Used Material testing for sale (493)

Condition: refurbished (used), Conventional Vickers and Brinell hardness testing machine Manufacturer: WOLPERT Type: Dia-Testor 2Rc (1-lever device) Test load levels: Vickers: ( 1 / 2 / 3 *) 5 - 10 - 20 - 30 - 40 - 50 Brinell: 15.625 - 31.25 - 62.5 - 125 - 187.5 - 250 Rockwell: 10 preload - 60 (HRA) - 100 (HRB) - 150 (HRC) * above marked load levels for Vickers are only conditionally calibratable. The different load levels are set by load selection - push buttons. Test space (H/D) : 300 / 130 mm Dimensions (H/W/D) : 940 / 350 / 620 mm Weight (kg) : approx. 200 Condition : used, overhauled, warranty included Painting : RAL 9001 (cream white) Creln Sxjhinpdj R Reb This device is completed by our Hardsoft measuring system. Through the digital evaluation you get a fully documentable measuring system.

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Cjln Sov Tywqjx R Rorb Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), For the application of thermocouples/thermocouple wires. Crolewc Ud Non Sx R Reb Used only for laboratory applications.

Condition: like new (used), Binder FED 400 as good as new. PRODUCT DESCRIPTION The BINDER FED series heating chamber offers almost unlimited performance options and is particularly adaptable. Thanks to the extended time functions and the adjustable fan, the temperature and convection conditions can be ideally controlled. KEY FEATURES Temperature range: Ambient temperature plus 5 °C to 300 °C APT.line™ preheating chamber technology Adjustable fan speed Adjustable air outlet flap Controller with extended time functions 2 chrome-plated wire shelves Creln Ssv Up Nxjx R Reb Independent, adjustable temperature protection class 2 (DIN 12880) with visual alarm Interface for connecting to a computer: RS 422

Year of construction: 2008, operating hours: 85,654 h, Condition: repair required (used), Functionality: not functional, A defective 17m³ climate chamber is for sale. The compressor of the pre-cooling stage is probably defective (see photo, red X), a detailed inspection has not been carried out. The system is being sold defective. Crsln Sxovmwyco R Rob Temperature range: -60°C to + 100°C Humidity range: 10 to 95% r.H Dew point range: +5°C to +89°C The system can be inspected by prior appointment. Deployment takes place at ground level through sufficiently large doors, here assistance can be offered, otherwise the buyer is responsible for deployment and removal.

Year of construction: 2010, Condition: excellent (used), Binder KBWF 240 growth cabinet Features: Temperature range: 0 °C to 70 °C Humidity range: 10 % r.h. to 80 % r.h. APT.line preheating chamber technology Adjustable fan speed Humidity control with capacitive humidity sensor and steam humidification Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording Display via LCD color monitor Tight-closing inner door made of safety glass (ESG) with special TIMELESS coating 2 stainless steel slide-in grilles Entry port with silicone plug 30 mm, left Temperature selector monitor class 3.1 (DIN 12880) with visual and acoustic temperature alarm Computer interface: Ethernet Door heating Max. load: 51 - 100 kg Width outside: 925 mm Crjln Sxovtlq Ns R Rjb Width inside: 650 mm External height: 1465 mm Interior height: 785 mm Depth outside: 800 mm Depth inside: 485 mm Interior volume: 201 - 300 l Weight: 214.00 kg Manufacturer's price: 27.909,06 € You can find more items - new and used - in our store! International shipping costs on request!

Condition: refurbished (used), Conventional hardness testing machine according to Vickers and Brinell Celn Sxsird Nas R Rjrb Manufacturer: WOLPERT Type: Dia-Testor 2n (1-lever device) Test load levels: Vickers: ( 1 / 2 / 3 *) 5 - 10 - 20 - 30 - 40 - 50 Brinell: 15.625 - 31.25 - 62.5 - 125 - 187.5 - 250 * above marked load levels for Vickers are only conditionally calibratable. The different load levels are set by load selection - push buttons. Test space (H/D) : 300 / 130 mm Dimensions (H/W/D) : 940 / 350 / 620 mm Weight (kg) : approx. 200 Condition : used, overhauled, warranty included Painting : RAL 9001 (cream white) This device is completed by our Hardsoft measuring system. Through the digital evaluation you get a fully documentable measuring system.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Colov Tnd Sjn Sx R Rjrb Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Manufacturer: Thermo Scientific Heraeus Model: UT 6420 Type : Drying / heating oven Temperature : 300°C Power : 4,2 kW Capacity : 350 L Cslnsv Spgfo Sx R Rsrb Timer Inside dimensions : W 50 x D 55 x H 130 cm Exterior dimensions: 75 x 75 x 180 cm

Condition: as good as new (ex-display), Year of construction: 2022, Binder VDL 115 vacuum dryer like new. Manufacturer's description: Fast, gentle drying Safe operation thanks to the safety concept in accordance with the ATEX directive Also optionally available as a complete modular system with vacuum pump and pump cabinet Temperature range: ambient temperature +9 °C to +110 °C Device complies with ATEX standards: EX II 2/3/- G IIB T3 Gb/Gc/- X Intuitive controller with touchscreen graphical display of pressure and temperature Software-controlled drying monitoring with automatic aeration at the end of the process Internal data logger, measured values in open format can be read via USB Pressure safety device for activating heating from < 100 mbar 2 aluminium expansion shelves, individually positionable Universal connection for ventilation with ambient air or inert gas Universal access port with small DN 16 flange and cap, for mounting sensors or feeding power lines into the chamber. Safety glass pane, spring-mounted, with splash protection Large viewing window PC interface: Ethernet Optional equipment Crjln Sxsvq I Tno R Reb Shelves – choice of aluminium or stainless steel shelves depending on the requirements of the given test Analog output for pressure and temperature signals – for external monitoring and analysis of process parameters, can be integrated with your own systems Universal ventilation – various ventilation options: air or inert gas DN 40 access port – for inserting external measuring instruments APT-COM Multi Management Software – device parameter management, recording and documentation Services – a wide range of service services ensures correct operation of the devices External dimensions: width 743 [mm] height 942 [mm] depth 581 [mm] Internal dimensions: width 506 [mm] height 506 [mm] depth 460 [mm]

Operating hours: 56,530 h, Condition: good (used), Espec PR-3KP climatic test chamber -20 to +100 °C Features: Manufacturer: Espec Cslor H Dr Njn Sx R Rerb Type: PR-3KP Temperature range: -20 to +100 °C Humidity: 20 to 98 % rH Refrigerant R-404A:- CFC-free - ozone-friendly Operating hours: 56530 Dimensions: External dimensions: HxWxD= 1680 x 1050 x 1200 mm Chamber dimensions: HxWxD= 850 x 600 x 800 mm Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +150°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the chamber: ± 0.8 - 1 K Temperature change rate (with test sample: approx. 20 kg aluminum/plastic) Heating in the range: -40°C to +90°C: 4 K/min linear Cooling in the range: +90°C to -40°C: 4 K/min linear Data for climate tests: Temperature range: +10 to +95°C Humidity range: 10% RH up to 95% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +88°C Mechanical load data: Test chamber floor 150 kg Maximum chamber floor load 250 kg Test chamber dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Test chamber lighting: 12 V, 20 W halogen bulb Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated power 32 kW, Rated current 59 A External control via the RS 232 interface is also possible. Refrigerant: R404A / R23 Test chamber weight approx. 800 kg Machine set weight approx. 850 kg Weight: 1650 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Coln Sxsvclugo R Rerb Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1990, Condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Cjlnsh Izh Ij Sx R Rjrb Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +180°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the usable space: ± 0.5 - 1 K Temperature change rate (according to IEC 60068-3-5) Heating: 1.5 K/min Cooling: 1.5 K/min Data for climate tests: Temperature range: +10 to +90°C Humidity range: 10% RH up to 98% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +89°C Mechanical load data: of the test chamber floor 150 kg Maximum chamber floor load 250 kg Dimensions of the test chamber: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Test chamber lighting: Halogen bulb 12 V, 20 W Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power 15 kW, Rated current 34 A External control via the RS 232 interface is of course possible. Refrigerant: R404A / R23 Weight: 1550 kg Crolsu Au Eren Sx R Rsb For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Vötsch VCS 4100 climatic test chamber - 40 °C to + 180 °C Manufacturer: Vötsch Type: VCS 4100 Temp. range: - 40 °C to + 180 C Mains voltage: 400 V Csln Sx Rouuiygj Rsrb Rated current: 17 A Nominal output: 11 kW Refrigerant: R404A KK-07 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Crolnsv Sr Hze Sx R Reb Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1998, Condition: good (used), Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Article No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Creln Sxeuuin Ro R Rob Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of construction: 1998 TK 09 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Weiss Type: SC 1000 SaltEvent Salt Spray Test Chamber Test Chamber Volume 1028 liters Test Chamber Dimensions Height with hood 1140 mm Height without hood 720 mm Width 1670 mm Width to spray channel 1560 mm Depth 645 mm Celn Sev Srbrex R Rerb System Dimensions Height 1370 mm Width 2925 mm Depth 980 mm Temperature Range Salt spray test 5 K above ambient temperature up to +50 °C Condensation test 5 K above ambient temperature up to +42 °C Temperature stability, over time ±1.0 K Water consumption Salt spray test 0.4 l/h Condensation test 34.0 liters Spray solution consumption Salt spray test 0.9 l/h Compressed air consumption for salt spray test 1.4 l m3/h Ventilation 7.0 m3/h Calibration values for salt spray test +35 °C Test room temperature for condensate test +40 °C Calibration value for humidifier temperature, pressure humidifier +49 °C Voltage: 1/N/PE AC 230V ± 10% 50Hz Rated power 2.6 kW Rated current 11.3 A Weight: 372 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch VC 0150 climatic test chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climatic test chamber Voltage: 230 V Rated power: 1.5 kW Volume: 1540 liters Temp. range: 0°C to +90°C Humidity: 10% to 98% Coln Sxeuuikfs R Rsrb Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor controller List price: 19500 € KK-09 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Vötsch Crelnjv R Ty Tj Sx R Rob Type: VCS³ 7027-10 Vötsch Climatic Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Temperature test data: Temperature range -72°C to +180°C Temperature deviation over time in the center of the work space ± 0.3 K to ± 0.5 K Temperature deviation over space ± 0.5 K to ± 2.0 K Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min Climatic test data: Temperature range +10°C to +95°C (Extended climatic range: 2°C/95% RH, controlled for a maximum of 2 hours) Temperature deviation over time in the center of the work space ± 0.2 K to ± 0.3 K Temperature deviation over space ± 0.5 K to ± 1.0 K Humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters Side opening 50 mm Side opening 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on-site: 63 A slow-blow Refrigerant R404A/R-23 Weight approx. 835 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Zwick Type: Z30 Technical Specifications: Total Height 2114 mm Width 748 mm Depth 580 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm Clip-On Extensometer 40 mm Computer + Software testXpert II V3.5 Condition: Used Total Weight Approx. 500 g Scope of Delivery: (See Image) (Subject to change and errors in the technical specifications, information is subject to change!) Coln Sx Rsv Rn Ife Rerb We are happy to answer any further questions over the phone. Written orders can be placed by email or fax.

Condition: used, Zwick Type: Z20 Technical Specifications: Stroke: 200 mm H x W x D 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm MFA 25 Extensometer (Temperature range up to +200°C) Crsln Ssv Rdtwsx R Rjb Computer + Software testXpert II V3.5 Air Conditioning Unit: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Temperature change: 1 K/min Refrigerant R404 5 kg Condition: Used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to change or errors in the technical data. Information is subject to change.) Subject to change without notice!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Zwick Tensile Test Machine Type: HA 50 Dimensions: Height 2685 mm Footprint: 1600 cm² Technical Specifications: Fmax: 50 kN Vmax: 1500 mm/s Accessories: Kistler 50 kN force sensor via NI-Labview Hydraulic power unit 280 bar Footprint: 415 cm² Crjlnev Rdp Eo Sx R Rjb Clamping tool/specimen holder included (Universal flange, high-strength jaws for specimen holders) Computer + software testXpert R V6.0.0 Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, RS Simulators Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) Celev Rcbaen Sx R Rerb The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Cjln Sxov N Hc Es R Rjrb Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.