Used turning automatic lathes for sale (186)

Condition: good (used), Year of construction: 2005, operating hours: 15,938 h, functionality: fully functional, Escomatic New Mac 646 + Year 2005 6 axes 15938 run time hours 4x chuck tools 1 x Cross drill station 3 x Frontal drill stations Bdjdjzx Hucepfx Abteg 1 x Pick up spindle for back burring 3 x Frontal driven back burring stations 2 x radial driven back burring stations 1 x Support of steel bobin 1 x Oil tank 1 x Arm support for coollant on main spindle Machine in good running condition

Condition: excellent (used), Year of construction: 2007, operating hours: 5,314 h, functionality: fully functional, machine/vehicle number: XD-20-BB-0452, spindle motor power: 4,300 W, turning length: 60 mm, spindle speed (max.): 8,000 rpm, turning diameter: 20 mm, spindle bore: 24 mm, overall weight: 3,250 kg, bar passage: 20 mm, total width: 1,490 mm, total length: 2,258 mm, total height: 1,758 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, drilling capacity: 10 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 210 mm, thread cutting capacity: M 10, power of the servo motor: 940 W, counter spindle motor power: 3,800 W, counter spindle speed (max.): 8,000 rpm, Equipment: rotational speed infinitely variable, Hanwha XD20N, year of manufacture 2007 – CNC Swiss-type long-stroke lathe without a guide bush. Compact CNC lathe for series production of smaller, precision parts from bar stock. The machine is equipped with a main spindle, a counter-spindle, and four cross-drilled powered tools, allowing for complete machining of the part from both sides in a single simultaneous cycle. Particularly suitable for short and medium-length parts where a guide bush is not required. Very low operating hours for the machine, considering its year of manufacture: operating hours in automatic mode: 7,454 hours, machining time: 5,314 hours. Bdedpfx Aozw Nt Sebtsg The machine includes various collets and chuck jaws – everything that is installed in the machine, plus additional ones, see photo. Direct sale to the end-user only.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 Bdjdpfxjyrg Aho Abtjg • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Control: Fanuc 31i Model B Includes: Barfeeder FMB Turbo 3-36 Number of axes: 7 Bjdpfx Abezvwlaetsdg Number of spindles: 2 Live tool B-axis Main spindle: Max. bar diameter: 32 mm Travel: 380 mm Spindle speeds: 8000 rpm Spindle power: 7.5 / 10.5 kW Counter spindle: Max. bar diameter: 32 mm Z-axis stroke: 295 mm Spindle speeds: 8000 rpm Spindle power: 3.7 / 5.5 kW Machine footprint: 3000 x 1400 mm Machine height: 1857 mm Machine weight: 4300 kg.

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Bjdpfx Aozxhxvobtodg Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] - Number of tools : 2 - Feed system, standard lever, 2:1 ratio : 24 [mm] - Production with turret indexing : 1.25–31.5 [parts/min] - Production without turret indexing : 1.25 - 63 [parts/min] - Toolholder Spindle Speed : 4000 or 6000 [rpm] - Maximum clamping diameter of the drill chuck : 3 [mm] - Maximum drilling depth : 15 [mm] - Maximum Ø of the counter-gripper : 4 [mm] - Drilling speeds : 3000 / 5000 / 8000 / 12000 [rpm] - Turret indexing time : 0.33 [sec] POWER SUPPLY - Supply voltage : 220 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 680 [mm] - Machine height : 1600 [mm] Bedpfx Aozx Hk Dobtodg - Machine weight : 870 [kg]

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 6.35 [mm] - Feed ratio 1:2 with counter-gripper or revolver : 31 [mm] - 1:1 feed ratio with counter-gripper or revolver : 62 [mm] - Dual feed, 1:1 ratio, counter-clamp only : 124 - Number of speeds/cam cycles : 37 Bedpfszx Hlbjx Abtsdg - Production : 0.8 - 50 [parts/min] - Number of tools : 3 - Maximum tool travel : 4 [mm] - Toolholder Spindle Speed : 2400 / 3800 / 6000 [rpm] - Tool Dimensions : Ø 5 x 34 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1800 x 900 [mm] - Machine weight : 1090 [kg]

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 6.35 [mm] - Feed ratio 1:2 with counter-gripper or revolver : 31 [mm] - 1:1 feed ratio with counter-gripper or revolver : 62 [mm] - Dual feed, 1:1 ratio, counter-clamp only : 124 - Number of speeds/cam cycles : 37 - Production : 0.8 - 50 [parts/min] - Number of tools : 3 - Maximum tool travel : 4 [mm] - Toolholder Spindle Speed : 2400 / 3800 / 6000 [rpm] - Tool Dimensions : Ø 5 x 34 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1800 x 900 [mm] Bedozx Hk Rspfx Abtedg - Machine weight : 1090 [kg]

Condition: used, TECHNICAL DETAILS - Nombre de positions du revolver : 4 - Course max. broches perçage, taraudage, filetage : 32 [mm] - Course max. broche contre-pince : 36 [mm] Bedpfx Abjzx Hlhstjdg - Ø maxi filetage/taraudage laiton : 5 [mm] - Ø maxi filetage/taraudage acier : 4 [mm] - Longueur maxi filetée : l [mm] - Ø maxi serrage broches de perçage : 6 [mm] - Maximum Ø of the counter-gripper : 6.35 [mm] - Maximum workpiece diameter : 6.35 [mm] - Feed ratio 1:2 with counter-gripper or revolver : 31 [mm] - 1:1 feed ratio with counter-gripper or revolver : 62 [mm] - Dual feed, 1:1 ratio, counter-clamp only : 124 - Number of speeds/cam cycles : 37 - Production : 0.8 - 50 [parts/min] - Number of tools : 3 - Maximum tool travel : 4 [mm] - Toolholder Spindle Speed : 2400 / 3800 / 6000 [rpm] - Tool Dimensions : Ø 6 x 34 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1800 x 900 [mm] - Machine weight : 1090 [kg]

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 Bedpfxszuxfro Abtsdg ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 7,000 rpm, bar passage: 32 mm, feed length Z-axis: 320 mm, bar diameter (max.): 32 mm, power: 7 kW (9.52 HP), travel distance Z-axis: 320 mm, For sale: Hanwha STL32-HY CNC lathe (9-axis live tooling, Ø32mm max.) Siemens 840D control panel Bdodpfjytfynjx Abteg Year 2011, machine was retrofitted in 2018 Chip conveyor Numerous accessories/tooling included with the machine Available immediately Machine sold as is, no diagnostics performed. HANWHA/CINCOM/TORNOS/NOMURA/STAR/BIGLIA/TSUGAMI/AUTOMATIC BAR FEEDER/KMX

Condition: used, Year of construction: 2007, functionality: fully functional, STAR MICRONICS ECAS-12 CNC SWISS-TYPE AUTOMATIC LATHE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-12 Type: 570 Year of manufacture: 2007 Serial/Lot number: 0398 (036) Machine type: CNC sliding-headstock / Swiss-type automatic lathe CNC control: Siemens 840Di Number of controlled axes: 10 Main and counter spindle: Yes C-axis on main and counter spindle: Yes TECHNICAL DATA Maximum machining diameter: 13 mm Maximum headstock stroke: 205 mm Maximum stationary drilling diameter: 10 mm Maximum driven-tool drilling diameter: 8 mm Maximum stationary tapping capacity: M8 × P1.25 Bdedpfx Abjzxhz Dotog Maximum driven-tool tapping capacity: M6 × P1.0 Maximum milling diameter: 10 mm Maximum die-cutting capacity: M8 × P1.25 Maximum slotting capacity: 1.5 × 4 mm MAIN SPINDLE Maximum spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Main spindle motor output: Approximately 3.7 kW / 5 hp COUNTER SPINDLE Maximum clamping diameter: 13 mm Maximum counter-spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Counter-spindle motor output: Approximately 3.7 kW / 5 hp Number of counter-spindle tool positions: 4 DRIVEN TOOLING Maximum driven-tool speed: 8,000 rpm Driven-tool motor output: Approximately 0.75 kW / 1 hp Powered cross-working and rear-working tool stations AXES AND FEED RATES Linear axes: X1, Y1, Z1, X2, Z2, X3, Y3 and Z3 Rotary axes: C1 and C2 Maximum rapid traverse on linear axes: 18,000 mm/min Maximum rotary-axis feed: 194,400°/min Minimum programmable linear increment: 0.001 mm Minimum programmable C-axis increment: 0.001° ELECTRICAL DATA Operating voltage: AC 200 V Power supply: Three-phase Frequency: 50/60 Hz Connected load: 8.0 kVA DIMENSIONS AND WEIGHT Approximate machine dimensions: 2,590 × 1,140 × 1,830 mm Machine weight: 3,500 kg Dimensions exclude the bar feeder and peripheral equipment.

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 5 [mm] - Max. part length : 24 - 140 [mm] - Number of tools : 2 WEIGHT & DIMENSIONS - Machine floor space : 1580 x 1100 [mm] - Machine height : 1505 [mm] Bedpfx Ajzx Hkqjbtedg - Machine weight : 760 [kg]

Condition: used, TECHNICAL DETAILS Bjdpjzx Hkwefx Abtjdg - Maximum workpiece diameter : 4 [mm] - Number of tools : 2 - Feed system, standard lever, 2:1 ratio : 24 [mm] - Production with turret indexing : 1.25–31.5 [parts/min] - Production without turret indexing : 1.25 - 63 [parts/min] - Toolholder Spindle Speed : 4000 or 6000 [rpm] - Maximum clamping diameter of the drill chuck : 3 [mm] - Maximum drilling depth : 15 [mm] - Maximum Ø of the counter-gripper : 4 [mm] - Drilling speeds : 3000 / 5000 / 8000 / 12000 [rpm] - Turret indexing time : 0.33 [sec] POWER SUPPLY - Supply voltage : 220 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 680 [mm] - Machine height : 1600 [mm] - Machine weight : 870 [kg]

Condition: used, Year of construction: 2018, operating hours: 22,293 h, functionality: fully functional, machine/vehicle number: A320A/1497, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, overall weight: 2,200 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, working length: 200 mm, input voltage: 200 V, power: 7.1 kW (9.65 HP), travel distance Z-axis: 200 mm, A20-3F7 (2018-02) - with pump We have a used Citizen A20-3F7 machine for sale, manufactured in 2018- Swiss-type automatic lathe Bdjdpfx Abszp Emljteg Maximum workpiece diameter is 20mm, length 200mm (in GB mode). Maximum main spindle speed is 10,000 rpm. Maximum rear spindle speed is 8,000 rpm. The machine includes: - chip conveyor; - workpiece conveyor; - bar feeder; - oil mist extractor; - high-pressure pump (70 bar);

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Bjdjy Udcfjpfx Abtsdg The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC long-turn lathe Manufacturer: STAR Type: SV-32 Year of manufacture: 2007 Equipped with: FANUC 16i-TB control system Back-end machining Bdsdpfxszw Hrrs Abtjg Synchronous spindle Turret Powered tools C-axis High-pressure pump Fire extinguishing system Chip conveyor Bar loader magazine FMB TURBO 3-36

Condition: used, Year of construction: 2018, operating hours: 21,823 h, functionality: fully functional, machine/vehicle number: A320A/1566, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, overall weight: 2,200 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, working length: 330 mm, input voltage: 200 V, power: 7.1 kW (9.65 HP), We offer this used Citizen A20-3F7 turning automatic lathe without pomp, year of construction 2018. Model: A20-3F7 Serial Number: AF6613 Manufacturing Number: A320A/1566 Manufacture Date: 2018-03 Full Load Current: 20.2 A Rated Power: 7.1 kVA Bdodpfx Aszp E Ebobtog Short Circuit Interrupt Rating: 2.5 kA Mass: 2200 kg Input Voltage: AC 200 V, 3-phase, 50/60 Hz Country of Origin: Thailand The maximum workpiece diameter is 20mm and the length is 200mm (in GB mode). The maximum main spindle speed is 10,000 rpm. The maximum rear spindle speed is 8,000 rpm. The machine includes: - chip conveyor; - workpiece conveyor; - bar feeder; - oil mist extractor; - tooling for long workpieces (up to 330mm); If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Z1 axis: 235 mm Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Fuse: 81A Bodpfx Abex Ig Ikstjdg Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC lathe with long turning capability Manufacturer: STAR Bjdpfxezw D Rrj Abtsdg Type: SV-32 Year of manufacture: 2005 Equipped with: FANUC 16i-TB control system Rear-end machining Synchronous spindle Turret Powered tools C-axis High-pressure pump Fire extinguishing system Chip conveyor Bar loader magazine FMB TURBO 5-42

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Bsdpfx Abozqvhvjtjdg

Condition: used, Year of construction: 2013, functionality: fully functional, The Tsugami B0385L is a powerful, CNC-controlled long-bed lathe (Swiss type) with the following special equipment: - Dust extraction system - Fire protection system - Chip conveyor Technical data: - General overhaul 2020 Main and counter spindle • Max. machining diameter: Ø 38 mm • Bar capacity: Ø 8 mm to Ø 38 mm Bsdpezizufefx Abtjdg • Max. turning length: 100 mm (without guide bushing) • Max. turning length with guide bushing: 300 mm • Main spindle speed: 200 – 6,000 min⁻¹ • Counter spindle speed: 200 – 6,000 min⁻¹ • Main spindle motor power: 7.5 / 11 kW • Counter spindle motor power: 3.7 / 5.5 kW Tool holders and axes • Total number of tool positions: 21 (standard) • Driven tools (cross-working): 200 – 5,000 min⁻¹ (power approx. 1.0 to 1.4 kW) • Tool shank size: 20 x 20 mm • Rapid traverse speeds: 32 m/min Control system: Fanuc 0i-TD Machining capacities (maximum values) • Max. drilling diameter (main spindle): Ø 13 mm • Max. threading (main spindle): M12 • Max. drilling diameter (counter spindle): Ø 12 mm • Max. drilling diameter (cross tool): Ø 10 mm Dimensions and weight • Machine dimensions (W x D x H): approx. 2,520–2,770 mm x 1,345–1,515 mm x 1,970–2,050 mm • Weight: approx. 4,600 kg

Condition: used, Year of construction: 1996, turning diameter over bed Ø16 mm mm Bedpfx Asztfw Eobtjdg weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Bdjdpszic Ruofx Abtjg Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel 380 V / 220 V transformer included

Condition: ready for operation (used), Year of construction: 2004, The Maier ML 32 D pro Line with FMB mounting is a highly precise, CNC-controlled CNC long-turn lathe (Swiss-type) for demanding metalworking applications. Bdodpfxsy D Nwae Abtog Technical data: Main and counter spindle • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-working: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-working: Available for simultaneous machining on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters