Apex Auctions

Condition: good (used), System TM Opti-Kap 5003 Gbjlhswi T Uaoccqksl Were running at about 50 meters per minute per Opti-kap. Individual controls. Have been running 38 x 76 up to 50 x 152. Servo control chop saw. Nominal electrical panel current: 37.5 Amps (50 Amps installed) each. Partial infeed belts available and no outfeed belts. Installed brand new and commissioned in 2015. Running on 2 x 9 hr shifts, 5 days a week. Packed into 2, 40 foot containers. All cabling still included and labelled for easy reconnection. Serviced in house with a yearly service inspection from the OEM. OEM also had a direct line too the equipment for assisting with fault finding.

Condition: good (used), Bundle infeed. System TM. Opti-feed 6000, Estimated speed of 72 boards per minute. Originally designed for 3 meter boards. Have been running 2.1 to 3.3 meter boards. Automatic sticker removal. Electric controls included. Were running 38 x 76 up to 50 x 152. Nominal electrical panel current: 52.4 Amps (63 Amps installed) Gbolhccqswi T Srjksl Ledinek pre-planer. Ledinek. Stratoplan 4V-S250 (260Kw/470A, 3 X 400V at 50Hz, Air pressure at 6 bar). Cutter speed is up to 5000 revolutions per minute. Feed speed 40 – 250 m/min. Working width: 55 – 300 mm. Working height: 25 – 125 mm. Minimum working length: 1800 mm. Were running 38 x 76 up to 50 x 152 Installed brand new and commissioned in 2015. Running on 2 x 9 hr shifts, 5 days a week. Packed into 6, 40 foot containers. All cabling still included and labelled for easy reconnection. There is an extra set of cutters in the containers going with the machine. Serviced in house with a yearly service inspection from the OEM. OEM also had a direct line too the equipment for assisting with fault finding.

Condition: good (used), Year of construction: 2006, JET Model GH-2280ZX Geared Head Precision Gap Bed Centre Lathe With Accurite 200S DRO 3 Jaw Chuck. Ø560mm Swing Over Bed. Ø330mm Swing Over Cross Slide. Ø736mm Swing Over Gap. Distance Between Centres 2,000mm. Length of Gap 305mm. Spindle Bore Ø79mm. Compound Slide Travel 130mm. Width of Bed 333mm. Spindle Nose D1-8. Range of Longitudinal Feeds 0.04–23.19mm/rev. Range of Cross Feeds 0.15–0.93mm/rev. Number of inch Threads 61, Range Of Inch Threads 1-5/8 – 72 (tpi). Number of Metric Threads 24, Range of Metric Threads .05 – 20. Multifix Quick Change Toolpost. Tailstock Spindle Travel 152mm. Tailstock Taper MT5. Maximum Tool Size 25 x 25mm. S/No. 5020079 (2006). With Steady Rest, Coolant System, Low Voltage Light & Manuals. Overall Dimensions L3,318 x W1,075 x H1,354mm. Weight 3,145kg. Gslhcswi T Nqscqkebl

Condition: good (used), Year of construction: 2008, 2008 Kaeser CSD 102 SFC Rotary Screw Compressor with Sigma Digital Controller Golhccqjwi T Igjkobl Capacity 437~1,200m³/h. Maximum Working Pressure 8.5Bar. Motor Speed 3,000RPM. Rated Power 55.0kW. Ambient Temperature 3~45˚C. Flexible Expansion Connection. S/No. 1036 Air Flow Ducting Included. Dimensions (W)2,300 x (D)1,000 x (H)1,900mm

Year of construction: 2021, Condition: excellent (used), 2021 Optima VAM X-plore FFP 17xx Face Mask Assembly Packing and Boxing Production Line Manufactured from Medical Grade Stainless Steel, Aluminium and PTFE. Includes an 8 Axis Carbon Fibre Picking and Placing Robot. Automated Assembly of Face Mask Valves. (2) Tampo Hermetic 130 Printing Systems. Siemens Simatic HMI Digital Control and SICK Safety Laser System. S/No. 2303717.2406 Gbjlhccswi T H Nsqkjl Amotek Flow Wrap System. Krause Fabrication. Roto Swiss Tech Dust Extraction. (2) MTA Rotary Sorting Bowls. Nordson Adhesive System. Produced approximately 250,000 Face Masks. Line Dimensions (W)30.0 x (D)5.0 x (H)3.0m.

