Used Machining centers with traverse tables for sale (2)

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 Djln Towdnqxjig Tjut The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection Djljufggwjn Tig Tsut SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -