Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free Nlsdpfsyyzxhex Ab Ueg We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks Njdpozy Sd Eofx Ab Uolg - Operatorâ??s manual

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, cutting height (max.): 360 mm, cutting width (max.): 500 mm, Equipment: CE marking, FOR SALE: PEGAS 360x500 SHI-LR – Semi-Automatic Band Saw for Professional Use For sale: High-performance, heavy-duty PEGAS 360x500 SHI-LR band saw designed for demanding metalworking applications. This machine offers an impressive cutting capacity and an efficient semi-automatic operation cycle. KEY FEATURES • Semi-Automatic Cycle: After manual adjustment of the vices, hydraulic clamping, cutting, and frame return are performed automatically according to user-defined parameters. • High Capacity: Capable of cutting round stock up to 360 mm and rectangular profiles up to 500 x 360 mm. • Versatile Mitre Cutting: The saw arm swivels to both sides (left/right) with precise mitre angles of 45° and 60°. • Infinitely Variable Speed Control: Blade speed is steplessly adjustable from 20–100 m/min, providing optimum cutting settings for various materials. TECHNICAL DATA • Blade Dimensions: 4780 x 34 x 1.1 mm • Drive Power: 3.0 kW (total power input 7.7 kW) • Controls: Hydraulic frame feed and vice clamping, manual material feed and blade tensioning. • Coolant & Cleaning: Equipped with an integrated coolant pump (0.44 kW) and a pulley-driven cleaning brush, maximizing blade lifespan. Nlodpfx Aey Rvcpjb Ueg • Dimensions: Length: 2873 mm Width: 1080 mm Weight: 715 kg • Table Height: 812 mm CUTTING CAPACITY (mm) Angle Round (D) Rectangular (a x b) 0° 360 mm 500 x 360 mm 45° 360 mm 440 x 240 mm 60° 300 mm 290 x 280 mm STANDARD ACCESSORIES INCLUDED • Band saw blade • Set of service spanners • Operating instructions (on CD) This saw is a robust and reliable solution for any workshop looking for precision and heavy-duty cutting performance. Built with durability and ease of maintenance in mind.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm Nsdpfx Asz Dth Rob Uelg

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 28,00,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm • Blade bore: 32 mm Nlsdpfx Aoyhfm Dob Uog • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: not inspected (used), Year of construction: 1999, cutting width (max.): 360 mm, overall weight: 2,500 kg, cutting capacity, maximum diameter 360 mm roller tables chip conveyor weight 2500 kg Nodpozbrnbsfx Ab Uelg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, V = continuously variable, doors are safety-locked; belt guide rollers in very good condition, overhang 500 mm, emergency stop. Nlodpfx Asz A H Hksb Usg

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle Nljdpfxezrmk Ro Ab Uog at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: good (used), Year of construction: 2002, Bandsaw – Automatic Jaespa Compact 2 Year of manufacture: 2002 Internal machine no. 50 - High-performance bandsaw automatic, heavy-duty, hydraulic production bandsaw - Parallel sawing feed system in profile guide rails - Mitsubishi NC program control E1032 for preselection of 90 programs, each with a specific quantity and corresponding Nodpjylwawofx Ab Uelg section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw spindle, 950 mm stroke, any desired section length from 3 mm to 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening on both sides - Material clamping with double clamping device in front of and behind the saw blade - Remaining piece length in automatic operation: 90 mm - Max. section length in automatic operation: unlimited - Material support height 850 mm - Incl. 6 meter roller conveyor - Coolant tank 50 l

Condition: used, Year of construction: 1991, machine/vehicle number: 1430 91, Technical data Cutting diameter: 260 mm Saw band length: 3660 mm Cutting width: 0.9 mm Cutting range - square - 260 x 260 mm Feed length: 500 mm Feed length: multiple 5,999 mm Cutting speed: 17 - 106 m/min Saw blade dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Machine weight approx. 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories Coolant Information according to manufacturer Nlodjw Eua Aepfx Ab Uog

Condition: used, Year of construction: 2007, machine/vehicle number: 0003000421, functionality: unexamined, AUTOMATIC BAND SAW Njdpfxey Ndnwe Ab Uslg

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 5780515, functionality: fully functional, Metora VMB280 hacksaw with automatic feed • Cutting capacity: up to 280 mm • Cutting angle: 90° and adjustable up to 45° • Automatic feed: adjustable, hydraulic feed for consistent cutting quality Njdexxxubopfx Ab Uslg • Motor power: 1.5 kW • Cutting speed: 20 - 100 m/min (steplessly adjustable) • Weight: approx. 800 kg • Includes roller conveyor for 3 meters • Saw blade installed

Condition: excellent (used), Year of construction: 2017, cutting diameter 350 mm saw band length 4780 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 340 mm capacity 45 degrees: round + 350 mm capacity 45 degrees: flat + 380 x 340 mm capacity 60 degrees: round 230 mm capacity 60 degrees: flat 220 x 340 mm capacity 45 degrees: round - 350 mm capacity 45 degrees: flat - 220 x 340 mm coolant capacity ca. 100 l band speed 20 - 100 m/min Control SIEMENS voltage 3x 400 V total power requirement 3.0 kW AC weight 2150 kg range L-W-H 3030 x 3150 x 2000 mm In very good condition Demo machine from the manufacturer PEGAS With a wide range of special features Original price about 60.000 euros Special price upon request - in checked conditions - machinevideo - ?v=dv_wXIT9BaQ Features: - Robust, highly efficient electro-hydraulic miter band saw * Fully automatic (INDUSTRIAL) = with automatic material feed * Model: Two-column band saw * Maximum stability and vibration damping during cutting * Powerful saw band drive with a 3.0 kW motor - Material feed unit with ball screws * "Longstep feed gripper" for a maximum feed length of 1.000 mm - Includes SIEMENS PLC control unit * Selectable semi-automatic or fully automatic cycle * 200 programs, each with 99 programmable cut lengths and quantities * When the remaining length is 500 mm, the machine interrupts the sawing cycle * Protection against damage or jamming of the material - For angles from 0° to 60°, with a ball-bearing rotary table * Programmable CNC adjustment of the miter angle Nlodpfxszqgf Se Ab Usg * Right (0° to 60°) and left (0° to 45°) * Stepless adjustment of the miter angle * Adjustment via a robust gear train - Saw blade guides made of carbide plates - Saw feed infinitely adjustable via a fine-adjustment knob - Sturdy machine bed and torsion-resistant saw frame - Infinitely variable speed adjustment of the saw blade - Coolant system - Operating instructions for the machine and control system

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: Nljdpfxezvhkmj Ab Ujg - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm Nsdpjy Ani Ejfx Ab Uolg - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 Nsdszzcwxspfx Ab Ujlg • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 20 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 90 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 2,030 mm, total width: 3,700 mm, overall weight: 3,235 kg, table height: 800 mm, year of last overhaul: 2026, saw blade length: 6,200 mm, saw blade width: 41 mm, type of cooling: water, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC Automatic Two-Column Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 550 mm Maximum cutting capacity (rectangular): 550 × 520 mm Straight cutting (0°) Fully automatic CNC operation Variable blade speed: 20–120 m/min Main motor power: 5.5 kW Saw blade dimensions: 6200 × 41 × 1.3 mm Automatic hydraulic material clamping Automatic servo-driven material feeder Mitsubishi PLC control with colour touch-screen Hydraulic blade tensioning Automatic blade load control Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 3,700 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is a unique opportunity to purchase a manufacturer-maintained demonstration machine with a full service history and immediate spare parts support. Built for High-Volume Industrial Production The PEGAS 540 CALIBER A-CNC is a highly productive, fully automatic two-column band saw designed for demanding industrial applications and continuous production. It is engineered for straight cutting of solid bars, tubes, profiles and bundles made of carbon steel, stainless steel, tool steel and other metallic materials. Its rigid construction and advanced CNC control ensure maximum productivity, outstanding cutting accuracy and long-term reliability. The machine features a servo-controlled automatic material feeder with programmable cutting cycles. The Mitsubishi PLC control system with a colour touch-screen allows the operator to store up to 100 cutting programs, each with multiple cutting lengths and quantities, making it ideal for serial production. Automatic positioning, material feeding and cutting significantly reduce setup time and increase production efficiency. The robust two-column design minimizes vibration during cutting and provides exceptional rigidity. The continuously variable blade speed, hydraulic blade tensioning and automatic blade load control optimize cutting performance while extending blade life. The machine is also equipped with automatic coolant delivery, powered blade cleaning and a fully enclosed guarding system for maximum operator safety and reliable operation in demanding production environments. Nodpfx Abszhm Uzo Uelg Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional technical information.

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 125 mm Njdpfjz Ek Azsx Ab Ujlg capacity 90 degrees: flat 170 x 125 mm capacity 45 degrees: round 122 mm capacity 45 degrees: square 120 mm turning speeds 3000 U/min engine output 2,2 kW weight of the machine ca. 95 Kg dimensions 0,8 x 0,6 x 1,5 m Aluminum circular saw - Pneumatic workpiece clamping system - Micro-spray system

Condition: used, functionality: fully functional, Used MANUAL SAW, BIANCO 370 M. OVERHAULED and REPAINTED. Nljdezhuptspfx Ab Ueg

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Nedpfx Aoy E Iypeb Uolg Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm NEW PRICE: €390,000

Condition: good (used), Year of construction: 1985, functionality: fully functional, Type: HBS 1 Saw blade length: 400 mm Power: 0.53 / 0.78 kW Nlsdpfjzy R U Nox Ab Ujg Cutting speed approx.: 15 / 30 m/min Vice opening width: 190 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Njdpfx Asy Httdsb Uelg Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: good (used), functionality: fully functional, power: 1 kW (1.36 HP), input voltage: 400 V, total height: 2,000 mm, total length: 1,600 mm, total width: 700 mm, overall weight: 1,000 kg, For sale: a THIEL 19 metal band saw. Year of manufacture unknown. Fully functional, including saw blades. Table dimensions: 750 x 650 mm Saw blade length: min. 3425 mm / max. 3725 mm Dimensions & Weight: Dimensions (L x W x H): 1600 x 700 x 2000 mm Nljdpjzxptnefx Ab Usg Weight: approx. 1000 kg The machine can be inspected and tested at our location in Chemnitz.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 0053003064, functionality: fully functional, Fully operational, robust BIANCO 370 A machine (2007) – ready for immediate use. On-site testing available, complete nameplate data, quick collection possible. For sale: industrial BIANCO machine, model 370 A, year of manufacture 2007, serial number 0053003064. The unit comes from regular factory operation and was used as intended. The sale is due to an upgrade of the machinery fleet. The machine is in very good condition. It can be started and tested on site (under power) – the buyer can observe the machine in operation and assess its condition before purchase. Nsdpfx Abex Tfugo Uolg Nameplate data Manufacturer / model: BIANCO 370 A Year of manufacture: 2007 Serial number (MATR.): 0053003064 Power: 2.83 kW Supply voltage: 380/415 V, 50 Hz (current: 7.3 A) CE marking – compliant with machinery regulations solid construction and simple operation stable performance and repeatability easy maintenance and access to standard wear parts an excellent base for continued use in production or workshop environments

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm Nedpfx Abszwv Nte Uolg * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.