Used Brochures for sale (271)

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Fgsdpou S An Defx Abzji Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, stroke rate (max.): 8 1/min, throat depth: 355 mm, punching force: 92 t, punching diameter: 30 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 500 mm, table width: 500 mm, overall weight: 2,200 kg, total length: 1,860 mm, total width: 790 mm, total height: 1,900 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, electrical contact length stop, emergency stop, foot remote control, notching unit, Metal Technics Polska MTP IW90 hydraulic ironworker – NEW – versatile steel processing in one machine A practical solution for metal fabrication workshops, steel construction and maintenance departments. The MTP IW90 combines punching, flat-bar and plate shearing, section cutting and notching in one hydraulic machine. The supplied bending attachment also enables short plate bending below 500 mm width. Several operations can be carried out at the same workstation, reducing handling between separate machines. TECHNICAL DATA • Year of manufacture: 2026 • Punching force: 900 kN • Punching capacity: Ø30 mm hole in 20 mm steel • Maximum cutting thickness: 20 mm • Maximum cutting length: 480 mm • Material tensile strength: up to 450 N/mm² • Shearing angle: 8° • Ram stroke: 80 mm • Nominal stroke rate: 8 strokes/min • Throat depth: 355 mm • Main motor: 5.5 kW • Supply: 400 V, 50 Hz, three-phase • Machine dimensions (L × W × H): 1860 × 790 × 1900 mm • Brochure gross weight: 2200 kg Maximum cutting thickness and maximum cutting length are separate limits; the permissible combination depends on the material and operation. STANDARD EQUIPMENT • Punch and die tooling • 500 × 500 mm work table with chamfering provision • 1000 mm electric back gauge / contact length stop • Foot pedal controls with stop buttons • Schneider electrical components • Hydraulic system with HUADE valves and a Japanese-brand oil pump • Bending / press attachment and reducing sleeve PRICE AND DELIVERY €10,970 net, excluding VAT, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Delivery to any destination in Europe – shipping cost calculated upon request (not included in the machine price). Fgedjz Hy I Nspfx Abzji The model-specific inspection report records a successful factory inspection on 20 August 2026. Photos show the supplied model and its equipment. Technical capacities are based on the supplied documentation; tooling and the material being processed determine the applicable operating limits.

Condition: used, Year of construction: 2000, Horizon AFC-504 AKT Automatic Combination Folder, Used The Horizon AFC-504 AKT is a proven and robust automatic combination folder, specially designed for efficient processing of brochures, inserts, and other folding jobs. Key Features: - Sturdy construction for reliable and long-lasting performance - Flexibility to handle various folding types and paper formats - Easy operation for quick setup times - Suitable for medium to large production volumes Technical Specifications: - Max. sheet size: 490 x 650 mm - Min. sheet size: 120 x 172 mm - Paper weight: 40 to 250 g/m² - Stack height: up to 650 mm - Production speed: up to 27,000 cycles/hour - Power supply: 400 V, 50 Hz, 2.5 kW - Dimensions (L x W x H): 2,540 x 1,790 x 1,440 mm - Weight: approx. 870 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Fgjdpfew Eu Rbex Abzei Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Fgjdpfjx Upqhex Abzji Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Fsdpfsqrtv Rjx Abzogi Brushes are stored on round bars with a diameter of 90 mm each with linear guides Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg CE declaration of conformity Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: Fgedpeu Nu Hiofx Abzoi -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: excellent (used), Year of construction: 2005, AMADA MODEL HFT 130-4 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 AMADA CONTROL 4 AXIS cnc control, FEISSLER machine mounted laser guards , side and rear interlocked fencing Model Amada HFT 13/3 downstroke CNC Press brake Year 2005 Tonnage 1300 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 11kw Weight 8750 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control can be demonstrated under power Fgjdpfxozbqnyo Abzji BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, mileage: 10,600 km, power: 75 kW (101.97 HP), first registration: 07/2020, fuel type: diesel, overall weight: 2,830 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer hitch (ball head detachable) Comfort package Head airbag system ParkPilot system front and rear Blind Spot Monitoring Comfort package Audio system Multimedia, hands-free system Bluetooth, USB interface, smartphone interface (Apple CarPlay & Android Auto), ParkPilot system rear, steering wheel (leather), Fodpfevwiqhsx Abzegi audio controls on the steering wheel ParkPilot system front and rear Exterior mirrors electrically adjustable and heated, electrically foldable, fog lights, driver assistance system: blind spot assist Trailer hitch (ball head detachable) Head airbag system Side airbags front Additional equipment: Airbag driver/passenger side, floor covering: luggage/cargo compartment floor (rubber), on-board computer, brake assist, double front seat with storage compartment, driver assistance system: hill start assist (HSA), rear wing doors without glazing, body/superstructure: van, body variant: vehicle length L1, closed cargo area partition, steering column (steering wheel) adjustable, headlight range adjustment, engine 1.5 Ltr. - 75 kW CDTI DPF, ParkPilot system rear, wheelbase 2925 mm, tire repair kit, low emissions according to emission standard Euro 6d-TEMP, sliding door right, SCR system (AdBlue technology), visibility package, steel rims 7x17, start/stop system, socket (12V connection) in the cargo compartment, socket (12V connection) in the center console, door handles exterior black Due to the fast-paced nature of our times, changes, prior sale and errors are expressly reserved. All information given in advertisements, on the internet, on price tags as well as in brochures or images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for printing, writing, typing or data transmission errors.

Condition: good (used), Duplo Docucutter DC-645 Creaser, cutter The machine is fully operational, ready for production. Description: The DC-645 has been designed for the growing needs of fast execution of such orders as: business cards, invitations, postcards, leaflets, covers, folders. Docucutter DC-645 cuts lengthwise and crosswise as well as creases, perforates in one pass, ensures continuity of production with minimal operator input. All machine settings can be adjusted automatically – from the settings of the cutting knives, creasing beams to the setting of the creasing depth. When cutting out the work, clippings are created, which, thanks to appropriate control, go directly to the basket located in the lower part of the device’s housing. With the DC-645 device, we will perform such works as: Postcards Cut and creased business cards Flyers Brochures Book covers CD/DVD covers Menu Mailing materials Automatic discharge of clippings into the basket Automatic adjustment of creasing depth paper size: 370×650 mm Min. paper size: 210×210 mm Fjdpfx Ajz N R U Tobzogi Minimum output format: 48×85 mm Paper weight: 110-350 g/m2 Machine weight: 360kg

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools + 4 driven tools • Turret tools: 10 positions Fgodpfx Aoyi Eihsbzei • Bar feeder: iemca boss 332 e/r type 37ll - year 2008 • Equipment: chip conveyor

Condition: new, Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 7IMB, working width: 420 mm, warranty duration: 6 months, operating speed: 500 mm/s, Komfi ImiJET-BE70 Book Edge printing machine Book edge printing machine offers special look to your books with possibility of personalized data printing. Semi-automatic operation: manual feeding and unloading of books, the printing process is controlled automatically. Printing heads using oil-based inks are easy to clean with minimum risk of stuck nozzles. Variable data (multi-page PDF), variable resolution (180 x 360, 360 x 360, 720 x 360 dpi) and variable multi-pass printing possible. Different adapters for wire-o binding, so covers and hard covers, flat piles to get the best result. Options: Oil-based ink ready Manual feeding & unload Automatic print process Variable data & resolution Parameters: Production speed: 180 edges/hr Max. production speed: 30 m/min Paper weight 115-350 g/m2 Min. book dimensions: 100 x 100 x 5 mm Max. book dimensions: 420 x 420 x 70 mm Printing heads: 4x Konica Minolta For customers who want to stand out from the competition and offer unique printed products. Soft cover books, hard cover books, colored brochures, wire-o products, notepads, note blocks, business cards. Fsdpfsziiduox Abzsgi Economical run due to less expensive consumables and low risk of stuck printing heads. High quality components used to guarantee reliable and low service production.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Konica Minolta Large Capacity Unit LU-202XLm’. In this offer, you are purchasing a used brochure finisher ‘Konica Minolta SD-513’. Item for sale: 1 x Konica Minolta SD-513: Condition: Fgjdpfxeyr Rkcs Abzji This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Fgodpfx Asz Rk Nyobzoi

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Fgodexnxy Nspfx Abzsi Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, mileage: 87,600 km, power: 56 kW (76.14 HP), first registration: 12/2020, fuel type: diesel, overall weight: 1,980 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 3-seater Folding table on the backrest Airbag driver/front passenger side Audio controls on the steering wheel Professional package Sliding door, right side Front left seat adjustment (6-way) Fjdpfx Abowqma Sezsgi Package: Professional (double passenger seat, foldable with folding table, adjustable on the backrest of the middle seat of the double passenger seat - seatbelt warning, single passenger seat - electric parking brake - FlexCargo partition, without window, with pass-through function below the double passenger seat including a protective bag for the cargo - wooden floor in the cargo area) Additional equipment: Airbag driver side, audio system BT (Bluetooth/USB interface), driver assistance system: hill start assist (HSA), rear wing doors without glazing, body/structure: van, engine 1.5 L - 56 kW CDTI DPF, wheel hub covers, wheelbase 2785 mm, low emissions according to exhaust standard Euro 6d-TEMP Due to the fast-paced nature of our times, changes, prior sales and errors are expressly reserved. All information given in advertisements, on the internet, on price tags as well as in brochures or pictures represent non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for printing, writing, typing or data transmission errors.

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Fsdpfozbql Sox Abzjgi Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Vötsch Temperature shock chamber / Thermal shock chamber Vötsch ShockEvent T/120/V2 temperature shock chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-checked – water-cooled version with 120-liter test chamber volume For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cyclical testing, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system has a hot chamber and a cold chamber. The test item is transported between the two temperature zones using a mobile test trolley. This allows for rapid temperature changes to test the thermal resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of manufacture: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled version Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test item between the hot and cold chambers Temperature change rates according to manufacturer's brochure: Heating rate, hot chamber: approx. 18 K/min Cooling rate, cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the basic unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Mobile test item trolley Digital control and operating unit Temperature control Water-cooled version Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chambers Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test item support in the mobile trolley Application areas: Temperature shock testing Thermal cyclical testing Environmental simulation Material testing Electronics testing Component testing Fodpfx Ae Ah Shwjbzjgi Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures The table shown in the photos, or any other items not explicitly mentioned, are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: limited functionality, In this offer you purchase a used Squarefold module ‘SDD SFM 7714’ Object of sale: 1 x SDD SFM 7714 works in combination with: Canon Booklet Trimmer F1 Canon Booklet Trimmer G1 The push buttons are defective Fjdpsur Nf Rofx Abzogi Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 2012, Used Horizon VAC-600Ha Collator This used but modern Horizon VAC-600Ha collator is a powerful single-sheet collator. It can be used as a standalone unit or as part of a larger brochure manufacturing system. Special Features: -Modular design: Expandable from 6 to up to 36 stations -Double-cycle program for non-stop operation Fgodszhlt Aepfx Abzei -Individual air supply for each station allows safe paper intake -Suitable for processing various types of paper, including critical materials Technical Specifications: -Maximum paper size: 500 x 350 mm -Minimum paper size: 148 x 120 mm -Load capacity: 130 mm per station -Speed: Up to 9,500 cycles per hour -Dimensions: 810 x 652 x 1,961 mm -Weight: 324 kg per tower -Power supply: 230 V, 10.6 A, 2.3 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2020, HP R2000 Very good status, in production. Year: 2020 Mileage: 45.000m² only Options: edge holders View video for extensive presentation For further technical information please refer to attached brochure The HP Latex R2000 is a high-productivity hybrid large-format printer designed for both rigid and flexible media. It uses HP Latex water-based inks, including white ink, to produce durable, high-quality prints for signage, displays, packaging prototypes, vehicle graphics, and interior décor applications. With the ability to print directly onto rigid boards as well as roll-fed materials, the R2000 combines versatility, vibrant color output, and environmental benefits in a single production system. Specification Value Print technology HP Latex water-based inks Maximum print width 2.49 m (98 in) Printer type Hybrid: rigid flatbed + roll-to-roll Maximum print resolution 1200 × 1200 dpi Fgsdpozdtuaofx Abzoi Ink colors 9 channels: C, M, Y, K, Light C, Light M, Optimizer, Overcoat, White Printheads 8 printheads Ink capacity 5 L (colors/optimizer/overcoat), 3 L (white) Maximum rigid media thickness 50.8 mm (2 in) Maximum roll weight 100 kg Maximum roll diameter 250 mm Connectivity Gigabit Ethernet Printer dimensions 5.10 × 2.04 × 1.75 m Dimensions with tables 5.10 × 3.64 × 1.75 m Weight 1,600 kg Operating temperature 15–30 °C Operating humidity 20–70% RH Power consumption 8–11 kW during printing Warranty (original) 180-day limited hardware warranty Print Speeds Mode Speed Outdoor (3-pass, 70%) Up to 86 m²/hr Indoor Production (6-pass, 110%) Up to 43 m²/hr Indoor High Quality (12-pass, 120%) Up to 22 m²/hr White Spot Up to 36 m²/hr White Overflood/Underflood Up to 16 m²/hr Day & Night (3 layers) Up to 5.2 m²/hr Supported Materials Rigid substrates Foam board PVC foam Corrugated plastic Acrylic Polycarbonate Polystyrene Corrugated cardboard Honeycomb board Aluminum composite panels Wood Glass Ceramic Flexible substrates Vinyl banners Self-adhesive vinyl Coated papers Polypropylene Polyester Canvas Textile (non-porous) Leather Typical Applications Retail signage Backlit displays Vehicle graphics and wraps Wall coverings Window decoration Packaging prototypes Corrugated displays Textile graphics and soft signage

Condition: excellent (used), Year of construction: 2000, Brochure production line: Horizon VAC 100A, SPF 20A, FC20A, LC 200, PJ 77 Counter reading on the VAC 100A tower. The machine is in perfect working order and in very good condition. Input format: Max. 500 mm x 350 mm, Min. 180 mm x 120 mm Output format: Max. 250 mm x 350 mm, Min. 85 mm x 120 mm (cut) Paper thickness: Max. 4 mm Staple pitch: 73 mm - 160 mm 2 stapling heads: Hohner 48/5 Wire thickness: 24 - 28 Machine dimensions: Length 470 cm x width 110 cm x height 196 cm (without PJ 77) Fodpfx Aert T Ahobzegi Weight: 990 kg Power connection: 2 x 230 volts with Schuko plug

Condition: excellent (used), Technical data: Fodpfx Asxtw Ehebzsgi Automatic line for collecting, stitching, and folding brochures 6 feeding stations + 1 cover station Hohner stitchers (2 heads, expandable) Automatic trimmer Electronic control with monitor High performance and precision

Condition: used, Year of construction: 2014, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, total length: 2,800 mm, total width: 2,100 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: CE marking, saw blade guard, scorer, No. 04540 Sliding table saw Martin TC 660 Used, year of construction 2014 Sliding table length 2600 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 3000 / 4000 / 5000 rpm 2-axis scoring unit with manual adjustment Manual saw blade tilting 0° - 46° Electric cutting height adjustment Crosscut table approx. 1250 x 700 mm LW Tiltable crosscut fence extendable up to 3200 mm Saw blade guard can be swung away CE-compliant Incl. operating manual as a .pdf-file Transport dimensions approx. 2800 x 2100 x 1700 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Fgjdpfx Aezmgkaebzji Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 706DGY00306, Part No.: 950 024 014-02 Counter: 220,000 sheets Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures Fgedpfx Abeipmibjzji reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and banner media with excellent application flexibility.

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Fsdpfx Abezcdn Nezegi Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse