Used Brochures for sale (226)

Condition: used, No. 3221 Vacuum dryer / drying chamber DWT / IWT MD 2600 x 13000 Used The machine is still connected to power and heating, but has not been used for 3 years Dryer diameter 2600 mm Dryer length 13000 mm Package length 13000 mm Package width 1200 mm Package height 2100 mm Gross capacity 33 m3 Net capacity 20 m3 sawn timber or 15 m3 logs Electrical connection 44 kW Electrical consumption 15 kW/h Water drain 50 mm Water connection 25 mm Heat connection 87 kW, 85 °C hot water at the dryer Heat consumption 500 kcal per liter of moisture or 0.6 kW per liter of moisture Including BUDERUS B305/160 boiler, heat output 141 - 160 kW The boiler is operated with natural gas The system is supplied as a fully assembled unit Boiler cylindrical on 3 supports Hydraulic, fully automatic boiler lock Boiler material solid stainless steel to DIN, x5 Cr Ni 189 150 mm insulation, clad with 1 mm galvanized sheet steel Rails in stainless steel, spacing 600 mm 1 rail bridge in front of the boiler 4 trolleys for loading and unloading, length 3200 mm each 12 fans with Siemens motors, 2 spare motors Heating coil as stainless steel finned tubes with aluminum fins, length 150 m, surface 250 m2, diameter 25 mm Flow and return pipe diameter 80 mm Heating medium 85 °C Hot water at the consumer Circulation pump capacity 75 m3/h Vacuum pump BUSCH LX 0260 B, year of construction 2013 Nominal suction capacity min. 200 m³/h / max. 455 m³/h / final pressure 33 hPa (mbar) Ltodpfx Aewiw Evsanea 1 electric condenser for condensing the vapor 3 fans for cooling or condensing the vapors PLC control Tracks in front of the dryer 14000 x 600 mm The entire system stands on a concrete floor and can be lifted with a crane and loaded onto trucks Transport dimensions approx. 18000 mm long, 3050 mm high (without cooling system) Sale on behalf of the customer, ex location near 09131 Chemnitz, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, paper width (max.): 330 mm, paper height (max.): 487 mm, number of feeding trays: 3, Equipment: auto duplex, brochure finisher, Konica Minolta Bizhub Pro C2060l sheet-fed digital color printing machine with Fs-612 brochure finisher Lsdpov Sq Siofx Aaneta Maximum media size is 330x487mm, in banner mode up to 1200mm length. In very good condition

Condition: excellent (used), Year of construction: 2006, Collating machine with a sewing, folding and trimming module manufactured by the renowned C.P. Bourg company. Year of production 2006 in the following configuration: Collating Tower BST D+ The collator is a very versatile device for collating many types of paper in a wide range of formats. The sheets are fed by suction belts rather than rollers, which eliminates the possibility of leaving marks on the paper. The suction and blowing force is adjustable without the need to interrupt the operation of the device. The machine is controlled from a touch panel. Specifications: Format range: min. 115 x 200 mm; max. 350 x 520 mm Speed range: 9,000 cycles/hour (10 x 80 g/m² A4 sheets fed per shaker) 5,500 cycles/hour - pick-up per stacker Paper weight: 50 – 250 g/m² Pile height: up to 5 cm Machine dimensions - main tower: 93 x 73 x 200 cm (length x width x height) Weight: 360 kg Ljdpfjrq Havox Aanota The SBM 4 unit has a modular design and consists of the following parts: AGR T stitching machine • two Hohner sewing heads • quick adjustment of the position of the heads • block or saddle stitching • Regular staples • Wheels for quick sliding • Work in line or as a separate unit Specifications: Format range: min. 117 x 200 mm, max. 320 x 450 mm (block sewing) max. 320 x 500 mm (saddle stitching) Paper weight: 60 - 250 g/m² Maximum thickness of the stitched fold: 6,35 mm Capacity: 3,000 trains per hour Dimensions: 55 cm x 60 cm x 110 cm Weight: 114 kg PA T Folding Machine • Automatic synchronization with collating tower and stitching machine speeds • In-line or off-line operation in combination with an AGR T stitcher Specifications: Format range: min. 117 x 200 mm, max. 320 x 500 mm Maximum quantity of folded material: 22 sheets 80 g/m² Capacity: 3,000 products per hour Dimensions: 60 cm x 60 cm x 73 cm Weight: 134 kg TR T Knife Automatic synchronization with colalting tower speeds, stitchers and folding machines, waste container. Specifications: Cropped brochure size range: min. 117 x 100 mm, max. 320 x 250 mm Paper weight: 60 - 250 g/m² Maximum trimmed quantity: 44 sheets 80 g/m² Capacity: 3,000 trains per hour Dimensions: 150 cm x 60 cm x 82 cm Weight: 170 kg SBM Equipment Counter of ready-made sets. A function that throws assemblies with an error without interrupting the operation. Two-knife cutting system with exceptional durability. Reinforced 4-roller folding system. Make adjustments to settings without interrupting your working.

Year of construction: 2013, condition: excellent (used), Second hand machine CNC5003.is basically the standard CNC5003 Table size etc is standard CNC5003 as per brochure. Differences are that; • spindle is 8kW Omlat • ATC is 10 position revolver • Chip extraction is not same as on latest version • Currently the Vacuum pump is not included But, there are also some pluses to this machine • Equipped with CNC aggregate bracket, to rotationally affix aggregates • 1 fixed magazine position on table for CNC aggregate Is included Ltsdpfxek Ttaps Aanea The machine has been operated just for small time (total of ~800h) The machine can be updated with new HSD 11kW spindle which would also include new chip extraction system The machine include: • Machine • VisualCAM software • CNC-aggregate (Atemag, 90° dual) • Assorted tool holders, HSK63F ( ~6 pcs) Spindle upgrade to HSD 11kW would cost 6k€

Condition: used, Year of construction: 1992, machine/vehicle number: 23011, Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mmBroschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery Ledpfxell A Tuj Aaneta Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Machine for cutting labels, books, brochures from pusher dies. Maximum format 350 x 350 mm Ledpfx Aaewm Hk Ajnjta

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Ltjdpfsrrh T Asx Aanja Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Ltedpfsq Ruw Njx Aansa Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, machine/vehicle number: 18086, Doppelkopfheftmaschine - 2 Stitching heads Stapler Nagel Multinak S Mit der MULTINAK S Doppelkopfheftmaschine mit elektrischem Antrieb heften Sie Broschüren und Blocks bis 27 mm Stärke, für Block- und Sattelheftung. Electric stapling machine with two stapling heads with adjustable distance for block and saddle stapling for brochures in medium to high work volumes, for flat and saddle stapling stiting. Baujahr / Year 1996 Heftköpfe AS für Blocks bis 15 mm / Stapling head AS blocks and brochures up to 15 mm  Heftkopfabstand verstellbar im Bereich von / Distance adjustable between 80-155mm Heftklammernlänge / Staples arm length 6-30mm Ledpfx Aaeh Axqxenjta Heftklammernsorten 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples Technische Daten / Technical Details: Anschluss / power supply 400 V / 50 Hz Maße / Dimensions Width 600 x Deep 750 x Tall 1100mm Gewicht / Weight net 100kgs Flaches Anlegen der Heftklammern durch bewegliche Umbieger / moveable bending tools ensure that staples lay flat Einfaches Kippen des Arbeitstisches ermöglicht schnellen Wechsel von Block- auf Broschürenheftung / change-over from flat to saddle stapling is made by simply flicking over the table Maschine ist für Dauerbetrieb ausgelegt - geräuscharm durch Spezialgetriebemotor / for long term use, low noise level through special gear motor Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, No. 3130-02 Block bandsaw Primultini 1300 SG Used, year of construction approx. 1980 Right-hand version Roller diameter 1300 mm Blade support width 140 mm Saw blade 150 x 1.1 mm Clearance height with block carriage CFA according to drawing 1075 mm Ltodpfx Aasurmvaonsa Cutting height with block carriage CFA according to drawing 700 mm Cutting width with block carriage CFA according to drawing 530 mm Electric blade guide and blade tensioning Main motor 380 V, 50 HP Block carriage PRIMULTINI CFA, length 8000 mm 5 automatic clamping blocks Electric closing and opening of the hooks Electric clamping and adjustment Hydraulic feed by means of cable pull Electro-hydraulic block turner with 2 arms System already dismantled Electrics and controls must be partially replaced Total weight approx. 10 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2003, Zusammentragmaschine / Broschürenfertigung Watkiss - SlimVac Vario 10 Booklet Maker / Brochure Finishing Watkiss - SlimVac Vario 10 Zusammentragmaschine / Gatherer Watkiss SlimVac Vario 10 collator Baujahr / Year 2003 - Serial-No. ASF 1092 Format / Size min. 120 x 160mm Format / Size max. 364 x 520mm Paper weight: 40 to 240 gsm. Geschwindigkeit / Speed 2.500 - 5.000sets/hr. Auslage / Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lodpjtpkwysfx Aanjta On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2006, No. 10022 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 100 operating hours Ledewh T D Eopfx Aansta Electric motor Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1998, machine/vehicle