Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Tip: 1300 W / 20 KHz Fpjb Etoh Rizzo D Stsg

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: X81467, clamping force: 9,000 kN, screw diameter: 115 mm, Used Stork IMM 9000-8650 injection molding machine. Fsbowhiy Ao Et D Stjpg The machine has been tested and repaired.

Condition: good (used), Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Feb Et Dju Rq Aij Stepg Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

Year of construction: 2025, operating hours: 1 h, Condition: new, Functionality: fully functional, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. 98T8Mrx The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Feb Etjum Rnvs D Stopg Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Fob Etsvrubns D Stopg

Year of construction: 2004, Condition: ready for operation (used), Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible. Fsb Etswg E Dns D Stepg

Condition: like new (used), Year of construction: 2020, operating hours: 56 h, Functionality: fully functional, machine/vehicle number: 016, Automatic machine for PE film rewinding and cutting PSF-11MS. Working hours 56, LIKE NEW! Film thickness 5-30 my. Mechanical speed, max 1600 m/min Tolerance of rewinding length 1 m Jumbo roll diameter, max 450 mm. Jumbo roll core width 320-520 mm Jumbo roll film width 300-500 mm Jumbo roll core 76 mm Finished roll diameter, max 150 mm Hand/machine roll core width 320-700 mm Mini roll film width 100 mm Fpjb Etewdrwce D Stog Finished roll cores 38, 50 mm Pneumatic system pressure 8+-2 atm Air consumption 100 l/min Temperature of workshop +10-+35 C Supply, voltage 380 V, 50 Hz Consumed power, max 5 kw/h Machine dimensions L1396xW1503xH1500 mm. Control box dimensions L400xW469xH930mm Net weight max 825 kg Includes outfeed table for finished rolls (2 m)

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 455 mm, displacement volume: 320 cm³, injection pressure: 1,590 bar, injection weight: 291 g, mold height (min.): 180 mm, ejector force: 3,300 N, ejector stroke: 140 mm, opening stroke: 420 mm, total length: 5,410 mm, total width: 1,450 mm, total height: 2,005 mm, overall weight: 5,200 kg, heating capacity: 9.75 kW (13.26 HP), number of injections: 1, power: 18.5 kW (25.15 HP), input frequency: 50 Hz, input voltage: 380 V, input current: 61 A, Equipment: documentation/manual, Used injection machine in good condition, ready for use. Without peripheral equipment. Fpeb Etowcyvko D Stog

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 250 Rotor width (mm) 450 Drive capacity (hp) 15 Rotor blades (pieces) 3 x 1 Stator knives (rows) 2 Hopper opening (mm) 340 x 450 Total length (mm) 1207 Fsbep N Drxs Et D Stspg Length machine (mm) 860 Width total (mm) 1020 Width machine (mm) 684 Height (mm) 1712

Condition: good (used), Functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Fpob Et Dsvtxmwe Stjg

Year of construction: 2025, Condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces Fpobop Sr Anj Et D Stog In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Feed opening option of M version (mm) 295 x 300

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 8.9 kW (12.10 HP), Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Fsb Et Dsvrubho Stepg

Year of construction: 2025, Condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: Fpeb Etjp Sr Iaj D Stjg The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 600 Drive (kW) 11 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 1450 Feed opening (mm) 380 x 600 Feed opening option of M version (mm) 295 x 600

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 9.5 kW (12.92 HP), Labotek dryer Type: DDM 120-S Power: 9.5 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Fpob Et D Sjvrubbjteg Power: 0.5 kW

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 250 Fpob Et Dep N Dtre Stjg Rotor width (mm) 600 Drive capacity (hp) 20 Rotor blades (pieces) 3 x 1 Stator knives (rows) 2 Hopper opening (mm) 340 x 600 Total length (mm) 1348 Length machine (mm) 1000 Width total (mm) 1165 Width machine (mm) 834 Height (mm) 1712

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 250 Rotor width (mm) 300 Drive capacity (hp) 10 Rotor knives (pieces) 3 x 1 Stator knives (rows) 2 Chuck opening (mm) 340 x 300 Total length (mm) 1207 Length machine (mm) 860 Fpob Et D Sep N Dqtotjg Width total (mm) 870 Width machine (mm) 440 Height (mm) 1712

Year of construction: 2025, Condition: new, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Feb Et D Sen Hqv Dotopg Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 800 Rotor speed (rpm) 150 Drive capacity (kW) 18.5 Rotor knives (pcs) 66 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 1100

Condition: new, Year of construction: 2024, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding 98T8Mrx Fjb Etet Aagae D Stjpg Optional rear panel with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Year of construction: 2025, Condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one Fob Et D Sop N D Sbotopg stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 700 Drive capacity (HP) 75 Rotor knives (pieces) 5 x 2 Stator knives (rows) 2 + 1 Hopper opening (mm) 700 x 650 Total length (mm) 2300 Length machine (mm) 2200 Width total (mm) 1600 Width machine (mm) 1060 Height (mm) 3509

Year of construction: 2025, Condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand Fob Etep N D N Sj D Stjpg the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 400 Rotor width (mm) 600 Drive capacity (HP) 50 Rotor knives (pieces) 5 x 2 stator knives (rows) 2 + 1 Hopper opening (mm) 630 x 600 Total length (mm) 1950 Length machine (mm) 1876 Width total (mm) 1359 Width machine (mm) 1000 Height (mm) 3040

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 400 Rotor width (mm) 1000 Fob Et D Sop N Dv Hstjpg Drive capacity (hp) 40 Rotor blades (pieces) 3(5) x 1 Stator knives (rows) 2 Hopper opening (mm) 490 x 990 Total length (mm) 1348 Length machine (mm) 1120 Width total (mm) 1577 Width machine (mm) 1216 Height (mm) 1914

Year of construction: 2025, Condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one Fjb Etsp N D Tyo D Stepg stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 1000 Drive capacity (HP) 100 Rotor knives (pieces) 5 x 2 stator knives (rows) 2 + 1 Hopper opening (mm) 1000 x 650 Total length (mm) 2310 Length machine (mm) 2200 Width total (mm) 1800 Width machine (mm) 1330 Height (mm) 3770

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 3,300 kg, rotor diameter: 400 mm, number of blades: 6, rotor length: 600 mm, rotor width: 400 mm, power: 22 kW (29.91 HP), filling opening width: 490 mm, filling opening length: 590 mm, warranty duration: 12 months, input voltage: 400 V, The compact inline granulators in the GST series are suitable for use in injection molding and blow molding plants. They are suitable for recycling voluminous parts such as bottles, canisters, crates, sprues and injection molded parts. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the GST series the perfect solution for inline shredding. All machines in the GST series have a compact, sound-insulated machine housing and a sound-insulated hopper. The feed hopper can be opened and closed by means of a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and in rotor widths from 300 to 1000 mm. The smaller machines have an open F-rotor, the larger machines are equipped with the heavier S-rotors. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. Thanks to the modular design of the granulator, it can be easily expanded with additional options such as replaceable wear plates. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce downtime during maintenance. The setting gauge is included in the scope of delivery. The control cabinet is permanently mounted on the outside of the noise protection box, the complete cabling is inside the machine. Rotor diameter (mm) 400 Rotor width (mm) 600 Drive (kW) 22 Rotor blades (rows) 3 x 2 Stator knives (rows) 2 Screen perforation (mm) > 6 Cutter housing (mm x mm) 400 x 600 Fjb Et D Ssvgncuetopg Weight (approx. kg) 3300

Year of construction: 2025, Condition: new, GSL - Slow speed granulator GSL 300 Rotor diameter (mm) 300 Rotor width (mm) 600 Rotor speed (rpm) 150 Drive capacity (kW) 11 Rotor knives (pcs) 48 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 950 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Customizable hopper and base frame The slow speed granulators in the GSL 300 range feature a staggered 300 mm diameter rotor with widths ranging from 400 to 800 mm. The rotor is directly driven by a geared motor. The low rotor speed reduces the noise level of the machine and creates less dust while grinding. The special design knives of the GSL series can be sharpened easily and do not need adjustment afterwards. The material is fed via a sound absorbing feed hopper that can be tailored to fit various applications and feeding ways. Depending on the requirements the machines can be fitted with a wide variety of hoppers, they are mounted on either low or high level base frames with matching suction bins or bag filling adapters. Quick snap fasteners and hand screws make access to the machine for cleaning and maintenance fast and easy. Applications The GSL slow speed granulators of the 300 series are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. But they can be used as low noise central granulators for small throughput requirements as well. Fpeb Esi Hpf Njt D Steg The stronger design of the 300 series GSLs allow them to be used for stronger and thicker materials while offering the same advantages regarding low noise and dust as the smaller GSL machines. All GSL models can be equipped with a built in blower system in case a vacuum loading system is not available, or to transport the ground material to bags for storage.

Condition: new, Year of construction: 2025, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Feb Et D Set Aam Hetepg Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.