Used Ball Mill for sale (3,396)

Condition: used, Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg Hnodpedkparjfx Aabou

Condition: ready for operation (used), Ready for use Hnsdpfxewc Eulo Aabou

Condition: reconditioned (used), Year of construction: 2020, pressing force: 50 t, filling opening width: 670 mm, filling opening length: 1,200 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, total height: 800 mm, power: 7.5 kW (10.20 HP), empty load weight: 2,180 kg, input frequency: 50 Hz, Tested and ready for operation, Vertical baler Dixi 50S PET Year of manufacture: 2020 Bale dimensions (L x W x H, mm): 1200 x 800 x 800 - 1100 Hnjdpfxewviz No Aabou Bale weight (kg): approx. 350-500 kg Specifications (L x W x H, mm): 1600 x 1300 x 3100 Loading opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 Volt Press immediately ready for use Net price plus VAT Delivery available at extra charge.

Year of construction: 2025, condition: used, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack Hedpjwk Dv Defx Aabjnu 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: used, Year of construction: 2022,

Condition: used, power converter, power supply, power pack, switching power supply, power supply, switching power supply, power supply -Manufacturer: Balluff, power supply switching power supply -Type: BAE0002 BAE PS-XA-1W-24-100-004 -technical data: see type plates photos -Dimensions: 120/85/H130 mm -Weight: 1.4 kg Hnjdpfxsutuwne Aabsu

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 50 t, filling opening width: 1,200 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, Inspected and ready for use, Orwak 3620 vertical baler, year of manufacture 2014. Bale dimensions (L x W x H mm): 1200 x 800 x 1000 - 1200. Bale weight (kg): approx. 450 kg. Specifications (L x W x H mm): 1900 x 1050 x 1980. Loading opening (mm): 1200 x 600. Pressing force 50 tons. Power supply 400 volts. Baler immediately ready for operation. Net price plus VAT. Delivery possible at extra cost. Hnedpswviupsfx Aabeu

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. Hnodpfx Aasq Nxrxebju 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Hodpfxov Spfzo Aabjnu Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. For more detailed information, please feel free to contact us.

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, input voltage: 220 V, total length: 2,750 mm, total width: 850 mm, total height: 2,000 mm, type of input current: three-phase, overall weight: 500 kg, Almost unused machine. Hsdpfx Aaoxayxkjbsnu

Condition: new, overall weight: 45,000 kg, maximum load weight: 40,230 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete stock of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment list. Complete equipment details upon request. Chassis: Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads. Fifth wheel coupling: 2-inch kingpin (also suitable for 3.5-inch). Underrun protection: According to EU regulations, bolted version. Side underrun protection: According to EU regulations. Landing gears: Single-side operated landing legs (approx. 50 t static), can only be operated when air suspension is deflated and locked. Axles: 3 x 9 t air suspension axle assemblies, SAF brand, with disc brakes approx. 430x45 mm, ABS, centred 10 bolt hub with offset ET 120, total air suspension travel approx. 200 mm, raising approx. 140 mm, lowering approx. 60 mm. Control via rotary lever valve with detent position. Axle lift: First and last axle liftable, with fully automatic, load-dependent lift control. Traction assist via button in the driver’s cab (15-pin socket, PIN12, cab button not included). Brake system: Two-line compressed air brake system in accordance with EU regulation with EBS and RSS, automatic load-dependent control, spring-loaded cylinders as parking brake, swapped-proof coupling heads fixed to the front cross member, no connecting line to the towing vehicle. Brand at our discretion. Tyres: 6 x 385/65 R22.5 160J on 11.75 x 22.5 ET120 rims. Mudguards: According to EU regulations, full PVC mudguards in front of and behind the axle group. Load securing: - 6 pairs of foldable lashing rings, evenly distributed (tensile force approx. 8 t) - Outer frame drilled every approx. 500 mm for lashing straps Stanchion sockets for insertable stakes 80x50: - 5 pairs set into the outer frame - 3 pairs set into the loading floor Insertable stakes: - 10 pieces of galvanized tube approx. 80x50x4 mm Front wall: Bolted corner stanchions filled with aluminum hollow profiles, interior steel impact plate across total width and height. Stake magazine: Inside the front wall, magazine for 20 insertable stakes. Floor: Approx. 28 mm Z-hardwood floor set into outer frame. Lighting: According to EU regulations, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at front, LED outline lights at rear, license plate lights. 1 x 15-pin and 2 x 7-pin sockets at front cross member. Equipment: - 2 wheel chocks with holders Hsdpfx Aaoxpbz Ssbsnu - Warning boards according to ECE 70 - 2 LED work lights on lamp bracket (switched with reverse gear) - Bracket for rotating beacon at rear (incl. beacon) - 2 fixed access ladders at the sides - Steel toolbox in front of front wall, approx. 400 mm high - Smart Board for second ride height control - 2 LED work lights above the STW, switchable - 2 LED work lights at height of landing legs (switched with reverse gear) - 2 LED work lights on lamp bracket (switched with reverse gear) Paintwork: Chassis and front wall sandblasted and given a high-quality final coating. Chassis: hot-dip galvanized + RAL 3002 carmine red Front wall: RAL 3002 carmine red Front wall corner stanchions: hot-dip galvanized Hubs: KTL black Rims: silver Underrun protection: white (RAL 9010) Add-on parts: galvanized/KTL black Please note that due to the size of the chassis and the chosen hot-dip galvanizing process, surface anomalies may occur. This may affect, for example,

