes Brake and emergency stop Speeds: 3000, 4000, 6000, 8000, 5000, 10000 rpm

Condition: reconditioned (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 662310, Connected load 380V 3kW + 4kW Kjdpfx Adoiw D N Djwoll right/left rotation Star-delta switch 2800/4500/6000 rpm and 5600/9000/12000 rpm

Condition: reconditioned (used), functionality: fully functional, Power consumption 380V 4,5kW table size LxW 1050 x 950 mm suction Ø 120 mm spindle-Ø 30 mm Kjdpfxeiw D Ups Adwsll right/left rotation electrical change-over for two speeds 3 speeds fence jaws individually adjustable

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete Kodji Atftjpfx Adwjll control panel on top cable w. plug 16 A 130 mm suction diameter table 1000 mm wide, 800 mm deep motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel infeed jaws individually adjustable via handwheel

Condition: reconditioned (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 7867/162, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin Klsdpfxsh Ux Rwe Adwsl right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 2003, functionality: fully functional, Work table dimensions 1,200 x 730 mm Spindle tilt -10 + 45 Max. clamping height on spindle 140 mm Max. tool diameter tool diameter 250 mm Max. diameter for tool lowering under table 300 x 130 mm Spindle speed 3300/4400/5600/7500/10000 rpm. Extraction nozzle on fence and rear stand, diam. 120 mm Pneumatic working pressure, min. 6 bar Kedpfjvurhdox Adwoll Main engine 7.5 HP, 5.5 kW For further information about technical data. Contact us

Condition: excellent (used), Year of construction: 1981, - Spindle diameter 30 mm - Tool diameter max. 200 mm - Spindle speed 4500/9000 rpm. Kodpfx Adjvvh Atowsll

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0803024, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Kedpfx Adsv Tzw Ejwoll Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Fixed shaft Kodpfxjw Rftie Adwsll Extended tables both left and right Aigner integral fence Maggi Steff 2034 Power feed unit

Condition: good (used), Year of construction: 1991, Scheppach spindle moulder hf 3000 Year of manufacture 1991 Table size 615 x 450 mm Klodpfxjwhiume Adwol Table height 870 mm Finely adjustable router stop Spindle diameter 30 mm Max. tool diameter 200 mm Speeds 3,000 / 6,000 / 9,000 rpm Motor 400 volts / 3.0 kW Right/left rotation Extraction nozzle 100 mm Bracket for sliding carriage Chassis Various accessories

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Kedpoxhfycofx Adwoll Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm Kedpfx Aotty Nkedwell -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: good (used), Spindle / Spindle 3.5 - 16 - 10 kVA Kedpsp I T Rqefx Adwsll 2750 - 14660 - 23660 rpm Inspection is possible by prior appointment at my warehouse!

Condition: used, Moulder IDC000075 - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation Kodjtwy T Repfx Adwell

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Kledpfx Asumn Dujdwsl

Condition: excellent (used), Merand Baguette Machine in good working condition Klsdpfxskzh Eho Adwsl

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Kljdpfx Adewt Tnhewel Retactable belt. Belt dimensions 700mm W x 29mm L

Year of construction: 2022, condition: used, functionality: fully functional, FPRO EX-Automatic Link Coner-72 Spindle 4 units available for this model Kljdpfxsya Ed To Adwol

Condition: used, Year of construction: 2022, functionality: fully functional, 4 units available for this model Kledpjya D Iqsfx Adwjl

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center, Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for live tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Corner speed: 3,200 rpm Tool carrier unit for live tools: 12 x BMT75 Rotary workpiece transport system, O-version Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band For workpiece diameter: 150 - 400 mm Blow-off for workpiece and clamping device (Pick-Up) Coolant supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) A cooling unit (with dual-circuit technology) regulates the machine's thermal management. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filtration fineness 100 μm, with electric and mechanical contamination indicator Chip conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction: extraction capacity approx. 800 m³/h Kedpfx Aevq Iwyodwoll Wash-down gun Workpiece measurement with probe Probe blow-off Tool monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal tower Axial drilling-milling head – BMT75 CC 5x angular drilling-milling head 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Gr.150 - with 1 media passage Max. clamping force 10,850 daN at 70 bar Coolant supply through spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change Max. = 2,200 rpm (reference speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Accessories for KNCS-N 500-155 Rinse nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 finish turning tool external 1x 8.BMT25VL8IKX50 roughing turning tool external 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping holder 1x 40.75V5KRVL8IKD face milling cutter 50mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill diameter 20mm 1x 42.V522L08Ik drill diameter 22mm 1x 27.V514WNL31 drill diameter 14mm Software package Operating instructions / maintenance manual 21126ä

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Kledpov Ai N Usfx Adwol Storage location: Nattheim

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Kjdpfxjwhqprj Adwell

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Klsdpfx Aewhqpljdwol