Condition: good (used), Year of construction: 2007, 2007 HAAS VF5/50HE 3 AXIS VERTICAL MACHINING CENTRE WITH 4th AXIS UNIT & HAAS CONTROL Gbjlhowi T Akeccqkol Table Size 1372 x 610mm - X Travel: 1270mm Y Travel: 660mm Z Travel: 635mm - CT50 Spindle taper - 30 Tool ATC - Rapid Traverse XYZ: 18m/min - Max Weight on Table: 1814kgs - Max. Spindle Speed 7500rpm (2-Speed Gearbox) - Main Motor Power: 22.4kW - 750 MB internal memory - 2018 Software - Approx. Dimensions: (W) 4270mm x (D) 2600mm x (H) 3100mm. Serial Number 1055551 - (2007) Enhanced Through Spindle Coolant System - Haas HRT 310 Rotary Table - TS27R contact tool setting probe & OMP40 inspection probe - Recently Replaced:- Nitrogen System, Screen. Recently Refurbished:- Coolant pump & Cabinet Door.

Condition: used, Year of construction: 2004, Gildemeister CTX 410 CNC Slant Bed Lathe With GE Fanuc Series 21i-TB Control & Hydrafeed Multifeed MX-1B Bar Feeder Gjlswi Tz Tjhccqkobl Rota NCD 250-86 3 Jaw Power Chuck. Maximum Swing Ø505mm. Maximum Turning Ø365mm. Standard Turning Ø320mm. Maximum Turning Length 600mm. Maximum Bar Capacity Ø65mm. Maximum Spindle Speed 5,000rpm (21kW Motor). Axis Travel 'X'=250mm, 'Z'=635mm, 'C'=360°. Rapid Traverse 'X'=24m/min, 'Z'=30m/min. 12 Station Turret (12 Driven Tooling Positions), Driven Tool Maximum Spindle Speed 4,000rpm(2.2kW Motor). Maximum Tailstock Travel 580mm, Rapid Traverse 8m/min. Hydrafeed Multifeed MX-1B Bar Feeder Length 2,450mm. S/No. 01360000581 (2004). With Coolant System (175 Litre), Chip Conveyor, Parts Catcher, Oil Skimmer, Foot Switch, Renishaw RP3 Tool Setting Arm, Tailstock, Signal Tower, Tooling Package, Large Quantity Of Hard/Soft Jaws, Boring Bar Sleeves, Bar Feeder Guide Bushes & Manuals. Overall Dimensions L4,296 x W1,715 x H1,770mm. Weight 4,500kg. Note: Machine Has Had A Turret Refurb & New Chuck Clamping Cylinder In The Last 12 Months.

Condition: used, Year of construction: 2002, Deckel Maho DMU 70 Evolution 5 Axis Machining Centre With Heidenhain ITNC 426 Control Table Dimension 700 x 500mm (7 'T' Slots). Maximum Table Load 350kg. Axis Travel 'X'=800mm, 'Y'=600mm, 'Z'=520mm, 'C'=360°(Resolution 0.001°), 'B'=180°(Resolution 0.001°). Rapid Traverse 'X,Y,Z'=50m/min. Cutting Feed 'X,Y,Z'=0-20,000mm/min. Maximum Spindle Speed 18,000rpm (22.5kW Motor). Spindle Taper HSK 63A. 32 Position ATC. Maximum Tool Ø80mm, Maximum Tool Length 315mm, Maximum Tool Weight 6kg. S/No. 15035705054 (2002). With Interlit Through Coolant Paper Filtration Unit (900 Litre), Blechtechnik Chip Conveyor, Filtermist FX4002 Mist Extraction Unit, Blum Laser Tool Presetter/Breakage Detection Unit, Renishaw OMP60 Spindle Inspection Probe, Visiport TK2 Spin Window, Handwheel & Manuals. Approx Overall Dimensions (L x W x H): 5,320 x 2,574 x 2,829mm. Weight 8,320kg Gslhcjwi Tztscqkebl

Condition: excellent (used), Year of construction: 2012, CMZ TC30 YS Twin Spindle CNC Lathe With Fanuc Series 32i Model B Plus Control & LNS Quick Load S80 S2 Bar Feeder Main Spindle SMW Autoblok 250BB Ø255mm Power Chuck, Sub Spindle SMW Autoblok 165BH Ø165mm Power Chuck. Maximum Swing Over Bed Ø920mm. Maximum Swing Over Carriage Ø745mm. Maximum Turning Ø520mm. Distance Between Chuck Faces 773.7mm. Axis Travel 'X'=315mm, 'Y'= +80mm -60mm, 'Z'=800mm, 'B'=803mm. Rapid Traverse 'X'=30m/min, 'Y'=15m/min, 'Z'=30m/min, 'B'=20m/min. Acceleration 1 g (1g=9,8 m/sec2 ). Main Spindle Maximum Speed 3,500rpm (42kW Motor), Spindle Nose ASA 8" A2, Maximum Bar Ø77mm. Sub Spindle Maximum Speed 5,000rpm (14kW Motor), Spindle Nose ASA 6" A2, Maximum Bar Ø46mm. 16 Position Turret (16 Driven Tool Positions) Tool Section 25 x 25mm, Driven Tool Maximum Speed 4,000rpm (16kW Motor). LNS Quick Load S80 S2 Bar Feeder Length 2,000mm. S/No. 426 (2012). Golowi Tx Ejhccqkjbl With Coolant System (300 Litre), Chip Conveyor, Renishaw Tool Setting Arm, Parts Catcher, Parts Conveyor, Daikin Inverter Oil Chiller, ACS OMF 1000 Mist Extraction Unit, Dual Foot Switches, Signal Tower, Quantity Of Jaws, Bar Feeder Guide Bushes & Manuals. Overall Dimensions W2,803 x W2,020 x H2,236mm. Weight 7,500kg

Condition: excellent (used), Year of construction: 2023, CMZ TTL-66-66-T1Y-T2Y Twin Spindle, Twin Turret CNC Lathe With Fanuc Series 31i Model B Plus Control & MSV 65 Bar Feeder Main Spindle Hainbuch Axzug 65 Collet Chuck, Sub Spindle Hainbuch Axfix 65 Collet Chuck. Maximum Swing Ø240mm. Maximum Turning Ø220mm. Distance Between Spindle Nose & Tailstock Centre 614mm. Distance Between Centres 800mm. Axis Travel 'X1'=167.5mm, 'X2'=167.5mm, 'X3'=± 120mm, 'Z1'=515mm, 'Z2'=515mm, 'Z3=580mm, 'Y'=± 45mm. Rapid Traverse 'X'=30m/min, 'Y'=30m/min, 'Z'=20m/min. Acceleration 1g=9,8 m/s2. Main Spindle Maximum Speed 4,000rpm (35.5kW Motor), Spindle Nose ASA 6” A2, Drawbar Bore Ø66mm. Sub Spindle Maximum Speed 4,000rpm (35.5kW Motor), Spindle Nose ASA 6” A2, Drawbar Bore Ø66mm. Twin Turrets 12 Position (24 Index Positions), Section Of Turning Tools 20 x20mm, Tool Change Time 0.17sec, 12 Position Driven Tools, Driven Tool Maximum Speed 12,000rpm (14kW Motor). Tailstock Morse Taper CM3, Tailstock Travel 580mm. Hydrafeed MSV 65 Bar Feeder Length 2,140mm. S/No. 261. Gbelhccowi Tw Ieqksl With Tooling Package Of Turning Tool Holders & Driven Tool Holders, High Pressure Coolant System (Capacity 510L Side, 330L Rear), Lubriserv Mist Extraction Unit, Daikin Oil Chiller, Renishaw RP3 Detachable Tool Setting Arm, Signal Tower, Bar Feeder Guide Bars & Manuals. Overall Dimensions L2,860 x W2,377 x H2,289mm. Weight 9,855kg.