number: 42016, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11Anlage besteht aus / Booklet Maker consist of:Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Lsdpfx Aaoibuq Djnsta Geschwindigkeit / Speed 5.100 Product/hBroschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2006, No. 10024 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 500 operating hours Electric motor Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Ljdpfx Aewh S I Neaneta For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2019, No. 10021 Single-shaft shredder / secondary shredder Doppstadt NZ 180 VE Used, year of construction 2019 The machine was used for the secondary shredding of bulky waste Approx. 4000 operating hours The stationary grinder NZ 180 VE can be used to grind biowaste and green waste in composting plants, for different qualities of wood in waste wood processing plants and in biomass processing plants and for most difficult grinding tasks in the field of recycling Stationary / Static Electric Main drive motor (standard values): Type three-phase motor - AC-motor / output 450 kW / rated speed 1490 rpm / operating voltage 400 V / frequency 50 Hz / degree of protection IP 55 Feed hopper Feed cross-section 1778 x 700 mm LW Hydraulic unit: tank volume 20 liters / drive power 1.1 kW / rated voltage 400 V Scraper floor speed: Minimum 0.15 m/s - maximum 0.33 m/s Flail drum: Drum diameter with flails 1120 mm / Drum width 1750 mm / Number of flail rows 4 / Number of flails per row 9 / Drum speed 1000 rpm / Drum weight with flails 2100 kg / Belt drive 6 V-belts / Flail width 100 mm / Flail tip type bear paw Lower belt: center distance 3600 mm / belt width 1600 mm / electric drive, power 5.5 kW Transport dimensions approx. 4780 x 2730 x 3730 (1970) mm LWH Ltsdpfxswhzdge Aanja Weight approx. 18500 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2012, No. 10020 Spiral shaft screen GÜNTHER SPLITTER Semimobil Used, year of construction 2012 Screen grain size 0/100 2-fraction star screen Cross discharge belt undersize splitter Extension web Horizontal cross feed belt Matching feed belt on splitter Blue-green conveyor belt approx. 5000 x 1000 mm LW Blue conveyor belt approx. 4500 x 1000 mm LW Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible Ltedpfx Aowhzccjansa To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 and stationary deck 0/60 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm Ltodpfxjwhza Ue Aanja - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) - Blue conveyor belt approx. 3000 x 1300 mm LW Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Ledpfxswhy T Tj Aanota Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, No. 10019 Various conveyor belts Used Consisting of 9 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 3: Blue conveyor belt, approx. 13000 x 1000 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 7: Blue Westeria conveyor belt, approx. 4000 x 1200 mm LW Ledpfxowhp H Ns Aanota Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Pos. 9: Green garbage truck loading conveyor belt, approx. 5000 x 1000 mm LW, at the height of a garbage truck to load it with garbage Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide Ltjdpfx Asw A Actsanoa The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Ltodpsv Hdg Nefx Aanja Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Lsdpfx Aaev Eyqbjnsta Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm Lsdou Agh Sepfx Aaneta 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Ledpfevxrynex Aanjta Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1999, No. 3076 STEGHERR NFT crossbar grooving machine used, year of construction 1999 Special milling machine for milling a groove on the top of rungs that have already been milled. Automatic workflow: The pre-milled rung is placed against the stop and centered. The milling process is started by pressing the bar against the stop. The milling unit moves up and automatically returns to the starting position after milling. milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Lsdpfx Aeiyp D Djansta machine ready to plug in. Including mobile stand. all tech. Details without guarantee, according to the manufacturer's brochure The sale is private, no VAT can be shown. Collection in 73430 Aalen Transport dimensions approx. 600 x 400 x 1500 mm LWH Weight about 60 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Payment before pickup or shipping Terms of delivery: ex site