Used Planing & moulding machines for sale (506)

Condition: used, Year of construction: 2020, Planing line Lifting table Cross conveyor Loading table Planer Leadermac 36 m/min Output table Cross conveyor Iedowtcm Hepfx Aabstn Mechanization manufactured in 2020

Condition: excellent (used), High speed infeed system up to 120 m/min with automatic board turner. 2 hydraulic stations 5.5 Kw each. Itedpfjxg Aw Aox Aaben

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Iedpfx Aajxgq S Iebotn Full Documentation included.

Condition: used, Weinig Profimat 22 with 4 shafts. Movable left shaft with measurement sensor, for automatic movement based on the width of the pieces inserted into the process. Dimensions and weight: Cm. 330*145*H160. Weight 1400 kg. (on pallet) Itsdpfx Aaoryb D Sebjn

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Isdopqxnxopfx Aabotn

Condition: excellent (used), Catalogue number: 7641 ADVANTAGES – The best wide-planing machine for wet and dry wood – Ideal for processing logs, floorboards, etc. – 3 planing heads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, condition very good TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Power-feed, toothed infeed roller - Pawls - Pressure unit - 2 toothed feed rollers - Pressure unit Itsdpfewfti Ajx Aabjn - 800 mm planing head, 4-knife, 7.5 kW - Pressure units - 800 mm profiling head, 4-knife (fitted with 3 straight knives and 1 profiling knife) - Pressure unit - Smooth, powered outfeed roller From below: - Guide bar - Infeed table - Smooth feed roller - 800 mm planing head, 4-knife, 7.5 kW - 2 smooth feed rollers - Split, smooth sliding roller - Side pressure at outfeed From behind: 2 vertical side spindles + pressure units: 1) right vertical, 90 mm, 4 kW 2) left vertical, 90 mm, 4 kW - Spindle diameter: 35 mm - Alternating spindle setup - Spindles adjustable vertically and horizontally 3) additional lower horizontal spindle, 350 mm, adjustable up/down and left/right, 5.5 kW - Spindle diameter: 40 mm At outfeed: 4 upper metal sliding rollers, 2 lower rubber feed rollers - Adjustable rollers in lower table - 6 feed speed settings: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction connection diameters: 3×180, 130 mm - Dimensions (L/W/H): 3100×2000×1900 mm - Weight approx.: 3500 kg Net price: 64,900 PLN Net price: 15,270 EUR based on exchange rate of 4.25 EUR (Prices may change due to larger fluctuations)

Condition: used, Multilateral Milling Cutter Equipment Designation: 4 Side Moulder Ijdpfx Aowph Saeabetn Type: Hypermac LMC - 826 Manufacturer: LMC Leadermac

Condition: used, Year of construction: 1980, 5 spindles – cast-iron base. Working width: 25–175 mm. Usable working height: 10–110 mm. Spindle rotation speed: 6000 rpm. Spindle diameter: 40 mm. Horizontal spindle length: 180 mm. Vertical spindle length: 130 mm. Minimum diameter of shaping tools: 100 mm. Maximum diameter of shaping tools: 200 mm. Maximum diameter of tools mounted on the universal spindle: 180 mm. Axial adjustment of horizontal spindles: 50 mm. Axial adjustment of vertical spindles: 45 mm. Feeding roller diameter: 140 mm. Iodpfx Asxl Tfbsabotn Pre-planing table length: 2000 mm. Variable feed speed: 4–24 m/min. Spring-loaded feed rollers. Motorized adjustment of the left spindle, movable with automatic programmer. Motor power: 1st horizontal bottom: HP 5.5 2nd–3rd vertical right + left: HP 4 + 5.5 4th horizontal top: HP 5.5 5th universal 380°: HP 5.5 Feed motor power: HP 3 MACHINE SOLD AS IS.

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) Itjdpexgq Shefx Aabsn 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: refurbished (used), Weinig brand moulder, mod. 22A Unimatic Workbench width: 220 mm, with ribbed table for short pieces. Cardan shaft drive. Itedpfx Aaju Sr Ddjbon Composition: Lower, Right, Left automatic, Right, Upper, Lower. The left movable shaft moves automatically according to the width of the inserted workpiece.

