Used Wire Drawing for sale (4,824)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Ljdjzncqlspfx Akmoru Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: used, Year of construction: 1971, Coiler/straightener unit manufactured by SCHLEICHER, type RM-S 300 / H 2. Press force approximately --- tons. Year of manufacture 1971. Structured summary – a full technical translation will follow if required for this lot. Ljdpfozyncwex Akmjru

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. FANUC ROTARY TABLE. CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Maximum arm length: 1,249 mm. Lsdpfxoz Hw Hcj Akmoru

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Lodpfjzlc Tbjx Akmeru

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Ljdpfxjz Hzz Ds Akmsru

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Lrodozub Nmepfx Akmou Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP Ljdpfx Akoz Et Rujmjru - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF AgieCharmilles CUT 1000 Lrsdpfxjz I Ni Ss Akmju Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.02 mm to 0.20 mm (including optional KIT F20) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, overhauled, and thoroughly tested by our specialists. We will gladly commission the machine at your facility and provide training on the control system and machine operation.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Lsdpfx Akoz Ar Agemjru Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Ledpoz Imcvsfx Akmjru Bend-back clearance: max. 1.000 mm Weight: 4.000 Kg. complete with an motorized wire decoiler WAFIOS AHL 41

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW Lrodpfx Aksu Nfinemou weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Ljdpfjyhb D Ejx Akmsru

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe Lrjdpfx Asx Ea E Iskmeu

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Lrsdjzuufbjpfx Akmju Year: 2020 Operating hours: 4,883 hrs Battery: 48 V / 620 Ah Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X 650 Y 400 Z 420 U/V +/- 101mm, Table 901 x 660mm, max load on table 1,200kg. Lodpjzzmkiefx Akmoru

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg Ledszy Nlajpfx Akmoru ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Year of construction: 2016, condition: used, overall weight: 4,200 kg, total length: 2,900 mm, total width: 3,260 mm, total height: 2,200 mm, workpiece weight (max.): 3,000 kg, FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Max. Wire Spool Weight: 16 kg Travel X-axis: 800 - mm Travel U-axis: 200 - mm Dimensions (LxWxH) approx.: 2900 x 3260 x 2200 mm Component weight max.: 3,000 kg Control: FANUC Series 31i-W Model B Lsdpfez N Nuxox Akmjru Travel Y-axis: 600 - mm Travel V-axis: 200 - mm Weight approx.: 4,200 kg Travel Z-axis: 310 - mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2020, condition: like new (used), functionality: fully functional, STC-Ref: G-791-0225 Tosingraf-Megastar, Year: 2020 equipped: - Wire O binding unit - binding system 3:1 + 2:1 - Foot release lever automatic, electrical - working width max. 42 cms (A3) Ljdps Abbh Tsfx Akmeru - die cutting thickness 35 Bl/Sh (80g/m²) --> available: 11/2026

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Ledpfezyl Anex Akmjru Table area: 3000 x 2000 mm Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Lsdpfxowi Tk Io Akmeru Type: N61 Constr. year: 1986 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Europe

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 370 mm Travel distance Y :270 mm Travel distance Z: 255 mm max. workpiece size X: 700 mm max. workpiece size Y: 600 mm max. workpiece size Z: 250 mm max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 60 generator: 13 Ampere submerged cooling unit FANUC Series 31i-WA control Automatic wire threading Lodpfxjz Eqk Sj Akmjru Cutting in water bath Cooling unit Filtration system

Condition: used, Year of construction: 1966, Press force: 200 t Stroke: 600 mm Ljdszyniwspfx Akmeru Frame width: 1100 mm Shut height (stroke up): 1100 mm Table area: 1000 x 1000 mm Cushion force in table: 63 t Cushion stroke in table: 250 mm Cushion area in table: 800 x 750 mm Table height above floor: 800 mm Ram area: 1000 x 1000 mm

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Make: WAFIOS Type: S75 Constr. year: 1970 wire diameter: 1,8-3,1 mm Ljdpfew Nhwusx Akmoru nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 Lsdpfx Akewi S R Tomoru diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Ledjwi Ubnopfx Akmeru Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: 1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse