Used material testing for sale (476)

Year of construction: 1999, condition: used, 25 bar, refrigerant R404, 4.2 kg, 11.5 kW Technical data Rodpfxsyfpf Se Aazen Dimensions (L x W x H) approx. 1880 x 1850 x 1380 mm Weight approx. 840 kg

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Rodpfxjx Uz Rto Aazen Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification Redpfx Aaox Ux Ivszon BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) Rsdpfx Aex Up Igoazen - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Binder Model: FP 115 Binder Drying Oven with Forced Air Circulation Description: For sale is a high-quality BINDER FP 115 drying oven / heating cabinet from a laboratory inventory. Ideally suited for laboratory, industrial, workshop, research, or educational use. The control is digital, and the temperature remains stable throughout operation. The interior is made of metal and equipped with multiple pull-out shelves. Maximum load: 11 – 50 kg Technical Data (as per nameplate): Max. temperature: 300 °C (572 °F) Rated power: 1.60 kW Connection: 230 V / 1~ Current consumption: 7.0 A Frequency: 50/60 Hz Protection class: IP20 Temperature safety: DIN 12880, Class 2.0 Rsdpsx Uph Hofx Aazen Internal volume: approx. 115 liters Internal width (incubators...): 600 mm Internal depth (incubators...): 410 mm Internal height (incubators...): 480 mm External width (incubators...): 835 mm External depth (incubators...): 645 mm External height (incubators...): 705 mm Important note: "The table shown in the photos is not included in the sale." Item weight: 62 kg Condition: used Scope of delivery: (See photo) (Specifications and details subject to change and error!) If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), KARG KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg - 1.200 g Rsdpfex Trg Njx Aazen - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2025, Binder FD 720 Dryer from 2025, like new PRODUCT DESCRIPTION Rodpfxoyahp Sj Aazen The BINDER FD Avantgarde.Line series dryer is designed for situations where especially fast drying and sterilization are required. Thanks to uniform temperature distribution, rapid dynamics, and an efficient fan, this dryer helps save valuable time. MAIN FEATURES Temperature Range: - Ambient temperature plus 12°C up to 300°C - Up to 30% lower energy consumption than leading market devices - High temperature accuracy with APT.line™ technology - Forced air convection - Controller with LCD display - Electromechanical exhaust air flap control - 2 chrome-plated wire shelves - Integrated, independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm - Ergonomic handle design - USB port for data recording

Condition: like new (used), Year of construction: 2025, Binder M 720 Laboratory Dryer, Like New, Year 2025 Rsdpfx Ajyahnueazon PRODUCT DESCRIPTION The M series material testing chambers, featuring a maximum temperature of +300°C and multiple programming options, are perfectly suited for materials testing and ageing studies. Thanks to high airflow, high-performance fans provide rapid heating. KEY FEATURES Temperature range: +14°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Reinforced fan with adjustable speed Electromechanical exhaust air flap control Intuitive controller with touchscreen and programmable time-segment and real-time functions 2 chrome-plated racks Independent, adjustable class 2 (DIN 12880) temperature safety device and optional independent class 3.1 (DIN 12880) temperature safety device with visual/acoustic alarm selectable on the controller Failsafe function – backup Pt 100 sensor PC interface: Ethernet Internal data logger; measured values can be read in an open format via USB

Condition: like new (used), Year of construction: 2025, Binder KBWF 720 Chamber, ex-demo 2025, like new. Temperature range: 0 °C to 70 °C Temperature range with lighting: 10 °C to 60 °C Humidity range: 10% to 80% relative humidity Adjustable light cassette modules The fitotron chambers of the KBWF series, thanks to natural lighting, provide uniform and stable lighting, humidity, and temperature conditions. These units are ideal for plant and organism cultivation, as even light distribution and humidity control stimulate growth, similar to stable temperatures found in climate chambers. Temperature can be displayed in the range from 0 °C to 70 °C, with a resolution of one tenth of a degree, and humidity with an accuracy of one tenth of a percent. The device is equipped with a microprocessor that efficiently manages the humidification and dehumidification system. Humidity control utilizes a capacitive humidity sensor and steam humidification. Advanced programming allows precise operation of climate conditions, including long-term settings. Rsdpjyahm Rsfx Aazen As standard, the KBEF series chamber is equipped with adjustable light cassette modules, each containing 5 daylight fluorescent tubes. Special fluorescent tubes for plant cultivation are also available, featuring an optimized spectrum for photosynthesis—ideal for simulating perfect climate conditions in plant biotechnology, forestry, silviculture, or agriculture. Climate chambers with lighting and humidity control are also suitable for the pharmaceutical and chemical industries, quality assurance research, and material testing. Units are fitted with a controller supporting time segment programming and a color LCD monitor for high user comfort. Key features: - APT.line™ preheating chamber technology - Adjustable fan speed - Humidity control with capacitive humidity sensor and steam humidification - Intuitive touchscreen controller with segment and real-time programming - Internal data logger; measured values can be read in open format via USB - Device self-test for comprehensive status analysis - Airtight internal doors made of safety glass - Corrosion prevention of glass with special TIMELESS coating - Data display on color LCD monitor - Stainless steel wire shelves - 30 mm access port with silicone plug, left side - Class 3.1 temperature sensor with visual and acoustic temperature alarm - Computer interface: Ethernet - Door heating

Condition: like new (used), functionality: fully functional, Binder VD 115 Vacuum Dryer ex-demo, like new. PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. BINDER’s patented expansion shelves ensure optimal heat transfer. The shelves can be positioned freely, and the interior is easy to clean. KEY FEATURES Temperature range: Ambient temperature from +9°C to +220°C Controller with digital display for pressure and temperature Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data recorder, measurement values available in an open format, readable via USB 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 port – for introducing external measuring instruments Safety glass window, spring-mounted, with splash protection Large viewing window, optionally with interior lighting Computer interface: Ethernet Rjdpfeyahl Hex Aazen

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm Rjdpfxju N Avxs Aazen interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 1981, Manufacturer: ZWICK ROELL, Model: 1484, Year of manufacture: 1981, Tensile force: 250 kN, Travel distance: 1,400 mm, Optical system for deformation recording (from 2007), Evaluation unit, Sample punch ZWICK RZ 65, Sample grinding machine 7120 (in storage) +++ Attention: Machine is part of an online auction! +++ Rsdpfx Aaex R Ec Sozon

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10003426, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Rodpfx Aoyfgzksazjn Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. Rsdpfxoydazus Aazjn The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Redpjydanhsfx Aazsn Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: used, Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Rodpfxoyc U Uge Aazjn Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. Rodsyc U Rbjpfx Aazon The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Rsdpox Slm Hjfx Aazjn Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories Redpjx Sc Inefx Aazjn – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: used, Sample gas cooler -Measuring gas cooler with: protective lining Rjdpfjdnca Hex Aazon -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Condition: used, Pore finder, pore finder, surface tester Rsdpfxeb Uhtqe Aazsn -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Condition: used, Pore finder, pore finder, surface tester -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm -Weight: 7.5 kg Rodpob Riagefx Aazon

Condition: used, Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A -Dimensions: 245/220/H120 mm Rjdpfxsff Nmbj Aazen -Weight: 2.8 kg

Condition: used, Inductive conductivity transmitter -Type: 2 AMLid-184 Rodpfxeb Uhtgo Aazon -Sensor immersion depth: 1115 mm -Total length: 1337 mm -Weight: 3 kg

Condition: good (used), Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm Rjdpfx Aasmiqm Sszjn -Weight: 6.2 kg