Condition: excellent (used), Year of construction: 2018, MPS Mess-& Prüfsysteme 15kV Typ WPP15 Partial Discharge Alternating Current Testset Geljwhv T Njhccqkjbl S/No.218 027. Asset No.ETI-HW-021 (02/2018).

Condition: excellent (used), Year of construction: 2016, 2016 Axe & Status Tuscan LD48 x 3000 Heavy Duty CNC Straight Bed Lathe With 'C' Axis, Driven Tooling & Fanuc Control Fanuc (Guide i) Oi-TF Control. Bison Ø400mm 3 Jaw Manual Chuck. Swing Over Bed Ø1,220mm. Swing Over Cross Slide Ø625mm. Distance Between Centres 3,200mm. Spindle Bore Ø153mm. Axis Travel 'X'=650mm, 'Z'=3,000mm. Axis Rapid Traverse 'X'=6m/min, 'Z'=6m/min. Speed Range 9-600rpm (37kW Motor). 12 Position Duplomatic VDI-60 Turret. Tailstock Quill Ø165mm, Quill Travel 250mm, MT6 Taper. Turning Tool Shank 32 x 32mm. Low Cutting Hours Of 1,037. S/No. LD2448062. With Dual Chip Conveyors, Coolant System, Renishaw RMP60M Inspection Probe, Win Well MCA-15D Mist Extraction Unit, Quantity Of Assorted VDI 60 Turning & Driven Toolholders, (3) 3 Point Fixed Steadies, Taper Shank Fixed/Revolving Centres, Soft Jaws, Dual Derstrong Gyro-Posy Derdisc 200-A1 Spin Visual Windows, Handwheel, Signal Tower & Manuals. Machine Dimensions L 8,000 x W3,000 x H2,250mm. Approx. weight 15,400kg. Note: Machine Has Full Annual Service History. Gbslswhv Rushccqksl

Condition: new, Functionality: fully functional, Unused Dando Watertec 40 Truck Mounted Water Well Drilling Unit Left Hand Drive Man 8*8 Truck. 40 Ton Mast - 7.6m Working Stroke. Gardner Denver Mud Pump 8 x 71/2. Doosan Compressor 10/70 350CFM. FMC Foam Pump IO413. Dando 1,000 Power Swivel 20:1 Ratio. Caterpillar C15 Engine. 6 Ton Drilling Winch. 2 Ton Auxiliary Winch. 24” Guide Table & Breakout Wrench. Hydraulic Pumps, Motors Etc. Sliding Carriage Assembly. (2019) Gbslhcewhv I Tscqkjl (See Attached Brochure For Additional Technical Information).

