Used jointer planer & thickness planer combinations for sale (158)

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - Djdpfsu R Sztsx Addewf TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: good (used), Year of construction: 1967, Kupfermuller Lignum double-sided thicknesser Kupfermuller Lignum double-sided thicknesser. Stable construction. The machine has a planing width of 630 mm and 4-knife shafts. The machine has a processing accuracy of 0.1 mm. The planing height is 180 mm. The machine has steel rollers mounted in a table with its own drive, that is, active split rollers. The machine is therefore ideal for planing wet and dry wood for gluing. Net price. VAT invoice, machine with electrical cable covers and stop buttons on both sides, ready to go. Stable cast iron construction. Weight of about 3 tons. The machine does not require any financial outlay. Dsdpetzcmtofx Addewf

Condition: used, Scheppach 260 planer-thicknesser, good condition, 2.2 kW, 2 knives, approx. 80 kg Djdpfowzzd Hex Addowf Prices subject to change; errors, misprints, and typographical mistakes excepted.

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Djdpevwd U Ijfx Addowf

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Dwedpfx Adswrcd Nedof Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: excellent (used), 5.5 kW motor Djdpfx Adowm Dz Sedewf Table length 2 m Table width 52 cm 4 blades Working height 19 cm Electrically adjustable top and bottom

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Dwjdpfx Adou R S Awsdef Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: good (used), Year of construction: 1991, max. planing width 520 mm max. planing height 200 mm 4 cutterblocks Dwjdpfx Adjiwi Ezsdjf slotted table lips electr. height adjustment with trolley with knife setting gauge

Condition: used, AD planer, good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 265 kg Price changes reserved, errors and misprints reserved. Dedpfowzzd Tex Addswf

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: Djdpowwv Ufefx Addowf - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, Dwjdpfxjvwgh Re Addsf without guarantee or warranty

Condition: used, machine/vehicle number: G-ADHM115775cP, AD planing machine Holzprofi STÖ410, 410 mm planing width, 4 blade shaft Djdpfx Ajvw Ebijddjwf Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Dsdpfxjvwgc Ue Addjwf

Condition: used, machine/vehicle number: G-ADHM132618bH, AD planing machine Robland XSD 310, year of manufacture 2000, very good condition, including slotted board, 2.5 kW, 1400 mm table length, 310 mm table width, 3 knives, 250 kg Prices subject to change, errors, printing and typesetting errors reserved Dodpfjvw Ebvsx Addswf

Condition: used, AD planing machine Holzprofi STÖ410V, year of manufacture 2000, good condition, 2.9 kW, 410 mm table width, 4 knives, 430 kg Prices subject to change, errors, printing and typesetting errors reserved Djdpfovr I Hkox Addswf

Condition: as good as new (ex-display), With strip knife, demonstration machine Surface planer: Table dimensions 1800 x 410 mm Max. chip removal 5 mm Planer shaft diameter 100 mm Number of planer knives 4 pieces Thickness planer: Table dimensions 700 x 406 mm Max. clearance height 230 mm Max. chip removal 4 mm Feed speed 8 m/min Motor output 3.8 kW -S6 (3 kW S1) Dwodevrvnvopfx Addjf Weight 450 kg Symbolic photo

Condition: new, The new combined planer and thicknesser FSN by Holzprofi convinces with a solid construction, a strong cast iron table,a grounded surface and a modern handling. The machine is space-saving and very comfortable at changing from planing to thicknessing. The profi aluminium fence is 45° rotable and guided on the transverse side. A mechanical LCD-display guarantees a perfect reading of the thicknessing height. CE conform, Made in EU Spiral cutterblock for cutting insert HM15x15x2,5 mm R95 three row arrangement of the 66 cutting inseres incl. torque key. Technical Data: planing: Working table dimensions: 1800x410 mm max. cutting depth: 5 mm planer shaft diameter: 100 mm Dsdpfx Adovrvbpsdowf cutter knives: 4 thicknessing: Working table dimensions: 406x700 mm max. cutting depth: 4 mm feed speed: 6m/12m/min motor power: 5 kW S6 400V (4kW S1) weight: 450 kg Accessories optional: mortising unit

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Dwedpevrvmxsfx Addef Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Dwsdjvrvkdspfx Addsf Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Large planing shaft diameter for a very nice planing result Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 95 mm Planing width 400 mm Length planing table 1660 mm Admission height 230 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 410 x 600 mm Max. chip removal Dwjdpsvrvz Njfx Addof (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 334 kg Optional accessories: Moving device Service check for spiral cutter block

Condition: used, AD planing machine Holzprofi KDR410V, year of manufacture 2000, good condition, standard equipment, including transport device Dodevrvkkepfx Addowf Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Technical data: Dedpfovrvvyjx Addjwf Total table length 2350 mm, thicknessing table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, planing stop swivels 90° - 45°, feed speed 6/12 m/min, max. chip removal 6 mm, motor output 5.5 kW (7 kW S6), weight 920 kg, with automatic star-delta connection.

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Dwedpfx Adewzzfkodjf Subject to price changes, errors, and misprints.

Condition: new, machine/vehicle number: M1-ADM310G-Spiral, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Djdpfx Adsvw Edwodewf Optional accessories: moving device

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Dsdpfx Asvw Ebpsddjwf Prices subject to change, errors, printing and typesetting errors reserved