Used circular saws for sale (117)

Condition: used, Year of construction: 2024, Squaring machine with tilting blade Motorized blade lifting Manual blade inclination Dcedpstl D Ensfx Aizop Technical data : anodized aluminum carriage mm. 3200/3800 main blade motor kW 5.5 scoring blade motor kW 1.1 max. blade diameter 350 mm blade tiltable at 45° max. cutting height with 90° blade 100 mm max. cutting height with blade at 45° 70 mm aluminum telescopic rod suspended "bridge" protection on the blade cutting width on the parallel guide mm.1500 dimensions of the fixed surface mm.1200x750

Condition: excellent (used), functionality: fully functional, LOESER AA 200 – Cross-cutting and chamfering machine for dowels Diameter range: 6–18 mm Ø Minimum dowel/rod length: 15 mm Djdpfx Asz R Tm Neizecp Output: approx. 2000 dowels/hour Motor power: 0.55 kW Cutting tool/blade speed: 7150 rpm

Condition: used, Year of construction: 1998, Hydraulic chainsaw Dcedpfsyngb Asx Aizjp Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Double stroke cutting capacity: 600/120mm Command by double buttons Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Machine footprint: Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable Dcodpfx Ascbq Nwsizsp saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Dsdpezf H Hrsfx Aizjcp Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, power: 5.5 kW (7.48 HP), main motor 5.5 kW saw can be lowered up/down saw set at an angle of 45 degrees side carriage with aluminum guide table top 100×90 cm Maximum saw diameter 400 mm Dsdpfxoqwg Dws Aizecp Belt adjustable saw rotation 3000/4000/5500 rpm

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, cutting width (max.): 610 mm, saw blade diameter: 600 mm, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: Dsdpfx Aox Ekmrsizocp - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm - Weight: 600 kg

Condition: used, Stromab Mitre Saw for Boards up to 250 mm, Height 100 mm Djdornbnkopfx Aizocp

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm Dodpfeqwduxsx Aizecp table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: used, Year of construction: 2018, Saw blade diameter: 190 mm Year of manufacture: 2018 Power: 1200 W Speed: 5200 min-1 Dodszywzpepfx Aizocp Includes saw blade, 230 volts. Condition is good. Price: € 75,- including VAT, multiple units in stock.

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: Dodpoyx S N Uefx Aizjcp POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: good (used), 5kW motor Ability to cut at an angle Solid cast iron Dodoqwdxujpfx Aizscp

Condition: used, Vesto saw with two discs for sale Dodpfjtqt T Isx Aizjcp - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: excellent (used), Year of construction: 1975, max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm Dcedpfx Aoqwdw Noizep dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 4 kW (5.44 HP), max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm Dedpfxoqwdwzs Aizecp dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: good (used), 3 cutting units Saw blade diameter: 550 mm Dcodpsxvmq Sefx Aizep Max spacing between outermost blades: 10 m Motors: 3 x 3 kW 2-stage feed Power supply: 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Dsdpfx Aoxcwwpeizscp Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 550 mm, total length: 4,920 mm, total width: 1,450 mm, total height: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, OMEC TA185 band saw Maximum cutting height: 180mm Maximum cutting width: 900mm Saw blade diameter: 550mm Pneumatic material clamping Dedpfozu R Hhsx Aizjcp Pneumatic saw blade feed Saw blade control via two buttons Main motor power: 5.5kW Machine dimensions: 492x145x120cm (H) Weight: 600kg

Condition: used, functionality: fully functional, Crosscut saw with marking recognition. With this saw, cross-sections of 300 x 60 mm can be cut. It was previously used in front of a compact finger-jointing machine to cut out defects according to markings. These feed units are very good and ensure safe transport, as the lower rollers are pneumatically connected (coupled) with the upper ones. Dodpjwxm Eqjfx Aizscp

Condition: used, Cutting length 3000mm Cutting height 160mm Advance speed by electronic variator Djdpszbxxmjfx Aizecp Guide with programming Motor 15kW 400V

Condition: new, Cutting height 175 - 210 mm Motor output 15 kW Dcjdpfxez St Sas Aizjp cutting width 620 mm Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: used, Cutting length 400cm Width 600mm Retractable blade Electrical guide Dodpezbxwvsfx Aizscp Digital display 400V

Condition: new, Cutting height 175 mm Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Dedoz St R Ajpfx Aizscp Dimensions (L/W/H) 7000 x 1470 x 850 mm

Year of construction: 2008, condition: like new (used), main engine 3.9 kW trolley length 1370 mm disc diameter 300 mm angle adjustment 0 - 45 " height adjustment Dcodpfxemi Nz Do Aizjp cutting height max 90 mm two types of disc rotation speed 3700 and 5000 RPM

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Timber Saw 8 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Djdpjmccnlefx Aizocp Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 8 m Linear Unit: ProfiStop Omicron Material Length: 7230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.