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(s), trailer for mobile crane - counterweights/counterweights Hsdpfxevnm Tho Aabsnu Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), axle configuration: > 3 axles, wheelbase: 7,970 mm, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, first registration: 02/2007, suspension: air, color: other, tire size: 275/70-R22.5, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication = Notes = Very nice 2007 NOOTEBOOM OVB-73-04 4-axle ballast trailer, axles 2, 3, and 4 are hydraulically steered (incl. wired remote control), BPW axles with drum brakes, hardwood floor, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication, 3" kingpin, air suspension, unladen weight: 11,400 kg, gross vehicle weight: 71,400 kg, twin wheels with 275/70 -R22.5 tyres (L: 11/8, 7/13, 12/12, 10/12 mm; R: 12/12, 13/12, 12/11, 12/6 mm), Belgian registration with valid technical inspection until 13.02.2026 = Further Information = Axle Configuration Tyre size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tyres; max. axle load: 11,600 kg; tyre tread left inside: 50%; left outside: 70%; right inside: 75%; right outside: 75% Rear axle 2: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inside: 45%; left outside: 80%; right inside: 75%; right outside: 80% Rear axle 3: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inside: 75%; left outside: 40%; right inside: 70%; right outside: 75% Rear axle 4: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inside: 60%; left outside: 60%; right inside: 40%; right outside: 75% Dimensions Overall dimensions (L x W x H): 1,323 x 252 x 260 cm Weights Unladen weight: 11,460 kg Payload: 59,940 kg Gross vehicle weight: 71,400 kg Maintenance, History, and Condition Hsdpfx Aaowkd Hpsbenu APK (Roadworthiness Inspection): valid until 02.2026 Technical condition: very good Cosmetic condition: very good

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Hjdpevtpq Hsfx Aabonu Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, mileage: 8,45,619 km, power: 294 kW (399.73 HP), fuel type: diesel, color: yellow, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2010, Scania G400 6x2 Automatic transmission Retarder Leaf/Air suspension Crane: Palfinger PK60002 G 4x Hydraulic outriggers Radio remote control 7x Hydraulic extensions 2x Manual extensions Load capacities: 4.40 m – 11,780 kg 5.80 m – 8,640 kg 7.40 m – 6,480 kg 9.40 m – 4,840 kg 11.40 m – 3,810 kg 13.60 m – 3,070 kg 15.70 m – 2,580 kg 18.00 m – 2,210 kg 20.30 m – 1,950 kg Ballast platform = Further Information = Technical Information Number of cylinders: 6 Axle configuration Front axle: Tire size: 385/65R22.5; Steering axle; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 40%; left outer: 40%; right inner: 40%; right outer: 40%; Suspension: air suspension Rear axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 40%; left outer: 40%; right inner: 40%; right outer: 40%; Suspension: air suspension Weights Unladen weight: 19,720 kg Payload: 10,280 kg Gross vehicle weight: 30,000 kg Hnedpfx Ajxgvgqjabju Functionality Crane: Palfinger Financial Information Price: On request Identification Model number: G400 6x2 / PALFINGER PK 60002 / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We make every effort to provide correct information, but no rights can be derived from the texts provided.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,661 h, load capacity: 2,500 kg, lifting height: 4,400 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,220 mm, power: 38 kW (51.67 HP), drive type: Treibgas, LPG forklift Load center: 500 Mast type: Triplex Transmission: Hydrostat Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Hnsdpfx Aaot Dru Ssbsu Rear tires type: Superelastic Description: Sideshift, Bale clamp (opening range from 80 - 225 cm) 3rd valve, 4th valve, rear working lights, front working lights, half-cab, LED,

