Used Brochures for sale (271)

Condition: used, Year of construction: 2019, LANGZAUNER LZT 70 – hydraulic veneer press, manufactured in November 2019. - Four press cylinders - Pressing force: 70 t according to the manufacturer's brochure - Press plate size: 2,500 × 1,300 mm according to the manufacturer's brochure for LZT 70 Fgsdpo Ahzqwjfx Abzei - Electric plate heating - Connection: 3 × 400 V + N + PE, 50 Hz - Connected load: 19.3 kW according to the nameplate Collection possible from December 15, 2026, at the latest by February 28, 2027. Inspection by appointment. Disassembly, loading, and transport upon agreement. Price upon request.

Condition: used, Professional brochure production system by Duplo. Consisting of the DFC-10 collator, DBM-120 booklet maker, and DBM-120 T trimmer. - Model: Duplo DFC-10 Collator - Model: Duplo DBM-120 Booklet Maker - Including DBM-120 T (trimmer) - System for automatic brochure production - Robust construction in gray Feds Aiwtwepfx Abzegi This system is ideally suited for professional use and enables efficient document processing. If you have any further questions regarding the technical details or would like to arrange a viewing, please do not hesitate to contact me.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface Fedpfszz Smcjx Abzsgi 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Year of construction: 2023, condition: new, functionality: not functional, machine/vehicle number: 75010; 75011, We offer two ElectraTherm AC800 ORC units for generating electricity from waste heat, including two external LU-VE air coolers. The units were manufactured in 2023 and are installed at the premises of EKOLOGIE s.r.o. (ekologiesro.com) in Rynholec, Czech Republic. They are in new, unused condition and have never been put into operation. The equipment is available immediately; dismantling will be handled by the seller. TECHNICAL DESCRIPTION The equipment operates on the principle of an organic Rankine cycle (ORC). The AC800 design is based on the PM75 series and utilizes a modified internal hydraulic circuit that allows for independent cooling of the outlet heat to the desired parameters. EQUIPMENT IDENTIFICATION • Manufacturer: ElectraTherm, by BITZER Group • Commercial designation: AC800 • Model according to the nameplate: ET75B • Manufacturing design: AC800-IP • Serial numbers: 75010 and 75011 • Year of manufacture of both ORC units: 2023 TECHNICAL DATA ACCORDING TO THE NAMEPLATES • Maximum gross electrical power of the generator: 75 kW per unit • Total maximum gross power of both units: 150 kW • Electrical system: 400 V, three-phase, 50 Hz • Operating range of hot water temperature: 65–115 °C • Maximum hot water flow rate: 83 m³/h per unit • Working fluid: R245fa • Nameplate weight "Tare Weight": 2,979 kg per ORC unit, excluding the external cooler • Maximum nameplate power consumption: 11.2 kW for unit 75010 and 11.5 kW for unit 75011 The stated electrical powers are the maximum gross values of the generators. The actual power depends on the conditions of the heat and cooling sources; the net power of the entire installation also depends on the consumption of auxiliary equipment. SCOPE OF SUPPLY • 2× ElectraTherm AC800 ORC unit • 2× external LU-VE air cooler, each with six fans External pumps, separate external heat exchangers, or connecting pipes are not included in the sale. These parts must be procured separately by the buyer. External pipes and other peripheral technologies shown in the photos are not included in the offer. Fjdpfj Ag N T Isx Abzjgi SALE AND AVAILABILITY • Preference is given to selling both sets together; selling one set can be discussed • Price is negotiable • The seller is a VAT payer; the offered price is stated excluding VAT • Availability: immediately • Dismantling will be handled by the seller • Location: Rynholec, Czech Republic The attached brochures present the AC800 model series and the base ORC module PM75, from which the AC800 design is derived. The PM75 sheet serves as supplementary technical information. The specific parameters of the offered AC800 units are stated in this advertisement and in the photos of their nameplates. The scope of supply corresponds exclusively to the description of the offer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, counter reading (black): 1,134, counter reading (color): 3,897, We are offering a nearly new Canon imagePress V900. - V900 with 90 pages/min - 2400 x 2400 dpi print resolution - Banner printing up to 1,300 mm in length - Extensive media handling capabilities - Especially suitable for flyers, posters, packaging materials, brochures - Booklet Finisher-AG1 for the V900 series also included Original price: €42,000 If you have any questions, feel free to contact us. Fedpsw Et A Nofx Abzjgi

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Fgsdpfezyx Evjx Abzji Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, center height in crank: 200 mm, center height: 200 mm, workpiece weight (max.): 100 kg, grinding length: 1,000 mm, workpiece weight between centers: 100 g, workpiece diameter between centers: 400 mm, On behalf of a customer, I am offering this machine, which is in nearly mint condition. It is currently still powered up. The machine is equipped with the following options: Glass linear scales in X and Z axes Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Fgodpow Ed D Refx Abzoi Back Solution Basic Black CAM Profile Security interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1-2-3 (prepared for HF internal grinding spindle) T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning at the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request.

Condition: excellent (used), Year of construction: 2018, The EFI VUTEk GS2000LX Pro is a production-level, hybrid rigid/roll-fed superwide inkjet printer engineered for high-definition point-of-purchase (POP) graphics, indoor signage, and industrial advertising. Utilizing advanced LED UV-curing technology, it balances high-throughput productivity with an eco-friendly design that handles heat-sensitive substrates seamlessly Excellent conditions, 8 colours + White Fgjdpsz Dhnlefx Abzei In production, demo possible Western Europe Installation and training available upon request For further technical specifications please refer to attached brochure

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Technical Specifications Paper Size: Width: 210–370 mm, Length: 210–670 mm (extendable up to 1,000 mm) Paper Weight: 110–350 g/m² (coated, uncoated, and laminated paper) Processing Capacity per Sheet: Up to 8 longitudinal cuts (6 standard, expandable to 8 with an additional module), 30 cross cuts, and 20 creases in a single pass Speed: 30 sheets per minute (A4, short-edge feeding, 2 cuts, 1 crease) Feeding and Stacking: Input tray capacity: 100 mm; Output stacker capacity: 140 mm Dimensions: 2,310 mm (W) × 1,005 mm (D) × 1,110 mm (H) – operating configuration Weight: 275 kg Connectivity: USB 2.0 with standard PC Controller software Fodpfxsz Rz D Uo Abzegi Product Description The Duplo DC-646 Slitter/Cutter/Creaser is a premium print finishing solution designed for medium- to high-volume digital print providers. Engineered to handle demanding production tasks with ease, it combines slitting, cutting, creasing, and optional perforating in a single pass, making it ideal for producing business cards, menus, brochures, and direct mail materials. The DC-646’s advanced feeding system ensures accurate and reliable paper handling, while its CCD camera and barcode reader automate job setup for seamless production. Its modular design allows for customization, including the use of rotary tools for creasing and micro-perforating, providing print service providers with the flexibility to meet various finishing requirements. With a processing speed of up to 30 sheets per minute, the DC-646 increases productivity while minimizing manual intervention. Equipped with PC Controller software and the ability to store an unlimited number of jobs, it enables quick job changeovers and consistently precise results, saving print service providers valuable time and resources while delivering professional-quality finished products.

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Fjdpsz Dt Hysfx Abzegi Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Fedpfx Aezhv Nnsbzogi Weight approx. 240 kg One chip collection bin / approx. 185 l Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA All information is subject to change. This information was taken from a brochure.

Condition: like new (used), Plockmatic SQF-104 Book spine press The SQF-104 book spine press is the ideal machine for creating a flat book spine on saddle-stitched brochures. This gives such brochures the appearance of perfect-bound books, which is particularly recommended for products with a larger page count. Whether used offline or in combination with a digital printing system or a brochure production line, the SQF-104 processes brochures up to a thickness of 24 sheets of 80 g/m². We can also easily mount it on the trimmer / ERNST NAGEL. Foldnak 8 and trimmer are also available here on Maschinensucher.... Fode Aba I Sopfx Abzsgi Maximum paper format 325 x 480 mm Minimum paper format 120 x 200 mm Speed: up to 1,800* booklets per hour Number of sheets: up to 24 sheets of 80 g/m² Electrical connection: 230 V / 50 Hz

Condition: used, Year of construction: 2011, input voltage: 400 V, pressure: 7 bar, total width: 4,600 mm, total length: 6,700 mm, type of input current: three-phase, space requirement height: 2,050 mm, space requirement length: 6,700 mm, space requirement width: 4,600 mm, No. 3289 Corner cleaning machine Rotox EPA 479 + WTS 427 Used, year of construction 2011 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site CNC corner cleaning machine for welded PVC window frames and sashes Turning table WTS 427 for automatic infeed, outfeed and turning of the frames Automatic processing of all 4 frame corners Mobile control console with Windows-based PC visualisation Working range Outer frame size min. 350 x 350 mm, max. 3000 x 3000 mm Clear inner dimension min. 190 x 190 mm Profile width 40 - 140 mm, profile height 40 - 180 mm Pneumatic workpiece clamping Machining units Knife unit for visible surfaces, top and bottom Vertical CNC milling unit for the gasket groove Knife units for inner corners, vertical with draw knife Radius unit and inner corner bevel Outer corner milling unit with contour milling disc, tool Ø 170/200 mm, 5500 rpm Horizontal milling unit Outer corner plunge knife unit Tooling as per tool list with contour milling disc Ø 190 mm, carbide milling cutters as well as visible surface knives, draw knives and plunge knives Programs and tools set up for the profile system previously used Connected loads Power supply 3/N/PE 400 V, 50 Hz Current consumption 21 A, upstream fuse 3 x 32 A slow-blow Operating pressure 6 - 7 bar Air consumption approx. 430 l/frame CE marking Installation dimensions approx. 6700 x 4600 x 2050 mm LWH Machine without turning table approx. 2000 x 1800 x 2050 mm LWH Weight approx. 2400 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location Fsdpfx As Ah I Dkjbzogi

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Fodpfs Ah Tlrex Abzjgi Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)

Condition: used, Year of construction: 2008, Duplo booklet maker System 5000 Offer consists of: Fedpfx Abj Ah Salezjgi 1- 2x 15F-21 DC-10/60 collator with 10 stations 2- 11A-12 LUL-HM left-hand transfer module with manual insertion station 1 3- 12J-22 DBM-500 brochure inserter with 2 Hohner standard stapling heads 1 4- 12K-21 DBM-500T front trimmer 1 5- 12K-26 long belt stacker 1 6- Stacker System 4000 Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control Fgjds Ahqpgopfx Abzsi CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Fodpfx Aoy Ed Hfsbzogi Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Fgsdozz Rkaepfx Abzei Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system Fodpfx Absyr D Nxszsgi * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Year of construction: 2022, condition: used, Year: 2021/2022 Condition: very good, functional Counter: 13M envelopes Machine Type: Automatic mailing and fulfillment line for collating, inserting and sealing envelopes with the capability of processing rigid and thick products. - Manufacturer: CMC S.p.A., Italy - Model: CMC Smart Mailer / Rigid Mailer Special Technical Specifications: - Maximum mechanical speed: up to 4,000 envelopes/hour - Envelope width: 250–350 mm - Envelope length: 280–350 mm (including flap) - Product thickness: min. 2 mm / max. 25 mm - Recommended envelope flap height: 50–70 mm Configuration: - 2× A15 – Electronic hopper feeders for rigid and thick products - A21F – Photocell-controlled thickness gauge - 3× A14Q – Sheet feeders for inserts - SEP1 – Rotary separation disc - F15 – High-speed sheet feeder - A14_Env_L – Large envelope feeder - Vacuum Belt – Vacuum conveyor - HM1 – Automatic programmable hot-melt gluing system with 1 glue gun - RA20_i – Conveyor for collation of staggered products - PC_Add Special – Software for print verification, barcode reading and database management - 2× SDC – Sound-deadening boxes for vacuum pumps - F15 High-Speed Sheet Feeder - Minimum format: 80 × 110 mm - Maximum format: 210 × 300 mm - Minimum paper weight: 70 gsm - Maximum product thickness: 2 mm - Loading capacity: up to 500 sheets - Double-sheet detection system - Brushless motor drive - A15 Hopper Feeder - Product length: 120–320 mm - Product width: 100–300 mm - Product thickness: 1–25 mm - Suitable for rigid products, stitched products and bound booklets. - A14Q Sheet Feeder Fgjdpjztc Afjfx Abzji - Product length: 100–210 mm - Product width: 110–300 mm - Product thickness: from 1 sheet (70 gsm) up to 4 mm - Minimum paper weight: 70 gsm - Utilities - Main power supply: 14 kW, 400 V AC, 27 A, 3-phase + N + PE - Auxiliary power supply: 3 kW, 230 V AC, 15 A - Compressed air: approx. 600 l/min at 6 bar - Clean, dry and oil-free compressed air required. Machine Dimensions: According to the machine layout, the main production line has an overall length of approximately 10,100 mm with a maximum overall width of approximately 4,300 mm. The layout is indicative and subject to final machine configuration. Machine Description: The CMC Smart Mailer is a high-performance automatic mailing and fulfillment system designed for collating, verifying, inserting and sealing envelopes. The machine is capable of processing single sheets, inserts, stitched brochures, bound booklets and other rigid products up to 25 mm thick. Equipped with automatic thickness control, double-sheet detection, barcode reading, print verification, database management software and programmable hot-melt gluing, the Smart Mailer ensures maximum production efficiency, accuracy and reliability. With a mechanical speed of up to 4,000 envelopes per hour, it is an ideal solution for direct mail, transactional printing, fulfillment and document mailing applications.

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, resolution (max.): 2,400 dpi, number of feeding trays: 6, counter reading (black): 1,21,531, counter reading (color): 2,36,585, input voltage: 220 V, Equipment: auto duplex, Xerox PrimeLink C9070, including OCT, 1OHCF, and an external Fiery Controller running Windows 10 on an SSD. Total color page count: 236,585 Total black and white page count: 121,531 Total page count: 358,116 ⚡ High productivity with 70 color pages per minute. 🎨 Very consistent color quality thanks to the EX Fiery Controller. 📚 Suitable for brochures, flyers, business cards, posters, book covers, and direct mail. 📄 Supports heavy paper stocks up to 350 g/m². 📏 Long sheets up to 660 mm for banners and triptychs. 🔄 Large paper capacity reduces downtime during production. 🖨️ Professional workflow integration for graphic production environments. Are you looking for other options for this machine? We are flexible and can configure the machine to your specifications! This machine has been inspected and thoroughly tested by our own specialized technical service department. If you require further information, please do not hesitate to contact us. Fjdpfx Aezqbb Usbzsgi Worldwide shipping is possible.

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm Fedpfxozt S Hmj Abzjgi With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: like new (used), Year of construction: 2022, The Jeti Tauro H3300 is Agfa's 3.3 m-wide hybrid UV inkjet printer, designed for high-volume production on both rigid and flexible media. Agfa currently lists it with speeds of up to 1,280 m²/h, a maximum print width of 330 cm, and configurable/upgradeable automation, speed and colors Manufacturing Year: 2022 Colour configuration: CMYK Lc Lm + white Roll to roll: included Fjdpfx Aszx Harebzsgi Mileage: lamp usage 600 hours, the printer has very low mileage, like show room printer!!!!! Service: Under Agfa service contract Under production, demo possible Location: Western Europe Print head status: excellent Availability: September 2026 For further technical details please refer to enclosed brochure Positioning 3.3 m-wide hybrid UV LED inkjet printer Designed for both rigid and flexible substrates 6-color configuration Standard productivity: up to 450 m²/h Can be upgraded to H3300 HS, reaching up to 600 m²/h Optional white, or white + primer Built for high-volume / multi-shift production A Agfa +1 Main commercial advantages Growth path: start with the H3300 S and upgrade as production volume increases. Wide application range: signage, displays, POP/POS, boards, banners, décor, packaging and other rigid/flexible applications. Low ink consumption: Agfa's Thin Ink Layer™ technology helps reduce ink usage while maintaining strong image quality. Automation: options include automatic board feeding and automated loading/unloading. Asanti workflow: integrates production preparation, job management and calibrated print modes for color consistency.

Condition: excellent (used), Year of construction: 2006, Ref:11173 . 2006 Palamides Alpha 500 Presser/Stacker Mobile delivery system, fully automatic for production of pressed & counted bundles of folded leaflets or stitched brochures. Products can be handled in a shingled stream or single sheet operation. Suitable for inline processing of up to 3-up products. Features; Variable height infeed (40 – 105 cm) Fgodpfx Abs Ah D Irezsi Double pressing station with air-removing rollers PLC controlled counting of the stack with jogging Completed stacks can be ejected to the left or right. Mobile unit, can be quickly moved from one machine application to another. Specification: Formats: 1-up use, Max: 510 x 330 mm 2-up use, Max: 235 x 330 mm 3-up use, Max: 150 x 330 mm Min: 90 x 120 mm Bundle height, Min: 10 mm Max: 160 mm Performance : 900 bundles per hour per up-work. Speed : 15-200 m/min. Air consumption : 100 ltr./min. net 6 bar.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Fodpfezz Sw Iex Abzogi Tool thickness increased by 100 mm Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)