Used profile bending machines - intake diameter 31-50mm for sale (61)

Condition: new, - Shaft diameter 50 mm - The upper roller is hydraulically moved - Three rollers are driven - Digital display - Can be used horizontally/vertically - Foot switch Njdpfsgg N Twsx Adwocl - Emergency stop - Documentation - 400 V

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Ncsdpjx Anpvsfx Adwel Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nedpfxed Ab H Se Adwjcl  HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls* Njded Eqqwspfx Adwjcl         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg Nsdpfx Adewnia Aewocl - Documentation available: No - CE certificate present: No - Shaft diameter [mm]: 50 - Capacity diameter round [mm]: 50 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display Nsdper Ar Hvjfx Adwecl - Can be used horizontally/vertically - Foot control - Emergency stop - Documentation - 400 V

Condition: new, Year of construction: 2025, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise - Suitable for horizontal/vertical use - Foot control - Emergency stop Ncedpfowv Ufaex Adwol - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, shaft diameter: 50 mm, bending force (max.): 10 t, travel distance X-axis: 200 mm, shaft length: 200 mm, TECHNICAL DETAILS Maximum torque per roll: max. 2,500 Nm Ncjdpfexw Sl Rjx Adwjl Bending force: 10 t X-axis travel: 200 mm Shaft diameter: 50 mm Shaft length: 200 mm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 1,730 mm x 1,600 mm x 1,520 mm Weight: 1,800 kg Transport packages: 2

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm Ncodpfsx A Ivijx Adwel 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm

Condition: excellent (used), Pipe and profile bending machine TAURING SAF BS50 Number of rollers: 3 Feed speed: 3 m/min Motor power: 2.2 kW Ncodpfx Adjxcn Hnewel

Condition: used, functionality: fully functional, Year of construction: 2021, shaft diameter: 60 mm, overall weight: 970 kg, total length: 1,400 mm, total width: 950 mm, total height: 1,450 mm, power: 4 kW (5.44 HP), type of input current: three-phase, Akyapak APK 61 is a high durability machine designed for pipe and profile bending operations. With its ST-52 steel construction and powerful motor, it provides precise and efficient bending of various metal profiles. Technical Specifications: Number of Cylinders: 3 Shaft Diameter: 60 mm Bending Speed: 6.4 m/min Motor Power: 4 kW Machine Weight: 970 kg Dimensions (LxWxH): 1400 x 950 x 1450 mm Featured Features: Structure: Robust and reliable design with ST-52 steel construction. Drive System: Driven rotation system with hydromotor and gears minimizes the risk of material slippage. Ncedpfx Adov Hckmowel Roll Shafts: Hardened, ground and special steel made roll shafts. Control Panel: Ease of use with a movable control panel separate from the machine. Working Position: Horizontal and vertical working capability. Certificates: CE, ISO 9001-2008, TSEK and TURQUM certificates and registered production quality. Standard Accessories: A set of standard rolls. Digital display for lower rolls. Manual lubrication system. Side supports that can be manually adjusted in one direction.

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm Nodpfx Adodkxiyewocl - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: new, Year of construction: 2025, Ring bending machine roll Ncedegg Nu Uopfx Adwjl

Year of construction: 2021, condition: new, AYEL-TECH PROFILE ROLLER Ncjdpfx Adogg Rcfowsl TYPE PK 40 - Axle diameter 40 mm - Horizontal/vertical use - Foot-operated - Emergency stop - With 1 set standard steel rollers - With 1 set of plastic rollers for pipe - Documentation - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, - Shank diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control Nedpfxshyc Rxj Adwecl - Emergency stop - Documentation - 400V

Condition: new, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - With 1 set of standard steel rollers Ncjdolxw Rmspfx Adwsl - Documentation - 400V

Condition: good (used), ZOPF ZB 70/2 H – Ring Bending Machine / Profile Bending Machine Ncsdjxw Np Tepfx Adwsl Manufacturer: ZOPF GmbH Model: ZB 70/2 H Serial number: 5710276 Year of manufacture: 2005 Category: Ring Bending Machine / Profile Bending Machine Location: Germany Technical Specifications Power supply: 400 V / 50 Hz Motor power: 2.2 kW Current: 6.5 A Number of driven rolls: 2 Top roll adjustment: Hydraulic (H version) Roll speed: 8.5 rpm (max.) Speed control: rotational speed adjustable via potentiometer Mechanical Specifications Shaft diameter of rolls: approx. 40 mm Roll/bending roll diameter: approx. 152 / 162 mm Hydraulic pressure force: approx. 80 kN Adjustment travel of top roll: approx. 120 mm Working position: suitable for both horizontal and vertical operation Construction: welded steel frame, conical roller bearings, interchangeable slideways Bending Capacity (indicative) Round tube: up to approx. Ø 70 × 2 mm Solid round: approx. Ø 35 mm Angle profile: approx. 50 × 50 × 6 mm Dimensions and Weight Machine weight: approx. 470 kg Dimensions: 800 mm wide x 900 mm deep x 1200 mm high Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you verify all relevant details independently. Financial Information VAT/margin: VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: new, Year of construction: 2024, rotational speed (max.): 50 rpm, - Ring bending machine – Shaft diameter 50 mm – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control – Emergency stop – Documentation – 400 V Nodslp Ryhepfx Adwscl

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) Nodpfopxmausx Adwecl - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Roll speed: 26 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg Ncodpfxoxbtxyj Adwel

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller Ncjdpfxjgh T Hro Adwol - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: 070A-633, shaft diameter: 70 mm, roller diameter: 245 mm, rotational speed (min.): 8 rpm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, Equipment: documentation/manual, emergency stop, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated reversible, can work with shafts vertical /horizontal Tooling: Nsdpfx Adewkrpfowscl -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Nsdpecf D Rbofx Adwjcl Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: good (used), Year of construction: 1999, Manufacturer: Tauring Type: DELTA 50 CNC Control: TAURING CNC-S Year of manufacture: 1999 Shaft length 115 mm Max roll diameter 175 mm CNC-C means Computerised Compact Numerical Control. Thanks to the small size offered by the most modern technology and a competitive price it has been possible to obtain a powerful, reliable and suitable product. Tauring bending machines can be equipped with this device, which gives the possibility to realise any shape of regular and irregular geometrical bending. The machine equipped with the CNC-C device executes automatically and in only one pass up to 30 program steps (in the same bar 30 bends of different radius), by simply setting the radius and length in mm of each segment composing the shape. Specifications Metric US Standard Horizontal and Vertical H+V Axis Ø 115 mm Number of rolls 3 Control TAURING CNC-S Dimensions (estimate) Length 1400 mm Width 1400 mm Njdowp Idvjpfx Adwecl Height 1400 mm Weight 780 kg Please note: The information on this page has been obtained to the best of our knowledge and belief by us, and where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent any warranty or contractual terms. We recommend that you check all essential details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, BPR BA 35 CNC Ncedpoxivfxsfx Adwol Three-Roller Ring Bending Machine, Hydraulic AS-NEW CONDITION MACHINE Shaft diameter: 35 mm Roller diameter: mm on request Shafts made of high-strength steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft rotation (variable): 0-30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roller Three powered rollers with smooth surface BPR Probending CNC electronic control system Hydraulic cylinder pressing force: 5,500 kg Working pressure: 190 bar