Used spindle moulders / table mills for sale (162)

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Nledpeyy I R Rofx Ahnjf Tilting spindle With table extension on both sides

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of the table opening: 480/380/170/125 mm - Taper of the milling spindle: MK 5 - Speed of the milling spindle: 3000 rpm - Height adjustment range of the milling spindle: 150 mm - Distance from milling spindle centre to front table edge: 400 mm - Largest permissible tool diameter: 250 mm - with wooden stop jaws (can be exchanged for metal stop jaws on request) - with Holz-Her 3-roller feed unit - with heavy sliding table; runs on ball bearings on absolutely parallel-milled guideways Nedpfxjzlbqxo Ahnelf - Weight: approx. 800 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, A Bäuerle SFM-type rigid table router or rigid router for profiling and routing timber. Technical data: Nledpfx Ahjzryrbsnsf - Spindle diameter: 30 - Direction of rotation: Left and right - Motor: 3 kW

Condition: good (used), Year of construction: 1968, Fully functional milling machine with integrated sliding carriage for tenoning. Description: Nledpfjy Dctnjx Ahnef - Sturdy cast machine body for low-vibration operation - Sliding carriage for cross feed - Height adjustment via handwheel - Fixed milling spindle - Connection option for extraction - Milling spindle tool holder / diameter 30 mm - Milling spindle tool holder / diameter 40 mm - The fence can be flexibly adjusted/rotated without changing the measurement. - Spindle speeds: 3000 and 6000; 4500 and 9000 rpm - Motor bearings replaced around 2003. Additionally: ELU feed unit type MVA 2+ with 2 speeds, forward and reverse. Transport dimensions approx. 1100 x 1100 x 1800 mm Technical data on request All information without guarantee!

Condition: used, Year of construction: 1981, Second-hand machine Year of manufacture: 1981 Features and technical specifications: - with dual pneumatic lifting spindle - Mandrel diameter: 40 mm - with a long table length: 2500 mm Nljdpfx Ahezk N Dqenef - with extendable frame support - with milling stop featuring Panhans metal stop jaws and fine adjustment Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Weight approx. 700 kg Nsdpjzlbpuofx Ahnjlf Availability: by arrangement Location: Flörsheim

Condition: used, functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, table width: 1,070 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 3,000 rpm, – very good condition – manufactured in Poland Njdjw Ip Dmepfx Ahnolf – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Nedpfezlw Rnjx Ahnolf Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: excellent (used), Year of construction: 1994, power: 5.5 kW (7.48 HP), SPINDLE MOULDER GRIGGIO T270 WITH 2-POSITION TENONING SLIDING TABLE RIGHT-HAND SIDE EXTENSION Nlsdpfx Ahjznnx Ijnof ADJUSTABLE FRONT SUPPORT BAR ADJUSTABLE SPEED FEEDING DEVICE WITH 4 ROLLERS 40 MM DIAMETER SPINDLE WITH 270 MM USEFUL LENGTH 190 MM USEFUL DEPTH OF TABLE CUP MAXIMUM SIZES OF THE TOOL ALLOWED UNDER THE WORKING TABLE: 320 X 190 MM HANGING CONTROL PANEL WITH ELECTRONIC HEIGHT PROGRAMMER 8 SPINDLE HEIGHT SETTING POSITIONS LOCKING SPINDLE LEVER WORKING TABLE SIZE: 1850 X 730 MM MAXIMUM OPENING OF FRONT ADJUSTABLE SUPPORT BAR: 330 MM WORKING TABLE HEIGHT: 900 MM SPINDLE USEFUL LENGTH: 270 SPINDLE STROKE: 250 MM SPINDLE DIAMETER: 40 MM SPINDLE ROTATION SPEED: 3000-4500-6000-8000-10000 RPM TABLE RING DIAMETER: 115-170-220-270-350 MM MOTOR POWER: 7.5 HP 2-POSITION TENONING SLIDING TABLE – WORKING TABLE SIZE: 900X300 MM TILTING: -60° +60° STROKE: 1300 MM NET WEIGHT: 900 KG VERY GOOD CONDITION

Condition: used, Technical specifications: Spindle diameter: 50 mm Replaceable spindle Spindle speed: 3/4.5/6/9 thousand RPM Spindle adjustment: up/down Njdozilqwopfx Ahnelf Starting method: star/delta Rotation direction: left/right Power supply: 380 V

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Nledpfsxrbihex Ahnsf Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: excellent (used), Casadei F250M Tilting Spindle Moulder Spindle height and angle adjustable electrically from -5° to +45° 40 mm diameter spindle Nedpfx Ahsyt Hpkonolf Long tables 240 cm with extension Adjustable fence with AIGNER guides 4-roller power feed 5 spindle speeds 7.5 kW motor Forward/reverse rotation Spindle lock Brake Very good condition, machine inspected and fully ready for work. Dimensions: width 263 cm, depth 140 cm, height 196 cm, weight 900 kg

Condition: used, A Klein & Söhne rigid table router or rigid router for profiling and routing timber, fitted with an Aigner integral stop. Technical data: Nodpfozryqdsx Ahnslf - Spindle diameter: 30 - Clamping length: approx. 120 mm - Speed (milling cutter): 3,000/4,500/6,000/9,000 rpm - Direction of rotation: anti-clockwise and clockwise

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm Nljdpfx Ajzk Nnpohnjf - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 1988, Spindle moulder Manufacturer: Chambon Model: 323 C Year of manufacture: 1988 Table size: 680 x 1,000 mm Motor power: 4 kW Nljdjyia Tfjpfx Ahnsf Spindle diameter: 30 mm Speeds: 3,000/4,500/6,000/8,000 rpm Max. tool diameter: 200 mm

Condition: used, Second-hand machine Features and technical specifications: - Vertical travel of the spindle: 150 mm - Spindle diameter 30 mm - Spindle speeds 3,500–7,000 rpm - with rigid spindle - Motor 2.5–3.1 PS - Table 830 x 700 mm - Slotted discs up to 340 mm - with metal-jaw milling stop (Please note: the Aigner parallel guide shown in the pictures is not included in the scope of delivery!) - with 3-roller feed mechanism Weight: 240 kg Nodpfxszk Nt Ss Ahnslf Availability: at short notice Location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: AB00017920, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, overall weight: 510 kg, height adjustment type: mechanical, milling spindle length: 180 mm, spindle stroke: 90 mm, working height: 923 mm, Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front Nodpfjwwkqhox Ahnolf - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Condition: used, Technical data: Spindle diameter: 30 mm Spindle height: 160 mm Speeds: 3000/4000/6000/8000 rpm Manual spindle height adjustment Spindle lock Worktable dimensions: 900x1100 (2400) mm Adjustable fence arms Motor power: 3 kW Power supply: 380 V Overall dimensions: Nlsdpfxey R Sqve Ahnjf Length: 2400 mm Width: 900 mm Height: 1100 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ROBLAND T120 TL Year of construction 2008 Manufacturer Robland Table milling machine with trunnion table spindle diameter 30mm spindle length 180 mm Motor power 7,5 PS (5,5kW) Table size 2540 x 710mm with table extension ruler Table height 930 mm Height adjustment 205 mm Number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 Dimensions of the dispensing table 760 x 500 mm Diameter of the suction nozzle 120 mm Voltage 3 x 230V / 3 x 400V Nlodpfx Astukp Tshnof Weight 1070 kg CE marked

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Equipment and technical data: Nlodpfx Aew I Uriehnef Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Availability: Short-term Location: Flörsheim

Condition: excellent (used), RUWI Kombi-Unterflurfräse – Professional Under Table Router – Made in Germany Manufacturer: RUWI GmbH (Germany) Model: Kombi-Unterflurfräse Year of manufacture: 2013 Power supply: 230 V / 50 Hz Price: €1,750 (Negotiable) Professional RUWI under-table router, manufactured in Germany. A robust and precise machine designed for professional woodworking, furniture production and joinery workshops. Features • Original RUWI machine • Heavy-duty steel construction • 230 V power supply • Smooth and precise operation • Suitable for profiling, grooving, edge shaping and general routing work • Compact design with high stability • Made in Germany Condition • Fully functional and ready to work. • Well maintained. • Can be inspected and tested before purchase. Nlodezmunyjpfx Ahnef

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, spindle diameter: 30 mm, Equipment: CE marking, Spindle moulder with extended tables "SCM" model T130 LL Code: TOU-056 USED, IN EXCELLENT CONDITION – V380/50 – “CE” Spindle diameter: 30 mm Extended tables – total length 2560 mm Njdpsy E I Dnefx Ahnslf FAST table Expandable fence for wide workpieces Motorized spindle group height adjustment INVERTER for speed adjustment up to 10,000 rpm Spindle rotation reversal Motor power: 5.5 kW

Condition: used, total length: 1,150 mm, total width: 900 mm, total height: 1,800 mm, Colour: Green Empty weight: 400 kg Njdpfx Ahsy Nc Aaonelf - Documentation available: No - CE certificate present: No - Spindle diameter [mm]: 25 - Table length [mm]: 1150 - Table width [mm]: 900 - Tiltable spindle: Manual - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Tool key included: Yes - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 1400 - Max. spindle speed [rpm]: 1200 - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 1150mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1985, Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg Nedpfxecnpxno Ahnjlf

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Nedpfxew Enw Ij Ahnslf