Condition: excellent (used), Griggio T45S angle milling machine! Ibedpfxjrz Immj Aabec Diameter of the spindles 35mm Total height of the spindle 160mm Spindle speed variable on belts Spindle rotation: 3000/4500/6000/8000 3kw main motor Manual lifting of the spindle Spindle height readout Spindle tilting at an angle of -5°+45° Ce certificate Weight 400kg

Condition: used, Lot (approximately 30 pieces) of various cutters and cutter combinations, primarily from Leitz for MEC feed or without markings. Ibjdpew U Ay Isfx Aabjc mark: Without or MEC

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: Holz-Her 3 rolls -Speeds: 3,000, 5,000, 6,000, 10,000 rpm -Dimensions: 1220/770/H1650 mm Ibodpjcp Txwjfx Aabjc -Weight: 588 kg

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45 Height and swivel adjustment by handwheel Dial gauges in handwheel motor power 7,0 kW 4 speeds 30mm milling spindle Aluminum stop jaws Milling fence with crank adjustment Long cast iron tables Ibjdpfsipv A Tox Aabec Safety rulers

Condition: like new (used), Tool cabinet with approx. 130 CNC tools, including tool holders (HSK/SK40), milling cutters, drills, taps, boring tools, as well as special tools and face mills. Isdpfx Aaoxap H Dsbjbc

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. Ibsdpfx Aajv Er Nijbjc With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Isdpfx Ajtgkwfeabobc Pneumatic

Condition: used, spindle diameter: 40 mm Iedpfx Aajw Uy Nasbebc clamping length: about 170 mm

Condition: new, Year of construction: 2024, Panel thickness (min/max) 5/50 mm Iodpfx Aoq Ivmujabebc Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), Year of construction: 2007, Main Drive Number of axis 3 Additional Equipment Vacuum pump: 90 m³ Main Drive Number of axis 3 Additional Equipment Vacuum pump: 90 m³ This 3-axis MASTERWOOD Project 315 was manufactured in 2007. A robust CNC router with a working size of approximately 120 x 280 cm, it features a 12-slot changer and a powerful vacuum pump rated at 90 m3. The computer was updated in 2023, and the axis control was renewed in 2018. If you are looking to get high-quality milling capabilities, consider the MASTERWOOD Project 315 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining Ibjdpfxsw S N Its Aabjc

Year of construction: 1977, condition: good (used), swivel head, top-down adjustment of the table top, two types of speeds: 18,000 and 24,000, overall dimensions: height 1570mm, width 1170mm, length 1150mm, Ibedpfx Aoicld Toabsc

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Ibsdpfx Ajw Tfx Reabsc Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: new, functionality: fully functional, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, input frequency: 50 Hz, input voltage: 400 V, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Ijdjxd Si Aopfx Aabebc Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: used, Year of construction: 2019, No. 3240 Spindle moulder SCM minimax t 45c Used, year of construction 2019 Spindle moulder with fixed milling spindle for large workpieces Table extensions left and right, extendable roller support Milling spindle with right-left rotation With suction hood under the worktable for better suction Motor 5 kW Worktable length including extensions approx. 1950 mm Worktable width 400 mm Useful length of the milling spindle 100 mm Spindle speeds 3500 / 7000 / 10000 rpm Spindle arbor diameter 30 mm Suction nozzle diameter 2 x 120 mm Including 4-roller feed unit Transport dimensions approx. 1950 x 800 x 1500 mm LWH Weight approx. 250 kg Sale on behalf of customer, ex location near 73479 Ellwangen, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Iedpfx Aasw Srzijbsbc Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2004, condition: refurbished (used), 2004 Double squaring machine, Friulmac brand, Idramat model Isdpfx Aajpfp Ezjbsbc Note: see [VIDEO](?share=copy#t=0)

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - S/N 73 - CE rules (year 1997) Isdpfehz Dlbox Aabobc

Condition: used, Year of construction: 1996, Used machine Ijdpfx Aowwxzheabebc Year of manufacture: 1996 The basic principle of Hofmann machines is the proven cast iron construction. Grey cast iron is by far the leader in vibration damping, compressive strength, and load capacity. Milling arbor 30 mm with right and left-hand rotation Milling fence with stop jaws and central adjustment, as well as single-sided fine adjustment of the jaws Table size: 1200 x 820 mm Manual height adjustment with digital display and zero reset button Table height: 890 mm Motor power: 5.0/6.2 kW Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 125 mm Chip extraction port: 110/120 mm Equipped with Holz Her 2-roller power feed unit Weight: 850 kg Photos show the machine in its non-refurbished condition! Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1995, machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - Double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti Iodeqmnidspfx Aabobc - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 - Year 1995

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES Iedswrh Iyopfx Aabjbc - Year 1997

Condition: used, Year of construction: 1997, machine/vehicle number: AB/109677, SECOND-HAND SPINDLE MOULDER SCM MOD. T130N - CE RULES - S/N AB/109677 - Year 1997 Technical specifications Spindle diameter 50 mm Spindle height 180 mm Height adjustment; useful stroke 140mm Rotation spindle speed: 3.000 / 4.500 / 6.000 / 7.000 / 10.000 Ibodpfxswrh Nks Aabec Maximum tool diameter 250 mm Table top dimensions 1200 x 730 mm Height from base 925 mm Voltage 400V, 3 phases, 50 Hz, 12 A Motor power 5.5 kW Dimension 1200 x 1000 x 1400 mm Weight 600 Kg

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 Iedpfxjwrh Hvo Aabebc - Volt 400/50 - S/N 9813 - Year 1998

Condition: used, ROD MILLING MACHINE LOSER MOD. DK110 - Diameter capacity: 6 - 18 mm Ø - Feeding speed: 4 -7 m/min Ibsdpfx Ajwrfkrsaboc

Condition: used, Year of construction: 2001, SECOND-HAND DOUBLE SIDED PROFILE SHAPER AND SANDER FC8CN - CE RULES - UNIT 1-2: milling units 15 Kw - UNIT 3-4: milling units 11 Kw - UNIT 5-6: milling/shaping units 4,5/3,3 Kw - UNIT 7-8: sanding units 3 Kw - Working height mm. 180 - Working lenght mm. 2500 - N. 8 pneumatic pressers Isdpfxowrfine Aabobc - CN OSAI control - Yaskawa drivers - Program CAM210 - 4 sided cabin - Year 2001

Condition: used, Year of construction: 2001, SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - Positions 1-2 milling units - Positions 3-4 milling units - Positions 5-6 sanding units - Positions 7-8 sanding units - Positions 9-10 trasversal sanding units - Working length mm. 2500 - Working height mm. 180 - N. 10 pneumatic locking cylinders - S/N 0 133 H2 - CE rules (year 2001) Iodpfx Asmxglheabobc

Year of construction: 2000, condition: used, SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 Iedpfxeikz Rfs Aabsbc - unit 1-2: milling units - unit 3-4 milling units - unit 5-6: sanding units - unit 7-8: sanding units - working height mm. 180 - max. working length mm. 2500 - 8 locking cylinders - cabin - S/N 1481 - CE year 2000