Used machining centers (vertical) X-axis travel 1700mm for sale (165)

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns Hfedpexa Hl Djfx Agwed - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Hfodpfxjwd N D Tj Agwod Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: ready for operation (used), Year of construction: 2008, operating hours: 687 h, functionality: fully functional, machine/vehicle number: A.1002669.01, travel distance X-axis: 1,800 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN iTNC 530 CNC, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 56, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 1,800 mm Y-axis travel: 840 mm Z-axis travel: 800 mm Table Table length: 2,430 mm Table width: 815 mm Spindle Spindle speed: max. 6,000 rpm Spindle mount: SK 40 Tool holder: 40 mm Tool magazine Number of tool positions: 56 Tool holders included: 30 Control Control model: HEIDENHAIN iTNC 530 CNC MACHINE DETAILS Overall length: 10,700 mm Overall width: 3,300 mm Overall height: 3,900 mm Weight: 15 t Connected load: 60 kVA Control power-on time: 27,210 h Machine operating time: 687 h Spindle run: 304 h EQUIPMENT - Machine vices not included - Mounted machine tool not included Hfodpfx Aewu Ecyegwjd Transportation on trucks up to 3,000 mm wide possible

Condition: excellent (used), Year of construction: 2005, operating hours: 71,034 h, functionality: fully functional, High-quality 5-axis machining center CHIRON MILL 2000 immediately available. Including rotary table. The machine has a particularly demanding maintenance history and operated in a two-shift system. X / Y / Z travel: 2,000 / 500 / 550 mm Max. pendulum operation: 2 × 750 mm Rapid traverse: 40 m/min Feed force X/Y: 5,000 N Feed force Z: 10,000 N Working area with NC-swivel head B-axis ±100° Resolution: 0.001° Repeatability: ±10'' Drive torque: 280 Nm Clamping holding torque: 1,400 Nm Travel X: 2,000 mm Travel Y: 480 mm Travel Z vertical/horizontal: 630 / 715 mm Distance spindle taper – swivel axis: 185 mm Distance spindle taper – table surface: 90 mm Distance spindle axis – table surface: 190 mm Distance reference point – table center: 230 mm Distance table center – end of travel: 250 mm Spindle Tool holder: HSK 63 Power: 22 kW Speed range: 20–12,000 rpm Max. torque: 140 Nm Front spindle bearing Ø: 70 mm Tool clamping force: 6,500 N Projection spindle to cover: 220–720 mm Distance spindle taper – table surface: 90–640 mm Tool system Tool stations: 20 (option 40) Max. tool Ø: 75 mm Max. tool Ø with free adjacent positions: 125 mm Max. tool length: 280 mm Max. tool weight: 8 kg Tool change time: 1.5 s Chip-to-chip time: 5 s Machining capacity Drilling capacity in ST60 (carbide): 42 mm Tapping: M30 Milling capacity in ST60: 600 cm³/min Clamping area / base table Length: 2,600 mm Width: 550 mm T-slots: 2 × 18 H12 Reference slot: 18 H8 Table height: 900 mm Supply / Dimensions Coolant tank: 200 l Total power consumption: 20 kVA Machine weight approx.: 9.5 t Compressed air connection: 6 bar Total length: 5,159 mm Cabin width: 2,495 mm Overall height: 2,500 mm Control panel width: 2,870 mm Control panel height: 1,830 mm Hsdpsxiwf Hjfx Agwjfd Option High-Speed Package Rapid traverse: 60 m/min Chip-to-chip time: approx. 4 s Tool stations: 40 Y travel: 630 mm Accessories: No tools or tool holders included. Mecatool included. Clamping devices and fixturing system only available upon separate request.

Condition: used, Year of construction: 2012, x-travel 2500 mm y-travel 620 mm z-travel 520 mm control Siemens 840 D Shop Mill table surface area 3000 x 600 mm rapid traverse 45 m/min turning speed range 18000 U/min power capacity - milling spindle 13,7 kW tool taper HSK 63 A | Hjdpsw Np A Sefx Agwofd no. of tools in the magazine 30 Stück weight of the machine ca. 9,0 t dimensions 8,3 x 4,2 x 3,6 m Vertical Machining Center traveling coloumn - chipconveyor - external handwheel - 3D- touch probe - internal coolant 80 bar - band filter system - electr. roof - 1x oil dust collector

Condition: excellent (used), Year of construction: 2002, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used IBARMIA ZV 35 L1600 vertical machining center with moving column is a medium/large sized numerically controlled vertical center with HEIDENHAIN 430 CNC, 1600 x 500 x 500 mm strokes, ISO-40 spindle (DIN 69871) 10,000 rpm, 40-position random tool changer, through-spindle coolant, carpet chip evacuator, optical scales, remote handwheel and bulkhead for pendulum machining. Hfjdpfx Aswqxnbogwed year of construction 2002, CE compliant, in excellent general condition.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: B8193, travel distance X-axis: 2,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Hfjdpfx Aowrr Ukjgwjd Travel X: 2,500 mm Travel Y: 500 mm Travel Z: 610 mm Control: Heidenhain TNC 426 Spindle speed up to: 6,000 rpm Tool changer: 30 positions Internal coolant supply: 20 bar MACHINE DETAILS Machine weight: 13,000 kg Dimensions length: 5,000 mm Dimensions width: 2,400 mm Dimensions height: 2,700 mm Connected load: 14 kW EQUIPMENT Hydraulic unit with 6 ports – electrically operated Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026375, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, workpiece weight (max.): 2,000 kg, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Rapid traverse X-Y-Z: 30 - 30 - 30 m/min Table size: 2,500 x 600 mm Maximum load capacity: 2,000 kg MACHINE DETAILS Weight: 10,500 kg Voltage: 400 V Hodpewtq Tuofx Agwsfd Frequency: 50 Hz Total connected load: 25 kVA

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: B02208348000, travel distance X-axis: 2,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 92, TECHNICAL DETAILS Travel Paths X-axis travel: 2,000 mm Y-axis travel: 610 mm Z-axis travel: 630 mm Tool Magazine Positions: 92 Performance Data Axis acceleration: up to 17 m/s² Rapid traverse: up to 75 m/min Hfsdew Nhxxepfx Agwod Spindle Specifications Torque: up to 280 Nm for heavy-duty machining Speed: up to 20,000 rpm for aluminum parts MACHINE DETAILS CNC control: Siemens 840 D EQUIPMENT Direct drives for rotary axes NC swivel head Hydraulically optimized clamping devices Note: The machine is currently not under power. An inspection under power can be arranged upon request.

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m Hsdstqmr Rspfx Agwofd CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Hfjdswyblzjpfx Agwod 10000 rpm Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 762 mm, controller model: Fanuc MXP-200FP, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Hfsdpfxew Nv I Is Agwod Travel Axes X-axis travel: 2,100 mm Y-axis travel: 1,020 mm Z-axis travel: 762 mm Spindle Spindle speed: 6,000 rpm Spindle power: approx. 22 kW Spindle torque: approx. 550 Nm Spindle taper: SK 50 Max. tool diameter: 120/240 mm Max. tool length: 350 mm Table Table clamping surface: 2,300 x 1,020 mm Table load capacity: max. 3,000 kg Number of T-slots: 6 x 22 mm T-slot spacing: 150 mm MACHINE DETAILS Control: Fanuc MXP-200FP EQUIPMENT Tool changer with chain magazine, 40 stations Coolant unit with through-spindle coolant pump and filter Emulsion mist extraction Electronic handwheel 2 pcs. magnetic clamping plates 800 x 400 mm Various SK50 tool holders Chip conveyor Note: Oversized load transportation is required for this machine.

Condition: good (used), Year of construction: 2001, operating hours: 26,385 h, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 905 x 2,000 mm Max. table load: 1,400 kg Rapid traverse X/Y/Z-axis: 30 m/min Feed rate: 1 - 8,000 mm/min Main spindle Speed range: 10,000 rpm Spindle taper: SK 40 Main drive power: 18.5 kW Tool magazine Number of tool pockets: 30 Max. tool diameter: 80 mm Max. tool diameter with adjacent slot empty: 110 mm Max. tool length: 350 mm Hfjdowtfv Dopfx Agwjd Max. tool weight: 8 kg MACHINE DETAILS Total connected load: 22 kVA Machine weight: approx. 10,500 kg Machine dimensions (L x W x H): approx. 4.50 x 3.50 x 3.10 m EQUIPMENT - ICS (internal coolant supply) - Manuals SOFTWARE - EIA - Spiral - Eia 3D comp. - Rotation - Geometric - Scaling - Ext-Data i/O - Shape comp. - Thread - Inverse Time - Auto TLM - Comparison Stop - G54.1 - Sync. Tap - Gebn Dsv R Ezceztw Tebn (original, unable to translate, probably software module code) - G00 Slope Const. - Variable 600 Sets - Navigation - Eia Helical Tap Cycle - Mazatrol Helical - Mazatrol Planet Tap