Condition: new, overall weight: 53,000 kg, maximum load weight: 45,115 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate delivery and short-term notice, on our website. Extract from the equipment list. Complete specification available upon request. Cargo Area: * Cargo area with approx. 30 mm thick hardwood floor * 8 pairs of lashing rings foldable outwards (LC 10,000 daN) Landing Gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck takes place via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display these data. Axles and Suspension: * BPW axles, technical capacity per axle 10,000 kg * 1st and 3rd axles hydro-mechanically steered, mounted on turntable, 2nd axle fixed * Air suspension with lift/lower valve * Axle tool Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M) without interconnecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin ISO sockets * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned with shot blasting machine after welding * Second blasting with corundum for optimum coating adhesion * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * 4 wheel chocks with holder on the front wall * Storage for approx. 1,000 mm stake pockets in the central beam at the rear * At the gooseneck and rear panel, left and right, one bracket each for warning signs incl. socket * Yellow reflector tape according to EU regulations on the side and rear of the trailer * 10 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * European reflector boards (Red-Yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mudflap at the rear of the trailer Hnjdpfexl Nf Rjx Aabju * Manual and description on USB stick * 80 km/h speed stickers at the rear and on both sides * Electro-hydraulic power unit * 1 shunting coupling bolted with reinforcement to the end traverse * Axle load gauge to determine axle load including load diagram * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * Remote steering from front and rear via cable remote control with push buttons, with axle alignment control (without installation in the tractor unit) * 7 pairs of galvanised plug-in stanchions approx. 100 x 50 mm, approx. 1,000 mm high * 4 pairs of stake pocket rails, mounted transversely in the platform for plug-in stanchions approx. 100 x 50 mm * Spiral cable

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,050 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 2,420 mm, loading space height: 200 mm, first registration: 12/2008, Equipment: ABS, BALLAST TRAILER, weight holder, drop sides, steel chequer plate floor, 50 mm towing eye, 'haacon' landing gear, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension. The vehicle may be fitted with advertising stickers and/or inscriptions. Hjdpjwzfzcefx Aabsnu Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be fitted with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: good (used), axle configuration: > 3 axles, wheelbase: 8,200 mm, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,550 mm, first registration: 05/2000, suspension: air, tire size: 425/55 R22,5, Year of construction: 2000, Equipment: ABS, = More options and accessories = - EBS - Air suspension - Drum brakes = Remarks = MOL 1214/40Qua/62/77 ballast semi-trailer with air suspension, 4 axles, axles 3 and 4 are forcibly steered, SAF axles with drum brakes, 2x6 stanchion pockets, hardwood floor, tires: 425/55 R22.5 (average 75%), ABS, unladen weight: 10,180 kg, permitted total weight: 62,000 kg, Belgian registration = Further information = Axle configuration Tire size: 425/55 R22.5 Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Tire tread left: 50%; Tire tread right: 65% Rear axle 2: Max. axle load: 10,000 kg; Tire tread left: 55%; Tire tread right: 45% Rear axle 3: Max. axle load: 10,000 kg; Steered; Tire tread left: 90%; Tire tread right: 80% Rear axle 4: Max. axle load: 10,000 kg; Steered; Tire tread left: 65%; Tire tread right: 95% Dimensions Dimensions (L x W): 1385 x 255 cm Weights Unladen weight: 10,180 kg Payload: 51,820 kg Gross vehicle weight: 62,000 kg Functional Loading platform height: 155 cm Condition Technical condition: good Hjdpev Dwgqofx Aabonu Visual condition: good Further information Please contact Arne Honingh for further information.

