Condition: used, Shelf Press Tiger TM/6 Shelf length: 300 cm Isdpfx Ajx S Nbbjbcjap Width: 130 cm Clearance between shelves: 650 mm Nice, straight aluminium shelves Water heating system; the machine has its own heaters and circulation Option to connect to external central heating Piston diameter: 85 mm, 6 pistons Emergency stop switch (pull cord) Pressure: 5 kg/cm2 Weight: approx. 6.5 t

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how Isdpfjgl Nlmex Abceap + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Iodpfeymyl Sjx Abcjap Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Year of construction: 2006, condition: used, Technical data: Type: P2M L 24/09 Year of production: 2006 Factory number: 94600105 Iaedpog Ty Twsfx Abcep Voltage: 400 V Frequency: 50 Hz Power consumption: 53 Kw Current: 81 A Weight: 8150 kg Machine Dimensions : Machine width : 410 cm Machine length: 160 cm Machine height : 330 cm Dimensions of control cabinet: Width of control cabinet : 100 cm Length of control cabinet: 50 cm Height of control cabinet: 160 cm

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Iaodpfxeymmgij Abcsp Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, workpiece height max. 2.320 x 1.010 mm output 33 kW Iajdpfx Aow Na Uljbcop Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system

Condition: refurbished (used), functionality: fully functional, Refurbished four-cylinder hydraulic flat press of Italian manufacture. Branded multi-layer press for easy wood veneering. Ijdpfx Ajyi U Rnobceap Veneering plate dimensions: 2500 x 1300 mm Plate opening: 400 mm Pressure over full surface: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic cylinders: 4 MYLAR Teflon foil on the plates Prepared for water heating of the plates Option to install a hot water boiler Price: EUR 7,200 ex VAT The overhaul status and readiness of the machine for collection must be checked in advance! In stock in Telnice near Brno, Czech Republic Testing, machine demonstration, and operator training are included as standard.

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Iajdjimv N Tspfx Abcep

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Iodpfx Aod Nm Sisbcoap Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Iaedpoxfwdefx Abcsp Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Iaodpfxjd Nnwlj Abcsp Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: as good as new (ex-display), Year of construction: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine Including control cabinet with timer operation The press is switched on manually and will run until the set time on the timer (e.g. 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square), Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H), Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Iajdpfx Asfci D Asbcjp Motor: 2.2 kW, 400 V, 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% ATRO - Sand, stones, metals, and minerals increase wear --- Optional upgrades (at extra cost): - Timer function + €490 net Machine is started manually and switches off automatically after preset time X. - Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt version Motor then 3 kW instead of 2.2 kW Surcharge + €690 net (delivery time approx. 8 weeks) ---

Condition: new, Year of construction: 2023, total width: 1,300 mm, total length: 3,000 mm, pressing force: 120 t, opening width: 400 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system * machine control from touch panel Iaedpfxsqu U Hqs Abcep * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Year of construction: 2024, condition: new, functionality: fully functional, Hydraulic pressure gauge, pressure indicator 500 bar Application: - shelf presses Specification: - indication range from 0 to 500 bar -max working pressure - 300 bar - large display with a diameter of 116mm - fi inside 104mm - depth without valve 57mm - depth with valve 97mm Iaedpfjthiddox Abcsp - additional contact for automatic pressurization to the preset value Additional information: - the photos shown illustrate the actual condition of the object of sale - the price given in the auction is a net price

Condition: used, Collar spreader for battens Iaodpfsyknlbox Abcjp

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 1,00,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Ijdpfx Aboqai H Tscoap Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Iaedpfslt Ugtex Abcjp Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: used, Year of construction: 2010, functionality: fully functional, Two used briquetting presses from Pawert SPM / 3 briquetting presses from DI PIÙ The Pawert presses include, according to the following specifications: - 2 steel sheet silos, each with approx. 20 m³ usable volume, including silo discharge system - 1 briquetting press, make SPM PAWERT AG, type 84/1 - 90/200, machine no.: 1060, power 55 kW - 1 briquetting press, make SPM PAWERT AG, type 96/1 - 90/200 SBP, machine no.: 1140 - Complete conveyor system including 2 cooling lines, conveyor belts, roller conveyors, etc. - 2 cross-cut stations - 1 noise protection cabin for cross-cut saws - 1 feeder, make KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, make KALLFASS, type Super Wrap 650 - De Luxe - inline, machine no.: VD 03.08.445, year 2000, incl. shrink tunnel - Accessories: control and power cabinets, PC controls, frequency converters - Spare parts according to appendix 1 Plant boundaries: - Material infeed: flange of chip conveyor in chip container before the presses - Power supply: input terminals in Pawert control cabinet _____ Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Pressing force: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total installed power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press — Equipment: Material hopper Feed screws Hydraulic system Control cabinets Saws for briquette length cutting Protective cladding & safety systems Discharge units — Iaedpfx Absyiyhfjcsp Scope of delivery: 3 complete briquetting presses Di Più MB100 Saws Conveying technology & accessories Spare parts by agreement — Areas of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: can be organized by arrangement Price: on request Available for individual sale or as a complete package

Year of construction: 2026, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Iasdpfxsgp I Ups Abcjp Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2025, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. SIEMENS LCD control, maintenance-free operation of the machine. Processed materials: Iodpetvmf Nofx Abcoap • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens

Year of construction: 2000, condition: ready for operation (used), Columbus C S Contura Iajdpfsvg Inkox Abcop Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: excellent (used), The briquetting press has been fully refurbished by the manufacturer. Iaodpfxotianfj Abcsp Technical specifications: Briquette diameter: 70 mm Hopper diameter: 1200 mm Maximum briquette length: 70 mm Throughput: ~70 kg/h Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 2100 mm Height: 1600 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Iajdpfx Abjxzqmzocjp Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: used, Technical data: Iaedpfsxxxawsx Abcsp Briquette diameter: 70 mm Briquette length: 70 mm Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Throughput: 70–120 kg/h Power supply: 400 V Motor power: 11 kW Safety switch

Condition: excellent (used), Technical specifications: Number of pistons: 6 Iodpfx Abjw U Nvpoceap Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm