Used Die Casting Machines for sale (68,207)

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Hnodpev Nzpgefx Airjk Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), nominal power: 7.5 kW (10.20 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,600 rpm, input frequency: 50 Hz, input current: 30 A, type of input current: three-phase, overall weight: 8,200 kg, total length: 3,320 mm, total width: 2,440 mm, total height: 2,130 mm, grump will follow shortly Hodewvbm Ropfx Aironk

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm Hodpfx Aox Ndu Deirjnk - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Hnodpsw R Eqbjfx Airjk • Frame opening (normal): 78.5 × 108.5

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Length: ~14020 mm Hodport Tw Dsfx Airsnk Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Hjdpfexpqy Dox Airjnk Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide Hedjw Iq Ugepfx Airenk - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Hsdpfx Aijwxtb Soronk Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Hnsdpswxtcpefx Airsk Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping Hnedpfx Aijwxtb Ejrok The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Hsdpfx Aew D E Rvsirsnk Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame Hnjdpfx Aijumuxxjrek – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. Hnsdpfx Asv E A U Nsirjk The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc.

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Hnjdpfx Aiowi Tmverok Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Constr. year: 1976 diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FN10/12-80 Constr. year: 2002/2024 Hsdjwi T U Tepfx Airjnk diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Hodpfowi Szxsx Airenk Make: HILGELAND Type: FN-6/60 Constr. year: 1990 diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm output - pieces/min: 450 Location: In our warehouse

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Hsdpfjvc Ha Rex Airsnk

Condition: good (used), Paint casting machine, paint casting station Hedpfoc R Iyaox Airsnk -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable Hnedei Eg Nkjpfx Airsk -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm Hnjdpfx Asc Uldrsirek -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm Hedpfx Ajx Avh Heirjnk CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Hodpfjb A H U Esx Airsnk -pneumatically operated -Year of manufacture: 1996

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Hnjdpfx Aoxyl Evsirsk

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Hnodpsb A Nc Hefx Airok -operated: pneumatically -Year of manufacture: 1995

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Hedpfx Ajxnkdgjirjnk Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m