Condition: used, Year of construction: 1971, operating hours: 4,348 h, functionality: unexamined, machine/vehicle number: 462-1717, Used moulder Weinig PFA 17N, manufacturer: Michael Weinig KG, Tauberbischofsheim (Germany), model: PFA 17N, year of manufacture: 1971, machine number: 462-1717, 7 spindles (incl. universal spindle), spindle diameter: 40 mm, motor power approx. 3–5.5 kW per spindle, max. planing width approx. 170 mm, max. planing height approx. 120–140 mm, feed rate adjustable, weight approx. 3,500–4,000 kg. The machine is used and in age-appropriate condition. Itodexlacmepfx Aaben

Condition: excellent (used), Catalog number 7288 TECHNICAL DATA - max. width of the processed element 230mm - max. height of the processed element 130mm 6 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 15kW spindle 3 electrically adjustable right/left 4) horizontal upper 230mm 11kW 4 spindle electrically adjustable up/down 5) horizontal lower 230mm 7.5kW 6) universal 230mm, adjustable at an angle of 360° 11kW - all spindles adjustable up/down, right/left - all spindles equipped with a brake - spindle diameter 40mm - 4 input, pulling, metal, toothed rollers from above, including 2 double - 3 output pulling, smooth, rubber rollers from above, including 2 double - 2 output, rubber, pulling rollers from below - 3 side clamps from below - smooth feed speed adjustment - pneumatically pressed rollers - 3kW feed motor - electric planing thickness adjustment - 0.37kW body lifting motor - length of the insertion table 2480mm - closed in the cabin - central lubrication of the table - diameters of the extraction nozzle 130mm, 140mm, 4x125mm Itsdpferwmp Ujx Aabjn - dimensions length/width/height 4960x1760x1700mm - weight about 3500kg ADVANTAGES - Italian production - for 6 heads - unpainted machine - all spindles equipped with a brake - the last universal spindle - used planer, very good condition Original photos Net price: PLN 54900 Net price: EUR 12920 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Itodpfx Aoxgq Rwsabjn Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, Weinig brand moulding machine, Unimat U17N model with 7+1 axes, 170 mm axis length, with ruled table, cardan shaft drive. Axle composition: Bottom, right, left, right, top, bottom, left, universal. Axle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 Kw. Itsdjpfp Eljpfx Aabon Towing motor power 4 Kw raises and lowers 0.75 Kw.

Condition: excellent (used), CATALOGUE NUMBER 6674 TECHNICAL DATA - max planing width 150mm Isdpfx Aajiba Evobstn - max planing height 130mm 7 spindles: 1) horizontal bottom 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal top 150mm 4kW 5) horizontal bottom 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all spindles adjustable up/down and right/left - 4 pulling, toothed rollers from above - 4 rubber, pulling outfeed rollers from above - 2 pressures from above - electric adjustment of planing thickness 0.25kW - length of the infeed table 1970mm - central table lubrication - smooth feed speed adjustment - 1.5kW feed motor - diameters of exhaust ports 6x120mm - dimensions length/width/height 4000x1300x1600mm - weight about 3000kg - German production - 6 heads - used planer, very good condition Net price: PLN 36900 Net price: EUR 8680 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared Itedpfxjxgq Rdj Aabon No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: used, Weinig brand moulding machine, Unimat 17A model, cardan shaft drive, 7 shafts, composition: lower (Kw. 5.5), right (Kw. 5.5), left (Kw. 5.5), right (Kw. 5.5), upper (Kw. 5.5), lower (Kw. 6.5), universal (Kw. 2.2), complete with electronic inverter for speed regulation and meter counter. Itjdpfxettn Awj Aabjn

Condition: excellent (used), CATALOG NUMBER 7556 Technical data: - min / max width of the processed element 20 / 240mm - min / max height of the processed element 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up / down, right left - spindle diameter 40mm - from above: - 6 input rollers, pulling, toothed, including 2 double - 2 output rollers, pulling, smooth rubber - from below: - side pressure before and after the roller in the lower table - input roller, toothed, pulling, torsional in lower table before the first spindle - 2 pneumatic side clamps - pulling outfeed roller, metal, smooth - all rollers pressed pneumatically - length of the infeed table 2180mm - top adjustable top up/down - central lubrication Itjdpfx Aovyzn Rsaben - electric setting of planing thickness - lifting motor 0.75kW - smooth regulation of feed speed on the inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - closed in the cabin + - diameters of the exhaust nozzle 4x150mm - dimensions length/width/height 3750x1750x1800mm - weight 3300kg ADVANTAGES - for 4 heads - ideal for wet and dry wood - used machine, perfect condition Net price: PLN 75,900 Price net: 17850 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer Itsdpfxjxgq Nyj Aabsn 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Itedjk N I I Njpfx Aabsn

Condition: excellent (used), CATALOGUE NUMBER 7343 TECHNICAL DATA - max. width of the processed element 180mm - max. height of the processed element 120mm 4 spindles: 1) horizontal lower 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the infeed Ijdpfotx Tmmsx Aabjtn - 6 infeed, pulling, toothed rollers from above, including 1 double - double outfeed, pulling, rubber roller from above - input, pulling, toothed, wide, metal roller from below - output, pulling, metal, smooth roller from below - feed motor 2.2kW - feed on Cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - length of the insertion table 1580mm - diameter of the extraction nozzle 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAGES - ideal for wet and dry wood - unpainted - for 4 heads - DTR + CE documentation - used planer, very good condition Net price: PLN 46,900 Net price: EUR 11,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue No. 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: Itedpfx Aajw H Aqxjbon 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm * From above: - 8 metal, toothed infeed rollers, including 3 double rollers - 4 rubber outfeed rollers, smooth, including 2 double rollers * From below: - 3 smooth feed rollers - 3 side pressure rollers - Infinitely variable feed speed control via inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Kardan shaft drive feed - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of the safety cover - Pneumatic table blow-off - Centralized table lubrication - Extractor port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg ADVANTAGES - Made in Italy - 6-head configuration - For wet and dry timber - Pneumatic safety cover opening - Pneumatic table blow-off - Spindles 4 and 5 electrically adjustable - Used planer, very good condition Net price: 136,900 PLN Net price: 32,200 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the processed element 45 / 150mm - min / max height of the processed element 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up / down, right / left - spindle 2 manually adjustable right / left - spindle 2 electrically adjustable up / down - spindle 2 and 3 are equipped with brakes from above: - 3 input, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from below: - pressure at the inlet - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth regulation of feed speed 6-24m/min - 3kW feed motor - feed on Cardan shafts - length of the inlet top 1970mm Ijdpfjq Nnpfjx Aabjtn - automatic top lubrication system - diameter of the exhaust port 1x150mm, 2x140mm - dimensions length/width/height 3070x2000x1800mm - weight 2000kg ADVANTAGES - German production - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: PLN 125900 Net price: EUR 29600 Net price calculated according to the exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of the processed element 220mm - max. height of the processed element 120mm - 5 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2i3 11kW 4) horizontal top 220mm 11kW 5) horizontal bottom 220mm 5.5kW Ijdpfx Aaopmr T Aebetn - all spindles adjustable up/down, right/left - spindle diameter 40mm - pneumatic clamps - 4 input rollers, pulling, toothed, including 2 double - 1 double output roller, pulling, smooth, rubber, from above - output roller, pulling, rubber, from below - feed on Cardan rollers - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of the input table 1970mm - central lubrication - diameter of the extraction nozzle 4x120mm, 140mm - dimensions length/width/height 3500x1550x1400mm - weight 1750kg ADVANTAGES - 5 heads - German production - unpainted - used planer, very good condition Net price: PLN 48,900 Net price: EUR 11,500 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - max. width of the workpiece 230mm - min. width of the workpiece 15mm - max. height of the workpiece 160mm - min. height of the workpiece 10mm 7 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) horizontal upper 230mm 7.5kW 6) horizontal upper 230mm 7.5kW 7) horizontal lower 230mm 5.5kW Itjdpfxsryv Nye Aaben - all spindles adjustable up/down, right/left - spindle diameter 40mm - 3, 5, 6 spindles electrically adjustable from the desktop required dimension (ATS) - 2 x 0.37kW motor - 40mm spindle diameter - all spindles equipped with brake from above: - 8 infeed, pulling, toothed, metal rollers, including 2 double - 3 outfeed, pulling, rubber, double rollers from below: - infeed, toothed, pulling, torsion roller - 3 outfeed, pulling, metal, smooth rollers - pneumatically pressed rollers - length of the infeed table 2480mm - central lubrication of the table - electric adjustment of the planing thickness - 0.56kW body lifting motor - smooth regulation of the feed speed on the inverter 6-24m/min - 3.7kW feed motor - feed on Cardan shafts - diameter of the exhaust port 7x125mm - dimensions length/width/height 5520x1930x1900mm - weight about 4000kg ADVANTAGES - 7 heads - ideal for wet and dry wood - with ATS - original DTR + CE documentation - unpainted - used planer, perfect condition Original photos Net price: PLN 169900 Net price: EUR 39970 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)