Condition: excellent (used), Length of the carriage 200 cm Scorer Adjustment of the saw height and angle manually set Dcolimcev S D Iwsy Uog Length of the fence 100 cm Motor 4 KW 400 V Year of production 2023

Condition: used, Year of construction: 2013, - Used machine - Year of manufacture: 2013 Dolimcsv Iav Nsy Uscg - Cutting length: 4300 mm - Cutting height: 2105 mm - Cutting depth: 60 mm - Motor power: 4.0 kW / 400 V - LxWxH: 5720 x 1100 x 2865 mm - from site

Condition: used, Year of construction: 2024, machine/vehicle number: L24100210, Neue Ausstellungsmaschine! Besonders schwere Ausführung mit hohem Eigengewicht für maximale Laufruhe • Besonders ruhiger und präziser Lauf dank verwindungssteifem Maschinengehäuse • Großer Guss-Parallelanschlag mit Rundstangenführung, leicht verschiebbar • Guss-Schwungräder mit Gummibelag und Reinigungsbürste •Großer Grauguss-Sägetisch, schwenkbar mit geschliffener und polierter Oberfläche Dcslimcyjwggako Ujg • Präzise Schnitthöhenverstellung über Zahnstange mit Millimeterskala • Endschaltergesicherte Türen • Selbstbremsender Motor • Zwei Absaugstutzen Techn. Daten: Abmessungen Tisch (L x B x H) 720 x 520 x 860 mm Schnittgeschwindigkeit 1.650 m/min Gewicht ca. 240 kg Schnitthöhe max. 350 mm Schnittbreite max. 520 mm Sägeblattlänge max. 4.260 mm Sägeblattstärke min./max. 0,5 / 0,6 mm Präzisionsführung oben / unten Sägetischneigung 0 - 20 ° Abmessungen (L x B x H) 870x 620 x 1970 mm

Condition: used, Year of construction: 2003, Cutting length: 4.350 mm Dcolewalc Deimcy Usg Number of grippers: 9 Feedrate max: 120 m/min Continuously variable feed: Yes Saw blade projection: 98 mm Saw blade diameter max: 355 mm Main motor power: 15 kW Scoring saw: Yes Labelling: manually For sensible workpieces: Clamping pressure adjustable Stop side: Left Side alignment: Yes Control: SCHELLING MCS F Conformity marking: CE mark Total connection: 21 kW

Condition: used, Year of construction: 1993, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1993 Machine no. 93-2-88 GS-tested GS-tested for wood dust Heavy-duty motor: 7.5 kW Carriage length: approx. 2800 mm Cutting width: approx. 1250 mm Max. blade diameter: 450 mm Pivoting angle: up to 45° Tabletop extension: approx. 840 mm Height adjustment: hydraulic Pivoting adjustment: hydraulic Miter stop Djlimcyswf Ephe Uecg Extraction connection: diameter 120 mm / 80 mm Space requirement: approx. 2800 mm x 1900 mm x 1400 mm Total connected load: approx. 7.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 2018, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut indicator: scale Dslewawnrjimcy Uecg Vertical cut indicator: scale Sawblade diameter: 300 mm Swivel material support: yes Sawblade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, - New machine offer - Pneumatic saw blade feed Motor power 7.5 KW Cross section max. 280 x 135 mm, Delimcyou Nykte Uocg or 360 x 55 mm complete with: * 1 mtr. work table to the left and right of the saw blade * beveled plate behind saw cut for removal of trimming cuts trimming cuts * 2-hand operating device * Front saw blade guard * Carbide saw blade diam. 500 mm * Fixed front guard (no protective grid) Further options on request

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 99950384, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting depth: 80 mm, total height: 2,900 mm, total length: 6,400 mm, total width: 1,600 mm, input frequency: 50 Hz, saw blade bore: 30 mm, overall weight: 1,065 kg, power: 5.52 kW (7.51 HP), Further technical data: Motor voltage: 3x 400V (50Hz) Vertical cutting height: 2100 mm Dolsvn Nl Teimcy Uocg Extraction nozzle: 100 mm

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) Dcsljiz Aufoimcy Uog 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 For large cutting lengths e.g. in kitchen construction or for floorboards Small footprint and versatile Quick changeover between double miter cuts or cutting to length Robust swivel arm made of cast iron with exchangeable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit can be swiveled 45 degrees on both sides Motor with mechanical brake Aluminium fence as standard Roller conveyors with one meter length for both sides available as accessories Technical data x Dimensions and weights length approx. 2110 mm width/depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Connection suction: Suction nozzle-Ø saw blade guard 60 mm Electrical data: Supply voltage 400 V Mains frequency 50 Hz Power drive motor 4 kW Sliding carriage and table: Table length 2060 mm Table width 1320 mm Noise emission Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular saw unit saw blade tilt -45° 45° Swivel angle saw arm -45° 45° Max. Cutting height 45° 570 x 120 mm Max. Cutting height -45° 470 x 120 mm Max. Cross section 900 x 20 / 855 x 80 mm Max. Cutting height 0°/45° 120 / 83 mm Diameter saw blade 400 mm Diameter saw blade bore 30 mm Speed saw blade 2800 min¯¹ Location: Solingen Availability: n. Absprache Djlekwhm Roimcy Uocg

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Delimcovyurisy Uscg

Condition: used, Year of construction: 2014, Carriage length: 3000 mm Cutting width at the width stop: 1000 mm Dcolimcswawnley Uog Cutting width at the crosscut stop: 3200 mm Cutting depth: 154 mm Scoring unit: yes Sawblade height adjustment: electric / position control Sawblade pivot adjustment: electric / position control Width stop adjustment: electric / position control Crosscut stop adjustment: manual Sawblade angle display: digital display Cutting height display: digital display Width stop display: digital display Crosscut ruler display: scale Crosscut ruler with miter function: yes Sawblade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2003, Functionality: fully functional, Saw blade diameter 500 mm Saw blade motor power 4.0 kW ATTENTION: No motor brake Roller conveyors: 1 m to the left of the saw blade 2 m to the right of the saw blade Roller diameter 60 mm Usable width approx. 590 mm 2 manually adjustable folding stops Scale rubbed off and difficult to read Djljuglvteimcy Uocg Emergency stop switch in the operating area Working height approx. 760 mm Connected loads: 400 V 3Ph, 50 Hz Suction connection diameter: 100 mm Optional: Renewal of the dimension scale

Condition: used, Year of construction: 1994, Automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum throughput width: 1000 mm Maximum cutting height: 120 mm 2-rail variable Combi measurement with S-conveyor with cross-cut saw Delimewdux Aecy Uscg with Esterer ARS TR infeed with 2-blade chip separator New saw shaft, new bearings, and new chains 3 years ago. Has already been dismantled and is ready for loading at any time. Location: Austria, near Leoben

Condition: new, Year of construction: 2024, Max. cutting thickness 120 mm Max. cutting width 300 mm Distance from column to center of chain 360 mm Min. working length 500 mm Dceliov Duw Hjmcy Ujg Max. disc diameter 350 mm Min. disc diameter 250 mm Disc bore 70 mm Dia. 50 mm spindle Spindle speed 3800 rpm Spindle motor power 37 kW (optional 22kW) Variable feed speed 7.5-30 M/min 2 HP feed motor Table size (LxW) 1530mm x 760mm Package size (LxWxH) 1880x1700x1700 mm Net weight 2050 kg Gross weight 2300 kg A specially designed workpiece clamping system allows you to adjust the cutting thickness depending on your needs. Anti-kickback safety system ensures maximum operator safety The use of high-quality cast iron allows for smooth feed of the workpiece even at high speeds. A specially designed central lubrication system with a warning light in case of insufficient lubrication and automatic machine stop A safety system against machine overload. Once the permissible current is exceeded, the engine will automatically turn off, preventing damage to the machine or cutting tools.

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power Dcjlimsmrxznjcy Usg 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: new, - NEW -DESCRIPTION- Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel- Cast iron saw table with precisely ground and polished surface- Convenient laser device for cutting line marking- Quick saw blade tensioning via eccentric lever on the rear of the machine- Two speeds as standard- Precise 3-roller saw blade guides, as standard at the top and bottom- Quick cutting height adjustment via rotary knob and toothed rack with millimeter scale- Smooth-running aluminum parallel fence with quick eccentric clamping and magnifying glass- Angle fence as standard, adjustable by 60° on both sides- Safety switch for automatic switch-off when the door is openedTECHNICAL DATADimensions and weights- Length (product) approx.1020mm- Width/depth (product) approx.850mm- Height (product) approx.1982mmSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 535mm- Work table width 535mm- Work table height 945mm- Work table length max.685mm- Worktable extension length 535mm- Worktable extension width 150mm- Worktable inclination-10 - 45°- Explanation of worktable inclinationFor safety reasons, a holding device/stop must be fitted from 20° to prevent the wood from slipping!Electrical data- Supply voltage 400V- Mains frequency 50Hz- Output power 2.25kWCutting ranges- Cutting height max. 90°270mm- Cutting width max. with stop 474mm- Cutting width max. without stop 514mmSaw blade- Saw blade speed(s) 850 / 430m/min- Flywheel diameter 530mm- Saw blade length 3865mm- Saw blade length 3865mm- Saw blade length max.3872mm- Saw blade guidePrecision guide top and bottomSCOPE OF SUPPLY- Angle stop ±60°- Laser device for cutting line markingItem number: 5155303 Dolievxr Nvomcy Uecg