Condition: refurbished (used), Year of construction: 2017, 2017 (Refurbished 2021) Unison Breeze 100 Single / Multistacking CNC Tube Bender Bending Capacity Ø100 x 2.00mm. Bend Torque 30,000Nm. Servo Controlled Follower 180˚ at 30 CLR. Collet Capacity Ø100mm. Axis Maximum Speed / Feed 500mm/sec. Bend 70˚/sec. Rotation 360˚/sec. Maximum Stacks At Maximum OD = 3. Maximum Bend Radius =40mm. Maximum Bend Angle 200˚. Load Height 1,200mm. Maximum Tube Length 3,100mm. Maximum Tube Length Hitch = 5,700mm. Multi-radius Is Standard. Repeatability And Accuracy = Feed 0.05 / 0.10mm, Bend 0.05 / 0.10mm, Rotation 0.05 / 0.10˚. 480V 3PH. Full Load Current 94A. Approximate Machine Dimensions (W)8,000 x (D)2,000 x (H)2,300mm. S/No. 2792 (2017) 2792B (2021). Gbelhowhv H Aoccqksl NOTE: A loading charge of £250 + VAT will be added to the buyers invoice.

Condition: good (used), Year of construction: 2002, 2002 Nakamura-Tome TW-10 Twin Turret Twin Spindle Slant Bed Turning Center with Fanuc Series 18-T Control Gjlhccqewhv E Sjkjbl Crawford Type D Collet Chuck Ø34mm Bore. SMW Autoblock Ø170mm 3 Jaw Power Sub-Chuck. Maximum Turning Ø180mm. Maximum Turning Length 154.9mm. 2 x 12 Station Turrets with 12 Rotating Tool Facility. Distance Between Centres 765mm. Maximum Spindle Speed 6,000rpm. Spindle Motor 5.5kW. S/No. W106301. Includes Turret Base Holders and Iscar Through Tool Grooving and Parting System. Grundfos CR2-220 25Bar High Pressure Coolant System. Renishaw NC1-TX Non-Contact Laser Tool Setting System. No Other Tools Included. Includes Spare Collets, Soft Jaws. Manuals and Software. Machine Weight 5.2 Tonnes. Machine (W)4,500 x (D)2,200 x (H)1,800mm. IEMCA KID 80 Automatic Barfeed System with Siemens Control. Feeding Rack 1,600 x 700mm. Bar Feed Dimensions (W)2,040 x (D)1,200 x (H)1,100mm.

Condition: good (used), Year of construction: 2006, 2006 Doosan Mynx-750 Vertical CNC Machining Center with Fanuc Series 21i-MB Control Table Dimension 1,600 x 750mm (6 x 17mm T Slots at 125mm Centre). Maximum Table Load 1,500kg. Axis Travel 'X'=1,500mm, 'Y'=760mm, 'Z'=650mm. Rapid Feed 'X/Y' Axis 30 m/min, 'Z' Axis 24 m/min. Maximum Spindle Speed 12,000 RPM (Motor 10.0kW). Spindle Nose BT40. 30 Station ATC. S/No. MYNX750065. Moxa Wireless File Transfer System. Renishaw Machine Probe With Renishaw OMP60 Spindle Probe Included. Remote Axis Control. 300 Ltr Coolant Tank To Supply Through Spindle Coolant And Flood. Twin Screw Auger To LNS Turbo Plate Type Swarf Conveyor. Internal LED Lighting. Machine Status Tower. No Tooling Included. Machine Dimensions (W)4,800 x (D)3,300 x (H)3,500mm. Gslhcswhv Dzecqksbl

Condition: excellent (used), OPAL-RT Technologies OP5707XG-4 Series RCP/HIL FPGA-based real-time simulator Gjlhccowhv A Roqkobl

Condition: excellent (used), Year of construction: 2022, 2022 Haas VF-4SS CNC Vertical Machining Centre with Haas M130 Media Display and Haas 4th Axis Unit Machine Bed (W)900 x (D)350mm with 5 x 16mm T Slots at 63mm Centres. 'X'=1,270 'Y'=508 'Z'=635mm. Rapid Traverse Maximum 35m/min. 30HP Inline Direct Drive Spindle with Maximum 12,000 RPM. 30 Position BT40 Pocket Side Mounted ATC. S/No. 1188437 (2022). Gslhccqewhvxlekjbl Haas Universal 4th Axis with Ø250mm Rotary Table. Renishaw OMI-2H Machine Probe and Haas Renishaw OTS Tool Probe. HaasDrop Wireless File Transfer. Screw Type Swarf Removal Auger. Declaration of Conformity (x2). Remote Axis Control. Box of Accessories. Manuals. NOTE - A Loading Charge of £ 200 plus VAT (if applicable) Will Be Added to the Invoice.

Year of construction: 2022, Condition: excellent (used), 2022 Prosaw Mega Machine Co. Ltd BS-330GA Horizontal Automatic Feed Vice Power Saw Gbelhccowhvvwsqksl Maximum Capacity Ø330mm. □ 350 x 250mm. Bundle 250 x 165mm. Blade Speed 20 - 72m/min. Feed Stroke Maximum 400mm. Blade Size 3,820 x 34 x 1.1mm. Bed Height 593mm. Dimensions (W)2,250 x (D)2,000 x (H)1,800mm. Weight 1,410kg. S/No. 220315. Blade Guide with Internal Coolant Feed. Hydraulic Screwed Auger Swarf Feed. Hydraulic Bundling Clamps Included. Includes Roller Conveyor. (W)550 x (D)1,950 x (H)630mm

Condition: excellent (used), Year of construction: 2022, 2022 Mazak QuickTurn 350MA CNC Multitasking Lathe With Mazatrol Smooth G Control Gbelhcjwgyxmscqkjl Ø400mm Kitagawa B-15 3 Jaw Power Chuck. Maximum Swing Ø720mm. Standard Machining Ø276mm. Maximum Machining Ø420mm. Maximum Bar Capacity Ø102mm. Distance Between Spindle End & Turret End Face 97-1,442mm. Maximum Support Weight Chuck Work Main Spindle 650kg, Maximum Support Weight Shaft Work Main Spindle 1,000kg. Axis Travel 'X'=265mm, 'Z'=1,350mm. Rapid Traverse 'X'=30m/min, 'Z'=33m/min. Main Spindle Speed Range 35-3,300rpm (30kW Motor). Spindle Nose JIS A2-11. Maximum Milling Speed 5,000rpm (7.5kW Motor). 12 Position Turret. Tool Size (OD Turning) 25mm. Tool Size (ID Turning) 50 mm. Indexing Time (Single Step) 0.29sec, Indexing Time (Full Turn) 0.72Sec. Tailstock Centre MT5, Tailstock Travel 1,265mm, Tailstock Thrust 10,000N. S/No. 306921.

Condition: used, Dean Smith & Grace Type 1709 x 40 Lathe with Heidenhain ND7013 Touchscreen DRO Ø405mm 4 Jaw Chuck. Swing Over Bed Ø432mm. Swing Over Cross Slide Ø229mm. Swing Over Gap Ø660mm. Centre Height 216mm. Distance Between Centres 1,000mm. (20) Speed Range 16-2,000rpm. Spindle Bore Ø76mm. QTC. S/No. 41238-3-79. Geljwgyv Sshccqkjbl With Coolant System, Bott 2 door Storage Cabinet With Contents Of Toolholders, Tooling & Handtools. Steel Storage Rack With 3 Faceplates, 2 Fixed Steadies, Ø305mm 3 Jaw Chuck, Ø305mm 4 Jaw Chuck. Weight 2,540kg.

Condition: used, Year of construction: 1986, Huron KU6 Universal Milling Machine With Heidenhain ND 780 3 Axis DRO Table Dimension 2,000 x 420mm (5 'T' Slots). Longitudinal Travel 1,500mm, Cross Travel 700mm, Vertical Travel 470mm. Spindle Speeds 30–2,066rpm. Spindle Taper ISO 40. Feeds Longitudinal & Cross 1.6–820mm/min, Vertical 0.8–410mm/min. S/No. 5816. Gelhccqewgyv Ejkebl With Coolant System, Heavy Duty Machine Vice, Interlocked Surround Guarding & E-Stop. Approximate Dimensions 2,850 x 2,100 x 1,800mm, Approximate Weight 4,500kg. Note: Fixtures Not Included.

Condition: excellent (used), Year of construction: 2013, 2013 Vixen Jet Wash Type Model FL200 S/No. 2602 - Basket Compartment Area 2m Diameter, Max Load 1000kg Gjlhcowgyvfecqkebl

Condition: excellent (used), Year of construction: 2013, 2013 Highcon Euclid (Direct to Pack) Digital Cutting and Creasing Machine Gjlhcev U A Syecqkjbl Atlas Copco GA45 Compressor with Elektronicon Control. Lauda UC-0650 2 Spix Highcon PWP SR TS °C Chiller. Maximum Speed 1,500 Sheets/Hour. Maximum Sheet Size 760 x 1,060 mm (30 x 42 inches). Maximum Stock Weight 550 gsm. Maximum Media Thickness 0.6 mm (24 pt.). Supported Substrates Label and Paperboard Thicknesses From 0.2 mm to 0.6 mm and N & F Microflute Up To 1.2 mm (47 pt.). Utilises Highcon's Patented Digital Adhesive Rule Technology (DART) For Creating Digital Crease Lines and High-speed Laser Cutting. S/No.TL 50053. Integrated Extraction LTG VSRMM250/8 RD360. Machine Dimensions (W)8,600 x (D)2,100 x (H)2,300mm. Machine Weight 6.5 Tonnes. Oil-Injected Rotary Screw Air Compressor. 125L/Sec. 45kW. 3,000RPM. Weight 1 Tonne. (W)1,680 x (D)850 x (H)1,550mm. Lauda Chiller Temperature Range -5°C - 25°C. Pressure Nominal 3.7Bar, Maximum 4.7Bar. Pump Flow Nominal 196L/Min, Maximum 420L/Min. 60dBA. Water Reservoir Volume 300L. (W)1,000 x (D)1,565 x (H)1,965mm. Donaldson Torit DCE ART 501/N4 RD0 Extraction Facility. 965m³/h. Filter 10 m² Cartridge Type. 75 dB(A). 1.5kW. (W)3,900 x (D)1,700 x (H)5,000. Chimney (H)5,500mm. See Additional Documentation Attached.

Condition: excellent (used), Year of construction: 2019, 2019 ROBBI OMICRON CNC 3610 UNIVERSAL GRINDER WITH SIEMENS 840D TOUCHSCREEN CONTROL & VM25 BALANCE SYSTEM Working Capacity: Max Distance Between Centres 1,030mm. Max Grinding Length 1,030mm. Height of Centres Above Table 180mm. Swing Over Table Ø355mm. Max Weight on Centres 250kg. Table 'Z' Axis Travel 1,180mm, Swivel On Either Side +7°/-4°, Automatic Traverse min 4mm, Feed 1-5,000 mm/min. Wheelhead 'X' Axis Swivel ±180°, Manual Position Travel 200mm, Stroke 380mm, Feed 0.2-3,000 mm/min, Rotation Speed 600-1,600rpm (5.5kW Motor). Workhead Rotation Speed 0-600rpm (1.5kW Motor), Spindle Through Bore Ø31mm, Swivel 90°. Tailstock Quill Stroke 70mm, Quill Ø70mm, Internal Centre MT5. External Grinding Wheel Specifications Ø450mm x Width 20-80mm, Bore Ø127mm. S/No. 021934. With Nuova Sara EDY Filtra Coolant Filtration System, Micron Filter Dust Extraction Unit, Tailstock, 3 Fixed Steadies, Dressing Unit, Internal Grinding Quills, Ø320mm 4 Jaw Chuck, Hard Jaws, Hand Wheel, Foot Switches, Tooling & Manuals. Machine Dimension L3,700 x W1,500 x H2,100mm. Weight 4,700kg. Gbjlhsv U A Risccqkol