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power. Hodpfxjvrxd Hj Agwsfd

Condition: like new (used), Year of construction: 2019, functionality: fully functional, operating hours: 6 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, number of slots in tool magazine: 60, table length: 1,600 mm, table width: 1,400 mm, spindle speed (max.): 5,000 rpm, table load: 5,000 kg, CNC traveling column milling center with rotary table and 1° x 1° automatic milling head (ISO 50) with 5,000 rpm Assembly, alignment, and commissioning available! TECHNICAL DETAILS Control: HEIDENHAIN TNC 640, HSCI X-axis: 2,500 mm Y-axis: 1,400 mm Z-axis: 1,400 mm Table size (L x W): 1,600 x 1,400 mm T-slots (number): 9 T-slots (width): 22 mm T-slots (spacing): 125 mm Max. table load: 5,000 kg Spindle Tool holder: DIN 69871 50 ISO Spindle speeds: 0 - 5,000 rpm Feed and rapid traverse Feed rate (X/Y/Z): 10 m/min Hjdpfxev Ryays Agwjfd Rapid traverse (X/Y/Z): 25 m/min Tool changer Number of tool stations: 60 Max. tool diameter: 125 / 250 mm Max. tool length: 350 mm Max. tool weight: 20 kg MACHINE DETAILS Main drive motor power: 24 / 28 kW Machine weight: 16,000 kg Control on: 229 min / approx. 4 h Machine on: 2,073 min / approx. 35 h Spindle running time: 334 min / approx. 6 h Program run: 877 min / approx. 15 h EQUIPMENT - MC 7522 main computer - Software: Rotary table machining, coordinate conversions, tilting of the working plane, interpolation - circle in 3 axes - MONTRONIX machine protection: crash detection, overload detection, black box - Portable, electronic handwheel HEIDENHAIN HR 510 - 3 SIEMENS AC servo feed motors - Linear measuring system via HEIDENHAIN measuring rods with DA 400 compressed air system - Universal automatic milling head K5; 5,000 rpm / 1.0° x 1.0° - bi-rotating - Horizontal chain tool changer for 60 pockets including spindle orientation - HEIDENHAIN TS460 workpiece measuring system, infrared and radio transmission - HEIDENHAIN SE 660 transmitter and receiver unit - Through-spindle cooling, 16 bar with paper filter, including cooling water spray gun with separate 9 bar pump - Air through-spindle, max. 10 bar, controlled via M function and soft key on the control keyboard - Spindle orientation for rigid thread cutting - Head and ZF gear cooling - Precision recirculating ball screws in all axes - Hydraulic counterbalance in the Z-axis PARKER - Chip conveyor system with one rear hinged conveyor - Telescopic guide covers in all three axes - Cone blow-off device via M function - Automatic central lubrication DROPSA - Coolant system Max. 8 bar via nozzle row, pressure adjustable via frequency control. - Compressed air via nozzle ring via M-function - Automatic blow-out unit of the cone - A2 + A4 head - Automatic power off via M-function - Rittal control cabinet with Rittal air conditioning and lighting - Work lighting - Central machine operation via the control panel - 5 pull studs DOCUMENTATION - Operating instructions - Programming instructions - Maintenance instructions - Lubrication instructions - Electrical diagrams - CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 22, Continuous table for longer parts or with partition wall for pendulum machining TECHNICAL DETAILS Control: Heidenhain TNC 410 X travel: 1,760 mm Y travel: 500 mm Z travel: 600 mm Table size: 2,000 x 500 mm Feed rates: 1 - 10,000 mm/min Rapid traverse: 25/25/20 m/min Spindle speeds: 60 - 6,000 rpm Spindle taper: ISO 40 Tool changer: 22 positions Hfjdpowvit Sofx Agwsd MACHINE DETAILS Total power requirement: 69 kW Machine weight: approx. 10,000 kg Space requirements: approx. 4.2 x 2.3 x 2.7 m EQUIPMENT - Additional clamping tables (3 units)

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Hfodpfx Agswyv Nzjwod Length: 8000mm Width: 3800mm Height: 3800mm

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Hfsdpfx Agowycmmewjd Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, operating hours: 40,593 h, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol Fusion 640T, rotational speed (max.): 12,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm X-axis feed: 36,000 mm/min Control: Mazatrol Fusion 640T Table Table length: 2,000 mm Table width: 760 mm Table load: 1,400 kg Hfsdpfx Aov I Samjgwed Spindle Tool holder: 40 ISO/BT/MK Speed: 12,000 rpm MACHINE DETAILS Length: 4,450 mm Width: 3,460 mm Height: 3,100 mm Weight: 11,500 kg Operating hours: 40,593 h EQUIPMENT - 2 large front doors - Chip conveyor with internal cooling

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 stroke Y axis 800 stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Chip conveyor Hsdpfx Agel Dr D Ujwsfd Coolant gun

Condition: excellent (used), Year of construction: 1999, Technical data: Hfodpfjtn Ravox Agwod see photos

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine with Mitsubishi CNC control, but with the BAUER user interface, no CNC knowledge is required. SK 40 tool holder, Automatic tool changer for 10 tools, Automatic tool length measurement, Hsdpfxswhftrj Agwsfd DXF and DSTV data import, Handwheel, Pendulum machining (but without light barrier protection), Light barrier on the operator side, Spindle motor 7.5 kW, Spindle speed 200-4000 rpm, 21.5" touchscreen, Additional office software license, Retractable protective hood

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 002840, travel distance X-axis: 1,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, overall weight: 9,000 kg, - Year of manufacture: 2000 - Single owner, used in own operation - Fully functional, powered up, ready for demonstration - Control system: Heidenhain TNC 426 - Tool magazine: 30 positions - X-axis travel: 1800 mm - Y-axis travel: 520 mm Hsdpfx Aexgq A Tegwofd - Z-axis travel: 520 mm - Pendulum operation: 2 x 700 x 520 mm - High-pressure band filter system / ICS - Coolant supply through spindle: 20 bar - Cross belt conveyor: 50 x 1800 Net price ex location Luckenwalde (Germany), unloaded, excluding transport

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, type of input current: AC, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Osai, controller model: OPEN M, feed rate X-axis: 85 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 15,000 W, number of spindles: 1, rotational speed (max.): 24,000 rpm, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, BIESSE MATERIA CL5020 5-axis CNC machining center. Cartesian suspension bridge construction. Brushless servomotors, rack-and-pinion systems, guideways with preloaded recirculating ball bearings. X 5000mm 85m/min Y 2000 60m/min Hsdpfxsuhw Hmo Agwofd Z 1200 60m/min B +/- 120° 30rpm C +/- 245° 30rpm Fixed table with mounting holes and jig centering 15kW electrospindle head with 8-position automatic tool change, HSK F63 shank NC OSAI OPEN M Automatic grease lubrication Supply voltage 3 x 400V / 50Hz (+/-5%) Supply pressure 6 bar Working used machine.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 970 mm, number of slots in tool magazine: 20, controller model: Fanuc, spindle motor power: 12,000 W, number of spindles: 1, rapid traverse Z-axis: 70 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 24,000 rpm, Equipment: documentation/manual, CMS ARES 3618 PX5 model 5-axis CNC machining center. Cartesian suspended post construction. Hsdpjuhwl Asfx Agwjfd Brushless servomotors, rack and pinion systems, guideways with preloaded recirculating ball bearing pads. X 3600mm 80m/min Y 1800mm 80m/min Z 970mm 70m/min C 540° 30rpm A 315° 30rpm Fixed table with suction table. Head with 12kW electrospindle at 24,000 rpm max with 20-position automatic tool changer and HSK F63 attachment. Fanuc 18ì-MB5 NC Automatic grease lubrication. Supply voltage 3 x 400V / 50Hz (+/-5%). Supply pressure 6 bar. Used machine in good condition, fully retrofitted internally.