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: manual Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Doljh Uch Djimcy Uscg Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm At 80° 200x35 mm, 50x63 mm Dcjlov Aub Noimcy Ujg Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Condition: new, Year of construction: 2024, Cross-cut saw, optimizer STOMAN S500 Infeed table 2000 mm Receiving table 2000 mm Pneumatic stops 2 pcs Blade diameter ø500 mm The thickness of the dial is 4.2 mm Dslolk Dy Hoimcy Uscg Shaft diameter ø35 mm Shaft rotation 2800 rpm Diameter of the upper extraction spigot ø100 mm Diameter of the bottom extraction spigot ø120 mm Motor power 5.5 kW Compressed air pressure 6.0 - 8.0 bar Overall dimensions: L x W x H 4530 x 900 x 1300 mm Working table height 900 mm Weight approx. 200 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Djlju Dru Toimcy Uecg Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 2024, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: no Saw blade diameter: 420 mm speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Machine length: Dslioiixxnjmcy Uscg Machine width: Weight: 110kg

Condition: new, Year of construction: 2024, Functionality: fully functional, NEW MACHINE - READY FOR DEMONSTRATION IN STOCK Aluminum arm Unit runs on linear guide rails Constant zero point even when the cutting angle is changed Automatic pneumatic opening of the saw blade guard Return spring for return of the saw unit in idle position Support table equipped with exchangeable MDF sacrificial plate Complete operation of the machine from the front Motor 400/3/50 PS.5,5 (kW 4) Total weight 320 kg Machine complete with: with: Carbide saw blade Ø 500 mm F=30 Motor speed 2800 rpm Horizontal tilting +60 / 0° /-45° Vertical tilting 0° +45° Horizontal tilting pneumatically locked Dust extraction nozzle 150 mm Djlimeu Rafaocy Uecg Cutting width with horizontal swivel: at 90°: 600 mm. at 60° rotation: 300 mm. at 45° rotation: 420 mm. Cutting height with vertical swivel at 0°: 175 mm. at 15°: 130 mm. at 45° - bevel: 100 mm. Further options on request

Condition: new, Year of construction: 2024, TECHNICAL DETAILS: -Max. length of horizontal cut :mm 4200 -Max. length of vertical cut :mm 4200 -Max. height of cut :mm 2200 -Max. height of horizontal cut :mm 2080 -Max. depth of cut :mm 60 -Motor output :HP 5 (3.7 KW) -Blade diameter :mm 250 -Blade speed :rpm 5300 -Manual shifting frame, with visual reminders. -N° 4 positioners for horizontal cuttings. -N°1 Stop for vertical cuttings. -Short piece cutting device (L. 2340 mm), to support small panels. -Lift-up Rollers. Djlioq Rvymsmcy Uocg -SELF-BRAKING motor. -V.400/3/50Hz. - pre-arranged for independent dust extraction -All standard accessories: safety device, soundproofing, set service tools, user’s manual. Optionel (not included in the price) Electronic Vertical measuring display Euro 1000,00 Optionel (not included in the price) Electronic Horizontal measuring display Euro 1000,00 ( not installed on the machine )

Condition: new, Year of construction: 2024, - NEW MACHINE OFFER - Cutting of fixed lengths according to cutting list and cutting out of defects Cutting cycle: Capping of imperfections by chalk marking Cutting with fixed lengths, Standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 lower infeed rollers 1 loading table 2 mt. Right with double marking table 1 pc. Outfeed table 1 mtr. with rear stop Height of rollers adjusted manually 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: 7" color touchscreen Dcjlou Nhcqjimcy Ueg Editing of cutting cycles directly on the machine Programming variants: - Defect caps through marking - Working with cutting list consists of 10 dimensions, repetition option for each dimension each dimension and total number of pieces for each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with no. 1 ejection kicker (ejection kicker optional) Technical features: Feed system motorized adjustment brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. Carbide blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Minimum bar width mm.40 min. Workpiece thickness 15 mm Further options on request