Condition: used, mileage: 7,79,786 km, power: 480 kW (652.62 HP), first registration: 05/2007, overall weight: 28,000 kg, fuel type: diesel, axle configuration: 4x2, operation weight: 18,000 kg, maximum load weight: 10,500 kg, empty load weight: 7,500 kg, tire size: 315 / 60 R 22.5 / 11mm, next inspection (TÜV): 04/2016, wheelbase: 3,500 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air/air, total length: 5,750 mm, total width: 25,500 mm, total height: 39,000 mm, front tire size: 315 / 60 R 22.5 / 11mm, number of seats: 2, Equipment: air conditioning,

Condition: used, mileage: 8,45,619 km, power: 294 kW (399.73 HP), fuel type: diesel, color: yellow, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2010, first registration: 05/2010, Equipment: crane, Scania G400 6x2 Automatic transmission Retarder Leaf/Air suspension Crane: Palfinger PK60002 G 4x Hydraulic outriggers Radio remote control 7x Hydraulic extensions 2x Manual extensions Load capacities: 4.40 m – 11,780 kg 5.80 m – 8,640 kg 7.40 m – 6,480 kg 9.40 m – 4,840 kg 11.40 m – 3,810 kg 13.60 m – 3,070 kg 15.70 m – 2,580 kg 18.00 m – 2,210 kg 20.30 m – 1,950 kg Ballast platform = Further Information = Technical Information Number of cylinders: 6 Axle configuration Front axle: Tire size: 385/65R22.5; Steering axle; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 40%; left outer: 40%; right inner: 40%; right outer: 40%; Suspension: air suspension Rear axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 40%; left outer: 40%; right inner: 40%; right outer: 40%; Suspension: air suspension Weights Unladen weight: 19,720 kg Payload: 10,280 kg Gross vehicle weight: 30,000 kg Functionality Crane: Palfinger Financial Information Price: On request Identification Model number: G400 6x2 / PALFINGER PK 60002 / Hnedpfx Asw Tkhqoabeu = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We make every effort to provide correct information, but no rights can be derived from the texts provided.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Hnsdpfow U Dt Nex Aabeu Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, overall weight: 66,500 kg, maximum load weight: 56,590 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, More vehicles available at Extract from specification. Full specification available on request. Chassis Chassis frame constructed from welded longitudinal members and through-bolted cross-members * Underrun bumper approx. 700 mm wide * Fifth wheel plate at least approx. 8 mm thick, mounted between the main beams * Cross-member spacing max. 400 mm (for longitudinally laid floor) Hedpfxoxfx Rve Aabenu * 3.5 inch king pin to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty), S-foot Axles * 4 x 10 t SAF axles with large drum brakes * 22.5 inch single tyres * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension units each rated at 10 t capacity * Lift and lower system with 1 rotary slide valve Knorr/Wabco * Bracket for lift and lower device, bolted design Brakes * Smartboard/TIM/Info center on mount for lifting and lowering, in addition to lift/lower valve, without battery (operable only with tractor unit) * Holder for lighting and brake system at the front of underrun bumper, total height approx. 700 mm * Basic tyre pressure monitoring system, connected to EBS CAN-bus * With double release valve for brake and spring chamber * Test nipple for brake cylinder pressure at front right brake cylinder * 1 each red and yellow coupling head * Lift and lower control fitted to left rear side (in direction of travel) * EBS braking system make: Wabco * EBS diagnosis via CAN-bus (EBS socket), no diagnostic cable routed to outside! Tyres * 8 x 445/65 R 22.5 - branded make of our choice * Hub centring Lubrication Lubrication nipple strips on bogies and at the steering front * No central lubrication Bodywork * Without body certificate to DIN EN 12642 XL * 2x LED work lights mounted on top of front bulkhead (facing rear), switch on lift/lower holder * Heavy-duty front bulkhead suitable for platform * Contour markings: yellow sides, yellow rear * Front bulkhead approx. 800 mm high, with sheet metal cladding, bolted design Lighting system Work lights: 2x LED integrated in lamp panel, operated via reverse gear * 2x LED work lights, switched via reverse, one per side near landing gear * 2x LED reversing lights, one per side in front of the 1st axle * Lighting/electrical system make of our choice * Number plate illumination * The towing vehicle must provide sufficient power for the selected lighting (especially reversing light) * Position lights front, lower, one right and one left, white (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin sockets at the front via multifunction box * EBS socket * 1 pair of lane departure marker lights (LED) Floor * Hardwood floor approx. 28 mm thick, alternating with galvanized omega steel profiles Accessories * Vehicle swing-out sticker at the rear * Rear marking plate (ECE) as per our choice * Aluminium underrun protection * Folding and extendable rear right access ladder (without platform) * 2 wheel chocks with holders on front bulkhead * 2 rubber buffer stops at rear corners Mudguards * Rear mud flaps with ES-GE advertising * 180-degree plastic mudguards over each axle * 4 pairs of antispray mud flaps for single tyre configuration Paint/Coating * Chassis painted RAL 1007 daffodil yellow * Front bulkhead (steel construction) in RAL 1007 na

Condition: new, machine/vehicle number: 10463, The AR series are low-speed rotors. They are available with 2, 4, 6 or 8 worm shafts. The machines are designed so that each screw unit is independent and mounted separately in the chassis. Screw shredders are designed for shredding friable materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to interfering materials such as glass, iron parts, stones, etc. The AR series is ideally suited for use as a bale breaker for e.g. PET bottle bales. Hodjghgipepfx Aabonu

Condition: excellent (used), axle configuration: > 3 axles, wheelbase: 7,840 mm, loading space length: 12,550 mm, loading space width: 2,520 mm, loading space height: 1,650 mm, first registration: 11/1999, suspension: air, color: orange, tire size: 275/70-R22.5, Year of construction: 1999, Equipment: ABS, = Additional Options and Equipment = Hedexm Rf Iepfx Aabonu - BPW axles - EBS (Electronic Braking System) - Air suspension - Drum brakes - Central lubrication system = Remarks = 11/1999 NOOTEBOOM OVB-73-04 4-axle ballast trailer, axles 2, 3, and 4 are hydraulically steered, BPW axles with drum brakes, hardwood floor, numerous stake pockets and heavy-duty lashing eyes, central lubrication system, 3.5" king pin, air suspension, unladen weight: 12,300 kg, GVW: 71,400 kg, twin tyres with 275/70-R22.5 tyres (L: 10/12, 12/9, 10/8, 6/4 mm; R: 11/12, 8/9, 11/10, 5/4 mm), Belgian registration with valid technical inspection until 09/12/2025. = Further Information = Axle configuration Tyre size: 275/70-R22.5 Axle make: BPW Eco Brakes: drum brakes Suspension: air suspension Rear axle 1: twin wheels; max. axle load: 11,600 kg; left inner tyre tread: 65%; left outer tyre tread: 75%; right inner tyre tread: 70%; right outer tyre tread: 75% Rear axle 2: twin wheels; max. axle load: 11,600 kg; steered; left inner tyre tread: 75%; left outer tyre tread: 55%; right inner tyre tread: 50%; right outer tyre tread: 55% Rear axle 3: twin wheels; max. axle load: 11,600 kg; steered; left inner tyre tread: 50%; left outer tyre tread: 65%; right inner tyre tread: 70%; right outer tyre tread: 65% Rear axle 4: twin wheels; max. axle load: 11,600 kg; steered; left inner tyre tread: 40%; left outer tyre tread: 25%; right inner tyre tread: 30%; right outer tyre tread: 25% Dimensions Size (L x W x H): 1,255 x 252 x 190 cm Weights Unladen weight: 12,300 kg Payload: 59,100 kg Gross vehicle weight: 71,400 kg Maintenance, History and Condition APK (periodic technical inspection): valid until 12/2025 Technical condition: very good Visual condition: average Further information Please contact Arne Honingh for more information.