Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit 2nd unit: Gluing unit 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Kjdpfx Anjz Ni Rmeiedu Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Tools: Edge planing unit CE marking

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Ksdpfx Anjz Iru Deisdu Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Kdsdpoz Ni Hnjfx Aniju Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: used, Year of construction: 2018, functionality: fully functional, Edge banding machine, Format 4 Tempora F600, Type 60.06L with Smart-Touch Year of manufacture: 2018 Location: Freising Kdedpfx Ans Aaz N Usiju Inspection is welcome. We have other used machines available. Please contact us.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 20 m/min, total height: 1,500 mm, total length: 8,850 mm, total width: 1,250 mm, overall weight: 4,000 kg, year of last overhaul: 2021, Equipment: documentation/manual, Nabízíme k prodeji použitou, repasovanou olepovačku OTT PROFIMATIC PM 2508-F, určenou pro olepování hran tavným lepidlem PUR a EVA. Stroj je plně funkční. Stroj má elektronicky řízený agregáty na konci stroje nově instalovaný frézovací agregát pro drážky, falce a různé jiné frézování. Stroj je v pravostranném provedení a je určen k olepování dýhových, umělohmotných a masivních hran. Stoj je vybaven předfrézovacím agregátem (2 motory) pro frézování čelní plochy. Jedná se o jednostrannou olepovačku s obsluhou z pravé strany, určenou pro nalepování a opracování hran z dýhy, umělé hmoty a masivních hran. Technické parametry Tloušťka hrany: 0,2 - 20 mm Minimální šířka pracovního dílce: 70 mm Minimální výška pracovního dílce: 8 mm Maximální výška pracovního dílce: 60 mm Minimální délka dílce: 150 mm Provozní napětí: 400 V / 50 Hz Průběžná rychlost: 10-20 m/min Nanášení lepidla: válec pro nanášení lepidla s dávkovací automatikou Vario Melt - lepidlo EVA + tavný PUR Stroj kompletně olepí nábytkové dílce včetně rožkování. Pracovní výška: 880 mm Připojení stlačeného vzduchu: 6 bar / 1/4" Rozměry stroje Výška: 1 500 mm Šířka: 1 250 mm Délka: 8 850 mm Hmotnost: 4 000 kg Kode Aa Aqyjpfx Anijdu PUR balíček: obsahuje rychlovýměnnou hlavu a trychtýř Stroj prošel v roce 2021 repasem v závodě OTT v Lambachu. Tuto skutečnost jsme schopni doložit dokumenty. Po repasování byl do stroje nainstalován nový software, nová řídící jednotka a obrazovka. V případě zájmu jsme schopni poskytnout veškeré dostupné technické podklady, potvrzení o provedeném repasování stroje a další související dokumentaci. Na vyžádání rádi zašleme také videa stroje z provozu.

Condition: used, Year of construction: 2018, functionality: fully functional, Planer jointer Felder A 951L Year of manufacture: 2018 Location: Freising Kdsdpfx Ae Aaz I Rjniju Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), functionality: fully functional, pre-milling unit glue station for edge banding guillotine pressure rollers unit for precisely trimming the edge unit for milling the excess edge material from the top and bottom of the workpiece corner rounding unit radius edger polishers machine length 450 cm year of manufacture 2016 11 kW Kdjdpo Abbbgsfx Aniou 400V

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 5192, functionality: fully functional, operating hours: 812 h, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 40 mm, height adjustment type: mechanical, feed rate X-axis: 4 m/min, actuation type: electric, total height: 1,620 mm, total length: 3,640 mm, total width: 980 mm, overall weight: 850 kg, Equipment: CE marking, documentation/manual, We offer this very well-maintained BI-MATIC 4.5 D.Y.T.S. edge banding machine, manufactured in 2007. Manufacturer: BI-MATIC Model: 4.5 D.Y.T.S. Serial number: 5192 Year of manufacture: 2007 Voltage: 400 V Frequency: 50 Hz Current: 9 A Weight: 850 kg Pressure: 6 bar Operating hours: 6447 m Hot melt adhesive Units: - Gluing unit - Flush trimming units - Radius trimming units Kdjdpfs Aarnuex Anieu - Corner rounding units - Buffing units The units can be activated or deactivated separately. - Industrial design for precise edge processing - Integrated control panel with display - Emergency stop switch for increased safety - Robust housing in a neutral gray color - Feeding system for the edge strips The machine is in good visual condition, as can be seen in the pictures. It provides a solid basis for clean results in furniture manufacturing or interior design. If you have any questions about this machine, please do not hesitate to contact me. If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2012, condition: used, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Kjdpfx Ans Aba Rtsiedu

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Corner rounding (two units – for faster processing) Scrapers Buffing/polishing unit Kjdjz Smxuepfx Aniodu Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Sprayers. Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 * Machine length: 9,200 mm * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) Kdjdpfx Aoz S U S Ienieu 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 70 mm, workpiece length (max.): 100 mm, height adjustment type: electric, Equipment: CE marking, For sale: a professional edge banding machine, FELDER FORMAT4 tempora F600 60.06 glueBox, manufactured in 2021. The machine was purchased new and has been used by a single company since its acquisition. It is in very good condition, regularly cleaned, and serviced. It has only been used for 300,000 linear meters. Machine features: X-motion PLUS – control with an 18" Smartouch screen memory for work programs and precise adjustment of parameters feed speed of 10 / 18 m/min pre-milling unit with diamond cutters additionally reinforced pre-milling unit, 2 × 1.5 kW pre-milling unit with a height of 64 mm automatic edge feeding and the option of feeding wooden veneer strips magazine for wooden veneer strips, 120 mm pneumatic pressure unit guillotine shears for edges from rolls, 0.4–3 mm saw unit for trimming with two motors and frequency inverters multi-functional x-motion PLUS milling unit with independent upper and lower motors motorized adjustment of the unit in 2 axes unit for rounding the corners of boards, softforming and postforming profile edge trimming unit – R2 mm upper and lower polishing units sprayer for cleaning agent sprayer for anti-adhesive agent on the feed side application of lubricant for delicate edge surfaces table with air cushion and retractable support extended feed table automatic central lubrication pneumatic-mechanical lock to prevent premature feeding of the next piece LED lighting Additionally: Kedpj Aara Rsfx Anisdu The machine has two sets of heads. One set is currently in use, while the second set is new and has not yet been sharpened. The machine is ready to operate, without the need for any additional investment to start production. The machine can be inspected and tested while in operation.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Kjds Abrzqepfx Aniodu Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm Kdedpfx Ans Aa A I Soieu New gluing station installed in 2015

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg Kedpfx Aozy Sfconiodu

Condition: good (used), Year of construction: 2008, machine/vehicle number: 50028, functionality: fully functional, operating hours: 16,000 h, The machine has the following functions: 1. Pre-milling cutters. 2. All lamps are in working order. 3. One container. 4. It has saws that cut forward and backward. 5. It has milling cutters at the top and bottom. 6. It has a rounding cutter for shaping edges. 7. It has a cycling function for processing solid wood. 8. It has a cleaning unit. 9. It has two bottles for cleaning. Kdsdpoz H I H Hsfx Aniju

Condition: good (used), Year of construction: 2012, functionality: fully functional, operating hours: 3,800 h, Well-maintained edge banding machine Homag KAL 210 Ambition 2264 from a carpentry workshop (not used in industrial production). Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2012 Operating hours: approx. 3,800 h Units: - Release agent spraying unit, top/bottom - Joining milling unit (2 x 3 kW) - Gluing unit A20 (with 2 rollers) - Trimming unit HL84 (2 x 0.8 kW, bevel/straight) - Pre-milling unit BF10 (2 x 1.5 kW) - Profiling milling unit FK11 - Profiling trimming blade PN10 - Finishing unit (glue seam trimming blade & buffing unit) Control system: - power Control PC22 Technical data: - Feed rate: 18-25 m/min. - Workpiece thickness: 12 - 60 mm - Edge thickness: Strips: 0.4 - 20 mm, Roll: 0.3 - 3 mm - Length: 7,845 mm Ksdpfx Ansz I Efcoiedu #CS1

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two draw knives. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed speed: approx. 10 m/min Noise protection hood Retractable workpiece support Extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy machine operation 4 programs can be saved. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs. Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently available Upper pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the panel Gluing unit with automatic edge feed for roll material up to 3 mm, switchable for co-rotating and counter-rotating Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering and rounding Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius draw knife R2, pneumatically retractable with quick-change device Glue seam draw knife with large roller, pneumatically controlled Hood locking CE marking All cutting inserts of the milling units and draw knives have been replaced or sharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good visually. Very good condition, see original photos. Machine dimensions: approx. 4550 x 1250 x 1550 mm (L x W x H) Weight: approx. 1400 kg. Kjdpfx Anezzqwmsiodu The machine can be demonstrated on site after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application Kodpfx Anez R A U Isiedu • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: used, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Year of manufacture: 2013 Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes Kdsdpfxjyrp Uaj Anisu - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Ksdpfs Aax Izex Aniodu Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible. Kdedpfxjzki Dke Anisu

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Kedpozu T Sgofx Aniedu Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Kdodez I R Snjpfx Aniju Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Year of manufacture: 2018 Colour: White Weight: 3.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit Kdodpfxezw El Ro Aniju - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Feed speed control: Variable - Left or right-sided: Yes - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels