Used Forge for sale (184)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Dkjdpfjw Slbvex Afpoh Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Dkodew Slkkepfx Afpeh Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts Dkodpfsw Smc Iex Afpsh * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation Dodpfxexw Ebxo Afpokh * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3230, overall weight: 1,22,000 kg, Vaccari PV410 Screw Press (1997) 1700 Ton Capacity Weight 122000kg Press Includes Electrotherm Vacuum Furnace for Heating Part 2 Robots for Loading/Unloading Parts and Components from Furnace to Press and Then Post Stamp Removal Vaccari PV Series General Description: Screw presses expressly designed for forging under severe conditions. Dkodpfox Ap D Iox Afpeh Preloaded structure, longer O-shaped ram and optimum guiding are specifications making these presses ideal for forging also special alloy, complex shaped pieces, with multiple sequences and with single or multiple-impression dies Furnace ref no. 77, Robot ref no. 1977 Fanuc R-30iB / M-10iA (2013) included with machine Sublocation - South Forging Press.

Condition: excellent (used), REMS TORNADO 2010 THREADER Dedpfx Aov T Trujfpjkh Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant year: NEW capacity: up to 140 t./h 1 year guarantee - calorific power of the fuel 9,600 kcal / kg, - material passing through the #8 (2,38mm) sieve is no more than 20%, - The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system. - Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support. Quadruple feed bin (two-by-two) with 3,80mm wide opening and a capacity of 6m3, completely designed to support the strains during the unloading of materials. Regulated floodgate for flow of aggregates. - Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins. - Feeding belts with 20\" wide canvas supported by 4\" rollers in \"V\" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp. - rotational external mixer - burner with fuel spraying by gear pump Kcal/h - Dry filtering system that consists of dust collecting system - Control system Sistex Other options and accessories Dkjdpehd I T Ssfx Afpsh Control system, control room, dust filter/dust collector Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Dksdpfx Afsxcnzropsh Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Model: HP 200 Dkedpfsycl Idox Afpeh Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories

Condition: new, power: 132 kW (179.47 HP), color: grey, Year of construction: 2026, GNR 800 Mobile Crushing Plant, one of our specially designed mobile stone crushing and screening plants 800 Series impact crusher that powers the plant Dsdpfxewfnnto Afpokh Type: GNR-800 Rotor Dimension: 1100x800mm Engine: 132 Kw. 1500 rpm Max Feeding: 1000 mm. The shaft is 4140 alloy forged steel. Bearings SKF is a trademark or equivalent type of heavy duty. Welded steel constructions include fixed chassis and engine Crusher pallets, ribs 16-18% Mn. + 2.2% Cralloyed Side wear plates will be 30 mm sheet metal. Reduction and high cubic material ratio Please contact us for detailed information about our facility.

Condition: used, Seppi M. H-SMO-B 125 Mulcher / Rotary Motor / Vario Flow / NEW / In stock & immediately available Price: €15,590.00 net / €18,552.10 gross Working width: 125 cm Total width: 140 cm Depth: 120 cm Height: 60 cm - Powerful and maneuverable implement for attachment to excavators or crawler vehicles, ideal for maintenance of embankments and fallow land - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 13 tons - Compatible with various attachment adapter plates - Designed for hydraulic motor drive, depending on the hydraulic flow rate of the carrier machine - Indirect V-belt drive with 4 V-belts - Drop-forged counter blades - Double-walled housing made of high-tensile steel - Adjustable discharge hood, rear with rubber guard - Reinforced support roller with double-taper roller bearings, height adjustable by 5 cm - Rotor wall thickness: 12.5 mm Dodpfsyfvquex Afpjkh - Front protection with chains - Color: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pcs, spare part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic flow rate in l/min (min-max): 60 – 120 OPT 099 Floating mounting (parallelogram linkage) OPT 372 Hydraulic 190° rotation device Optional: MS08 adapter plate incl. bolts and installation = €880.00 net 3 hydraulic lines required: feed, return, and leak oil. Unit is supplied without hoses or couplings as standard. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a very wide range of Seppi M. products for immediate delivery! Feel free to contact us. Upon request, we are happy to provide financing offers. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Seppi M. product range! Errors and prior sale excepted! Rental possible = Further information = New: Yes Contact Tobias Ebert for further details.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating mounting / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tons - Universal interface for mounting different adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: Housing with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motor depending on the carrier unit’s flow rate - 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 units, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Cylinder capacity in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 100–300 - Required hydraulic flow rate in l/min (min-max): 55–150 OPT 099 Floating Mount (Parallel Linkage) Dsdpfsyfvhyox Afpskh OPT 555 Pendulum Adapter 3 hydraulic hoses are required: pressure line, return line, and leakage oil line. Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a wide selection of various Seppi M. products available for immediate delivery! Mr. Herden (phone) is happy to assist you. Upon request, we are happy to provide financing options. We are an official sales and service partner for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of Germany’s largest commercial vehicle dealers. We supply the complete Seppi M. product line! Errors and prior sale excepted! Rental possible. = Further information = New: Yes For further details, please contact Tobias Ebert.

Year of construction: 2024, condition: used, Seppi M. BMS 125 Forestry Mulcher / incl. Rotator / Year of manufacture: 2024 / DEMO unit / in stock & immediately available / excellent condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power line corridors - Mulches shrubs and wood up to 30 cm in diameter - Suitable for excavators from 13 to 30 t - For mounting to various quick coupler plates - Designed for hydraulic motor drive depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Chain protection at the front - Chain protection at the rear - Sandwich-type skid shoes, height adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST inclined-axis piston motor - with automatic displacement regulation 60-80 cm³ and overpressure valve - displacement in cm³ (min-max): 60-80 - required pressure in bar (min-max): 200-350 - required hydraulic oil flow: 80-170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for rear hood opening Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net 3 hydraulic lines required for rotor: supply, return, and drain. An additional hydraulic circuit is required for the hood. Unit is supplied without hoses or couplers. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We carry a very large selection of various Seppi M. products available from stock! Mr. Herden (Tel. ...) will be happy to assist you. Financing offer available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. Dsdpfeyfvbgjx Afpekh We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the complete Seppi M. product range for you! Errors excepted...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotating Motor / MS08 / 5–10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-access locations - Mulches brush and shrubs up to 10 cm in diameter - For excavators from 5–10 tonnes - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine's hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Skids, height-adjustable, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forest rotor with fixed MINI DUO tools (2 carbide inserts) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22–45 cm³ and pressure relief valve - Displacement in cm³ (min–max): 22–45 - Required hydraulic pressure in bar (min–max): 150–250 - Required hydraulic flow in l/min (min–max): 40–100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net For operation, an independent hydraulic system is recommended. Three hydraulic lines are required: supply, return, and drain. Djdsyfvapspfx Afpokh For the hydraulic hood, an additional double-acting hydraulic connection is needed. The unit is supplied without hoses, connectors, or adapter plate. Mr. Herden (phone ...) will be pleased to assist you. Financing options are available upon request. We are an official sales and service partner for Seppi M., Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range! Subject to errors and prior sale! Rental possible New: Yes For further details, please contact Tobias Ebert.

Condition: new, axle configuration: 2 axles, For vehicle inquiries, Mr. Herden will assist you (by phone). Brian James Race Sport / High-quality, enclosed premium car transporter / Loading area length: 5.03 m / Permissible total weight: 3,000 kg / New vehicle Price: €23,390.00 net / €27,834.10 gross Dimensions and loading volume: - Loading area width (m): 2.1 - Overall width (m): 2.49 - Loading area length (m): 5.03 - Overall length (m): 6.9 - Loading area height (m): 0.52 - Interior height (m): 1.96 - Passage height (m): 1.88 - Overall height (m): 2.56 - Permissible total weight (kg): 3,000 - Maximum payload (kg): 1,685 Equipment: - Including forged steel coupling head with integrated high-security lock - Rear support stands - Electric winch with wireless remote control - Spare wheel - Alloy wheels - Front floor storage box - On-board battery with control unit (waterproof housing with control switches, battery level indicator and outputs for the winch and tipper drive, as well as a separate connection for charging the battery) - LED interior lighting - Lashing straps - Low-profile wheel chocks - Small front side doors - Split side doors We have a very large selection of various Brian James trailers available immediately from our stock! Mr. Herden (phone) will be pleased to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Brian James products! Subject to errors and prior sale. Internal No: 074570 = Further information = Gross vehicle weight: 3,000 kg Dkodpfx Afeyfu Ncspsh External dimensions: 0x2490x2560 Please contact Tobias Ebert for further information.

Year of construction: 2023, condition: used, Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / Demo Unit / Swing Motor / Year of Manufacture: 2023 / In stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests, and in other hard-to-reach areas - Mulches shrubs and brushwood up to 10 cm Ø - For excavators from 5-10 tonnes - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor depending on the oil flow of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid runners, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, Total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Dksdpoyfu H Iefx Afpjh OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29-58 - Required hydraulic pressure in bar (min-max): 150-250 - Required hydraulic flow rate in l/min (min-max): 60 – 130 OPT372 Hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and assembly = €880.00 net We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for the drive. Three hydraulic lines are required: supply, return, and drain. Additionally, a double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connectors, or adapter plate. We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker, DMS, Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, Iveco, and with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale! Internal No.: 170068 Rental possible = More information = Please contact Tobias Ebert for further details.

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Total width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavator mounting, for mulching along riverbanks, in forests, on railway lines, and other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10-20 tons - Suitable for installation on various mounting plates - Drive designed for hydraulic motor, depending on the carrier unit's hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge across entire hood length - Front and rear heavy-duty chain guards - Height-adjustable skid shoes, reinforced with hardmetal plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, spare part no. 176.02.005 OPT 465 M-BOOST Angled Axis Piston Motor - With automatic displacement control, 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60-80 - Required pressure in bar (min-max): 200-350 - Required hydraulic flow: 100-150 l/min Intermediate adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic power unit is recommended for operation. Three hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is additionally required for the hydraulic hood. The device is delivered without hoses, couplings, or mounting plate. We stock a large selection of various Seppi M. products, available for immediate delivery! Mr. Herden (by phone) will be happy to assist you. We can also offer you attractive financing options on request. We are official Seppi M. distributor and service partner. We are official Westtech distributor and service partner. We are official Gierking GMT distributor and service partner. We are official OilQuick distributor and service partner. We are official Weber MT distributor and service partner. We are official Holp distributor and service partner. We are official DMS distributor and service partner. We are official Magni telehandler distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. With over 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Djdpfeyfu Hzjx Afpokh Errors and prior sale excepted! Rental available. = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & immediately available Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulching attachment for excavators, designed for mulching along riverbanks, in forests, along railway lines, and other hard-to-access areas - Mulches brush and wood up to 20 cm diameter - For excavators from 10-20 tonnes - Suitable for mounting on various coupling plates - Drive designed for hydraulic motor, depending on carrier unit’s flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Adjustable, reinforced skid runners with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips each) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST Angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 80 - Required pressure in bar (min-max): 200 350 - Required hydraulic flow rate: 100 150 l/min OPT 372 hydraulic 190° rotating device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear cover For operation, an independent hydraulic system is recommended. The rotor requires three hydraulic lines: supply, return, and leakage oil. The unit is supplied without hoses, connectors, or mounting plate. Many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a wide range of Seppi M. products in our warehouse, all immediately available! Dsdpfxjyfryfs Afpokh Mr. Herden (phone) will be pleased to assist you. On request, we will be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to prior sale and errors excepted! Rental available New: Yes Please contact...

Year of construction: 2023, condition: used, Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / DEMO Unit / Year of Manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Shreds brush and woody material up to 10 cm Ø - For excavators from 5-10 tons - Can be mounted to various attachment plates - Driven by hydraulic motor (dependent on carrier unit’s hydraulic flow) - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter knives - Hydraulically adjustable hood - Continuous hinge along entire hood length Dkodoyfq N Espfx Afpoh - Front guard with chains - Rear guard with chains - Height-adjustable skid shoes reinforced with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts per tool) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic oil flow in l/min (min-max): 60–130 Intermediary adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. An independent hydraulic system is recommended for operation. Three hydraulic lines are required: pressure, return, and drain. A double-acting hydraulic connection is additionally needed for the hydraulic hood. Unit is supplied without hoses, fittings, or adapter plate. We are an official Seppi M. sales and service partner and also represent Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco as certified partners. With 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Seppi M. product range! Subject to errors and prior sale! Internal ref. no.: 170048 Rental possible = Further information = Please contact Tobias Ebert for more information.

Condition: used, Seppi M. BMS 125 Mulcher / NEW / In stock & available immediately Price: €35,190 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadways, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 t - Can be mounted on various adapter plates - Drive designed for hydraulic motor depending on the oil flow rate of the carrier vehicle - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Sandwich-style skid runners, height-adjustable, reinforced with a tungsten carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts Dodpfxoyfqp Eo Afpekh - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST oblique-axis piston motor - with automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 / 80 - Required pressure in bar (min-max): 200 / 350 - Required hydraulic oil flow: 80 / 170 l/min OPT 372 hydraulic 190° swivel device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Three hydraulic lines are required for the rotor: supply, return, and drain. An additional hydraulic circuit is needed for the hood. The unit is supplied without hoses or fittings. Numerous other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available for immediate delivery. We have a wide range of Seppi M. products available immediately in our warehouse! Simply contact us for details at . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the entire Seppi M. range for you! Subject to errors and prior sale! Rental possible = Additional information = New: Yes Contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m Dsdpoyfqpxsfx Afpekh - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - For mounting onto various adapter plates - Drive prepared for hydraulic motor based on carrier flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Adjustable, reinforced skid shoes with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22–45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22–45 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic flow in l/min (min-max): 40–100 Intermediate adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate including bolts and installation = €1,410.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drainage. Additionally, a double-acting hydraulic connection is needed for the hydraulic hood. The device is supplied without hoses, connectors, and adapter plate. Mr. Herden (Tel.) is happy to assist you. Financing options available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Rental available = Further Information = New: Yes Contact Tobias Ebert for further details.

Year of construction: 2023, condition: used, Seppi M. BMS 125 Forestry Mulcher / NEW / In stock & immediately available Price: €29,890.00 net / €35,569.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavators - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for cleaning gas and power lines - Shreds brushwood and timber up to 30 cm in diameter - For excavators from 13 to 30 t - Compatible with various mounting plates - Drive designed for hydraulic motor, depending on the carrier’s flow rate - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor shaft stubs OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60–80 cm³ and pressure relief valve - Displacement in cm³ (min–max): 60–80 - Required hydraulic pressure in bar (min–max): 200–350 - Required hydraulic oil flow: 80–170 l/min Three hydraulic hoses are required: supply, return, and drain. The device is supplied without hoses, fittings, or mounting plates. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Dksdsyfqbnjpfx Afpsh We have a very large selection of various Seppi M. products immediately available in our warehouse! Feel free to contact us for more information. We are happy to provide financing offers on request. We are an official Seppi M. distributor and service partner. We are an official Magni telehandler distributor and service partner. We are an official DMS distributor and service partner. We are an official Westtech distributor and service partner. We are an official JCB construction machinery distributor and service partner. We are an official Mercedes-Benz distributor and service partner. We are an official Iveco distributor and service partner. We are an official Holp distributor and service partner. We are an official OilQuick distributor and service partner. Additionally, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Seppi M. product range! Subject to errors and prior sale! Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Seppi M. H-SMO-B 125 Mulcher / NEW / In stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Robust and manoeuvrable attachment for excavators or tracked vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tonnes - Can be fitted to various mounting plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect V-belt drive with 4 V-belts - Drop-forged counter blades - Double-walled housing made from high-strength steel - Adjustable discharge hood, rear with rubber protection - Reinforced support roller with double taper roller bearing, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 Dedpfeyfp S Eox Afpekh OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic oil flow in l/min (min-max): 60–120 OPT 099 Floating attachment (parallelogram guidance) Optional: MS08 adapter plate including bolts and installation = €750.00 net 3 hydraulic lines required: pressure, return, and drain line. Unit is delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a very large selection of various Seppi M. products, available at short notice! Simply contact us at . We are happy to provide you with a tailored finance offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the full Seppi M. range for you! Errors and prior sale excepted! Rental possible = Further Information = New: Yes Contact Tobias Ebert for further information.

Condition: new, Year of construction: 2025, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, stroke adjustment: 150 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance Dkodpfx Afex N Nfbjpeh ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses that operate with force generated via an eccentric mechanism and are used in cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance for serial production. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-oriented design (light curtain + safety systems) - Reduced maintenance needs with centralized automatic lubrication - PLC control + dual hand/foot control for production-ready operation Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guidance • Spheroidal cast iron connecting rod and gear bushings • 4140 quenched and tempered steel crankshaft and transmission shafts • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Finger and hand protection with light curtain safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mountings • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare die plate • Decoiler, feeder, and straightener • One set of die to customer specifications • 8-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Bed-to-ram distance: 500 mm Slide-to-table distance: 540 mm Djdovtywdepfx Afpekh Distance between uprights: 500 mm Ram adjustment (stroke): 120 mm Approx. width: 1600 mm Approx. depth: 2280 mm Approx. height: 2750 mm Front anchoring size: 840 mm Side anchoring size: 1300 mm Bed bore diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Floor-to-table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.