Used machining centers with flat or grid table for sale (329)

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Hodpfx Ahjwkbbdj Djfr Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC Hjdpfxodx R Dfe Ah Dsfr • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1961, controller manufacturer: Siemens, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 72 mm, total length: 18,300 mm, total width: 9,710 mm, number of spindles: 2, number of slots in tool magazine: 60, Retrofitted in 2016 Ready for operation Includes stacking and unstacking gantry crane Hjdpfx Ajx Ezh Teh Dsfr

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, Next to new nesting CNC machining center 4-axis nesting CNC machining center. Purchased new in 10/2019. Has been used for less than 900 hours. The business for which the machine was acquired ceased due to the Corona pandemic, and usage has therefore been very minimal. The machine has been connected to an AL-KO extraction system, which is also for sale in a separate listing. Table size 3600x1500 mm. The machine can be used as a nesting table machine or, by removing the panel, vacuum pods can be used to raise the workpiece for machining. The machine is in full working order in all respects and is an excellent alternative to a new machine. Automatic 10-position tool changer, 2 x Busch rotary vane vacuum pumps (250 m³/h each). The work area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Slot saw. Automatic tool height measurement (enables processing the same job with several tools without noticeable height differences). Supplied with bSolid software in Finnish. Suitable saw aggregate and planer aggregate also available for sale. The machining unit features collision sensors, so safety fencing is not required. The buyer is responsible for all costs related to relocation, including the preparation and transport of the machine (these services can be arranged, for example, through the machine's importer). Hedpfx Aoxz Rfqeh Dofr

Condition: used, Year of construction: 2001, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No Hfjdpsxzcnkefx Ah Dsr - CE marking present: Yes - CE certificate present: No - Serial number: AA1/011994 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, this machine is 2 tactical table tenoning CNC. The condition is practically brand new. It was purchased for the project that failed to launch so it has only several hours on the clock. Hedpoxyxzqofx Ah Djfr It's a great deal with considerable discount, because it did cost 18000EUR

Condition: good (used), Infotec 1008 Rotary CNC machine Hodpfox Ai T Nox Ah Defr adjustable RPM, manual or auto, 3Ph

Condition: new, Year of construction: 2026, CNC drilling and dowel insertion center for doors (rails and stiles) and window components for a rational and professional production of doweled frames. Short introduction: • Universal CNC controlled drilling and dowel inserting machine for door stiles and rails as well as for window profile processing • Glue shot monitoring via GIC Hfodpodx R A Uefx Ah Der • Closed gluing system • Optional, additional horizontal drilling spindles • Relieves CNC machining centers

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Hodpfsw Nadyex Ah Djfr Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: AA2/001307, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, nominal power (apparent): 15 kVA, controller manufacturer: NUM, controller model: 1040, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,350 mm, table height: 950 mm, table length: 6,500 mm, spindle speed (min.): 24,000 rpm, spindle motor power: 11 W, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Operating system: Windows XP Hodpfjw Au N Sox Ah Dsfr Xilog Plus Maestro Weight approx. 5,450 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, feed length X-axis: 2,800 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: CNI, controller model: N-Conex, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 60 mm, total height: 2,400 mm, total length: 11,500 mm, total width: 3,700 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 9,000 W, number of spindles: 10, number of slots in tool magazine: 12, Poyraz Makina VIGOR 2128 Flat Table CNC Machining Center (Year of manufacture: 2023) Very well-maintained CNC nesting machine from first ownership, fully functional and ready for immediate use. Technical specifications: Hjdpfoxwa Erex Ah Dofr Working area: 2100 × 2800 × 250 mm HSD spindle 9 kW / 24,000 rpm (Italy) CNI N-Conex control (Linux based on Windows 7) Becker vacuum pump 250 m³/h, 8 zones 12-position rotary tool changer Equipment: – Automatic tool measurement – Automatic lubrication (Dropsa) – Automatic labelling (barcode system) – Loading & lift system – Discharge system with conveyor belt – Pressure rollers for multi-panel processing Machine is ideal for furniture production, doors, cabinet parts, kitchens, and interior fittings. Location: Bulgaria. Inspection possible at any time.

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. Hjdpswdny Tefx Ah Defr - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Hfjdpfxjx Ap Ako Ah Der Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines Hsdpfjdx Axfsx Ah Dsfr

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit Hodpswka Upefx Ah Djfr - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,550 mm, feed rate X-axis: 96 m/min, feed rate Y-axis: 96 m/min, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,700 mm Travel Y-axis: 1,550 mm Hedoxw Up Sjpfx Ah Dofr Stroke X-axis: 4,538 mm Stroke Y-axis: 1,952 mm Maximum workpiece clearance: 100 mm Movement speed X-axis: 96 m/min Movement speed Y-axis: 96 m/min Movement speed Z-axis: 25 m/min Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool positions: 8 Nesting Table Length: 1,550 mm Width: 3,700 mm Material: Bakelite Number of pumps: 4 Individual capacity: 108 m³/h Drilling Unit Unit: top Spindles for vertical drilling: 7 Milling Unit Unit: top Number of controlled axes: 3 automatic tool changer: yes Motor power: 9 kW Max. speed: 24,000 rpm MACHINE DETAILS Installed total power: 26 kW EQUIPMENT Vacuum pump Control system PC85 Software WoodWOP CE marking Safety light curtains Note: Tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 13,802 h, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 Hfedpfsxgdc Hsx Ah Djr DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg Hfsdpfx Ajw Sguwoh Der - immediately available -

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center HOLZ-HER DYNESTIC 7507 Year of production: 2017 Technical condition: very good Technical data: - 3-axis machine - Table dimensions: 4600 × 2200 mm - 8-position tool changer - Drilling head with 10 vertical and 6 horizontal drill bits Hfjdpfx Ahex Haa De Dor - 3 vacuum pumps - Multi-zone table (Multizone) - Labelling unit - External reference stops

Condition: new, Year of construction: 2026, Multi-spindle thrufeed bore and dowel insertion machine in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Double sided boring and dowel inserter with a workpiece return transport system • Small footprint requirement for a multi-spindle thrufeed dowel insertion machine • Optional, additional vertical drilling units • Closed gluing system • Double sided drill glue dowel machine for high capacity Hfsdpfx Ahedx Axkj Der

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, TECHNICAL DETAILS Travel Paths X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical Drilling Unit X-Direction Drill spindles: 16 Z-axis stroke: 60 mm Drilling depth: max. 38 mm Rotation direction: right/left Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle pitch: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical Drilling Unit Y-Direction Drill spindles: 15 Z-axis stroke: 60 mm Drive: 1.5 kW Rotation direction: right/left Speed: 1,500 - 5,900 rpm Chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle pitch: 32 mm (15 spindles) Hfodpfx Ahsxtng Nj Djr Spindle type: individually controllable Arrangement: Y-direction Horizontal Drilling Unit X-Direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: left Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal Drilling Unit Y-Direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: right Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling Motor Motor power: 7.5/10 kW (S1/S6 operation) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool Changer Magazine Magazine slots: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC EQUIPMENT Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air manifold with quick couplings Extraction hood for additional top router motor Top router 5 kW with hydraulic quick-clamping system Protective fence on the left with door Safety tread mat 3,250 mm Control cabinet on the left

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, TECHNICAL DETAILS Travel range X-axis: 2,500 mm Travel range Y-axis: 1,300 mm Number of tool stations: 16 Drilling unit Unit: top Spindles for vertical drilling: 7 Total number of vertical and horizontal spindles: 7 Milling unit Unit: top Number of controlled axes: 5 Automatic tool changer Motor power: 7 kW Max. speed: 18,000 rpm Hfedpoxw Ukcjfx Ah Der MACHINE DETAILS Installed total power: 20 kW EQUIPMENT Nesting Protective structure of the units Safety sensors Protective grids mounted on the machine

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Hfsdpfexg Ehdjx Ah Dsr Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Hsdpjwfdm Eofx Ah Defr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 4,300 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Travel range X-axis: 2,500 mm Travel range Y-axis: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed, milling unit 1: 24,000 rpm Spindle speed, milling unit 2: 24,000 rpm Spindle speed, milling unit 3: 24,000 rpm Number of controlled axes, milling unit 1: 4 Number of controlled axes, milling unit 2: 3 Number of controlled axes, milling unit 3: 3 MACHINE DETAILS Number of work zones: 2 Number of grippers: 9+4 Motor power, milling unit 1: 12 kW Motor power, milling unit 2: 12 kW Motor power, milling unit 3: 12 kW Tool magazine 1: 14 positions, located on the side of the machine Tool magazine 2: 14 positions, located on the side of the machine EQUIPMENT Grippers for holding the workpiece Automatic panel loading system Motorized transfer Automatic tool changer Printer for barcode labels Hsdpfx Ahexw Ugdo Defr CE marking Machine-mounted safety fences Note: Tools and the automatic chip extraction system are not included in the offer.