Used Vertical Vacuum Furnace for sale (11,177)

Condition: used, Year of construction: 2001, rpm 18.000 - 24.000 X axe 4 000 mm Y axe 1 400 mm Z axe 800 mm Iaedpsx Uqr Tefx Adwol Machine dimensions 6400 mm x 2600 mm x 3800 mm

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, workpiece weight (max.): 12,000 kg, travel distance X-axis: 1,900 mm, travel distance Z-axis: 1,400 mm, spindle motor power: 1,00,000 W, spindle speed (min.): 60 rpm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, turning diameter over cross slide: 2,200 mm, turning diameter: 2,200 mm, total height: 2,000 mm, feed rate X-axis: 8 m/min, Equipment: rotational speed infinitely variable, Machine Fresh from production Iaedpfx Adjvc Ei Rswsl Test and quaility controlled next 6 weeks Manufacturing year 2025 WAIT FOR OFFERS

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 18.1 kW Movement X-Axis Movement 650 mm Iaedsx S Skrjpfx Adwol Z-Axis Movement 375 mm Y-Axis Movement 50 mm This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 Iaodpfjx Tti Sjx Adwol For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Taper : BT40 Iasdpjxgk Nmjfx Adwol ATC 30 Immediate Delivery

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 36000L/h - 14000L/h. - Lifting height max: -39-19m - Motor power: 4 kW - Rotational speed: 2900 rpm Iaodpfevilv Rjx Adwel

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS Isdpjx U E Szefx Adwjal MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Stainless steel nonpressure jacket capacity 0,8 litre. Has bottom S-blade type of agitator driven via el. motor 1.8 kW, 1400 rpm, 50 Hz, 400 V, adjustable rpms from 300 - 3000 rpm. The vessel has top entry manual teflon wall scrapper. Integrated switchboard with local control panel. Also includes vacuum pump Busch model RB 0006 C IZ0 and electrical heater Thermo Haake model SC 100 with circulation pump for heating jacket. Specifications: Iaedpex Tic Usfx Adwjl Power: 1.8 kW

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 17000 kg Table Table load 2270 kg Main Drive Number of axis 3 Iodpfxox Stlws Adweal Spindle Speed 12000 RPM Spindle motor power 18 kW Tool taper SK 40 Movement X-Axis Movement 2135 mm Z-Axis Movement 762 mm Y-Axis Movement 865 mm Tools Max weight 7 kg This 3-axis Hurco VMX84i was manufactured in 2015. It features a WinMax control system, a table size of 2185 × 865 mm, and a maximum table load of 2270 kg. The machine offers a travel range of 2135/865/762 mm and a spindle speed up to 12000 RPM. It includes a 40-position automatic tool changer and through-spindle coolant. If you are looking to get high-quality milling capabilities, consider the Hurco VMX84i machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Iedpfxsx D A Ucs Adweal Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Iedpfox R Thvex Adwjal Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Iaedpfxjw I Hzpj Adwol Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.

Condition: good (used), mileage: 2,25,500 km, power: 286 kW (388.85 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, loading space volume: 16 m³, Year of construction: 2008, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = Volvo FM380, 6x2*4, 16 m³ sludge and high-pressure truck with crane, first registration: 2008 Further information: Engine: 380 HP Transmission: I-Shift Suspension: leaf spring Mileage: 225,500 km Wheelbase: 4,300 mm Emissions standard: Euro 5 First registration: 23.01.2008 Year of manufacture: 2007 Electric windows and mirrors Air conditioning Reversing camera Webasto cab heater and pump compartment heating, engine pre-heating No warning messages! Last service at 222,500 km (08.10.2025) Last technical inspection at 218,700 km (02.04.2025) Tachograph recently inspected: 08.10.2025 The truck is in good and fully operational condition, with no active faults/warnings present. Superstructure: Korp&Son 16 m³ with 2 remote controls, sludge suction and high-pressure flushing unit with stainless steel floor and tipping device. Compartment (1): 8 m³ for high-pressure flushing water. Compartment (2): 8 m³ for sludge. Water pump: URACA with 1-inch high-pressure hose and ½-inch high-pressure hose. Vacuum pump: Moro model PM200, 930 m³/h, pressure 0.9 bar, vacuum -0.9 bar; all in flawless and fully operational condition! All components serviced in October 2025. Front tyre tread depth: 70% Rear tyre tread depth: 70% Price: €, Stockholm, Sweden = Further Information = Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 70%; Right tyre tread: 70%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Double tyres; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyre size: 385/65R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Left tread: 70%; Right tread: 70%; Suspension: air suspension Iodpfjx Tnrzsx Adwsal Crane: Year of manufacture 2007 APK (General Technical Inspection): valid until 03.2026 Technical condition: good Visual condition: good

Condition: used, Used 3C vacuum dissolver mixer 120 litre double jacket Material : Stainless steel Motor : 3 kw - Hp 4- Rpm 1420 - 3x 220/380 volts Electrical heating 3x 3 kw Useful capacity : 120 litre Agitator : dissolver Ø 120 mm Conical vessel Ø 600 x 200 mm - Height: 750 mm Equipped with: Iajdpfjx Ryvtox Adwjl - 1 vacuum pump 0.37 kw - 1 double-jacket fluid circulation pump 0.26 kw - 1 circulation pump for the mechanical seal 0.5 kw

Condition: ready for operation (used), Year of construction: 2013, Movement Y-Axis Movement 510 mm Z-Axis Movement 580 mm This 5-axis Mazak Variaxis i-600 was manufactured in 2013. It features a Siemens 840D control system, a table size of 600mm, and a spindle speed of 18000 RPM with a power of 35 kW. The machine offers a tool capacity of 40 and has spindle run hours of 1900. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis i-600 machine we have for sale. Contact us for more information about this machine. Iodpfxox R E Iho Adwoal Application Types Milling

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram Iaedpfx Adjyagiqswjl 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: excellent (used), functionality: fully functional, Used annealing furnace Manufacturer: Rhode Iasdpfx Adox Tbgrewjl Type: protective gas furnace KL 70/65/135 Year of manufacture: 1992

Condition: excellent (used), Electric Hydraulic Pump - Power supply 380V - Capacity 7 liters of oil. Iasdjvzb Hvepfx Adwsl - 25 Bar - Very good condition.

Condition: new, Machine in stock and immediately available Cutting width: 1010 mm cutting height: 340 mm working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Saw band length: 4540 mm Saw band width: 3 - 16 mm Tilting and inclining table in 4 directions: 15°. motor power: 1,5 kW weight, approx.: 800 kg Equipment: - Saw band - Infinitely variable cutting speed - Band welding device - Saw band in adjustable precision guides - Working table inclinable to all sides (not applicable for machines with table feed) - Band shear - Grinding unit - Chip brush Iedoilk Rdepfx Adwoal - Eyebolt for moving the machine - Machine light - LED speed indicator - blow out device - CE

Condition: used, Used vertical cosmetic reactor/process vessel by Ekato (DE) model SRA 2500. Tank has total volume 3674 l and working volume from 650 l up to 2500 l. Tank is designed for work on pressure from -1 up to 3 bar, working temperature up to 151 C. Test pressure on tank up to 4.69 bar. Tank is designed in AISI 316L. Tank is layered with stainless steel (AISI 304) heating jacket, volume 190 l. Jacket is designed for work on pressure in range from 0 to 4 bar, working temperature up to 151 C. Test pressure on jacket up to 7.81 bar. Top of the reactor is bolted and has central mounted frame/paravisc type agitator with wall scrappers, driven via reducer and el motor 37 kW, 1465 rpm, 400-690 V, 50 Hz. Working rotation up to 35 rpm. Reactor has central bottom outlet with discharge outlet. There are also included 4 stainless steel legs and tension sensors. Includes technical documentation. Last time used in cosmetic industry. Specifications: Capacity: 2,500 L Isdpex Ryvmsfx Adweal Type of stainless: 316L Internal Pressure: 3 bar Internal Temperature: 151°C Jacket Pressure: 4 bar Type Of Heads: Bolted Legs/Lugs: 4 legs

Condition: excellent (used), Stroke: 320mm Iajdex Tpz Depfx Adwol Table dimensions: 630mm

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 8000L/h - 2400L/h. Isdovilhajpfx Adweal - Lifting height max: -76.5m - 23m - Motor power: 1.5 kW - Rotational speed: 2900 rpm We can help arrange a cost-effective shipping company or courier for you.

Condition: used, Year of construction: 2007, Operating hours: 7,669 h Technical Specifications: Travel X/Y/Z: 500 / 400 / 500 mm Distance column-spindle: 400 mm Distance spindle nose-table: 102 - 610 mm Distance floor-table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm, double-supported Rapid traverse: 25.4 m/min Max. feed rate in X/Y/Z: 20 m/min Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool stations: 21 Max. tool diameter: 76 mm (up to 114 mm with free adjacent stations) Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC Control: - Standard CNC controller - User-friendly graphical display - Easy operation, programming, and diagnostic capabilities Steinmeyer ETA and double-supported ball screws: - Increased rigidity - Minimal friction Iajdpfx Aew D Dgisdwsl Cast iron base with robust box guideways: - Flame-hardened flat guideways - Wide contact surface on guide rails - High vibration damping

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included. Specifications: Power: 45 kW Style Blades: butterfly / tri-foil agitator Iajdpfxox Ryu Ns Adwel

Condition: used, Year of construction: 2007, Operating hours: 6,796 h Technical data: Travel X/Y/Z: 500 / 400 / 500 mm Distance column-spindle: 400 mm Distance spindle nose-table: 102 - 610 mm Distance floor-table: 787 mm Table size: 990 x 400 mm Ballscrew diameter: 32 mm (double-supported) Rapid traverse: 25.4 m/min Max. feed in X/Y/Z: 20 m/min Iaodew Du Eijpfx Adwol Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool positions: 21 Max. tool diameter: 76 mm With free adjacent positions: 114 mm Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC control: - Standard CNC control - User-friendly graphical display - Simple operation, programming, and diagnostic features Steinmeyer ETA and double-supported ballscrews: - Increased rigidity - Minimal friction Cast iron base with robust flat guides: - Flame-hardened flat guides - Wide support on guideways - High vibration damping Note: The tool changer on this machine is defective (no longer changes tools).