Used Tool milling machines - univ.conv. 0-399mm X-axis travel for sale (112)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Kjdpfjwffymsx Aabenc Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Ksdop Sqyuspfx Aabjnc Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm Knedpfew A Ap Hex Aabsc z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Ksdpfxsumcmqj Aabenc

Condition: good (used), Universal milling machine MACMON - M100 -Traverse paths X/Y/Z 310x340x170mm -Speed range 40-2500 rpm -Automatic feeds -Speed range 50-2500rpm -Tool holder ISO 40 -Vertical head - Swivable -Horizontal - vertical milling device -Rigid angled table 600x215mm -Cooling system -Drive power 2.5 KW Knodpfxewtbpae Aaboc -Documentation Dimensions: LxWxH 1.5x0.7x1.7 meters / Weight 900Kg Errors / input mistakes reserved

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  Knsdpfx Ajrgvbpsabjc -)coolant equipment -)machine lamp Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Knjdpfx Aajwffzksboc Spindle taper vertical ISO 40 Control CONTOUR 2

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake Knedpfxef E Ilzs Aaboc - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system Knjdpew A Apyjfx Aabsc - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Kodpfxerhzcus Aabonc

Condition: good (used), Universal milling machine - MACMON M100 -Digital display -Traverse paths X/Y/Z 310x340x170mm -Speed range 40-2500 rpm Knedpfx Aewm I Atjaboc -Automatic feeds -Feed range in steps 9-450mm/min -Tool holder ISO 40 -Swivel vertical head -Horizontal / vertical milling device -Drilling quill 70mm -Rigid angled table 600x215mm -Cooling system -Chip tray -Work lamp -Machine feet -Drive power 2.5 KW -Documentation Dimensions: LxWxH 1.5x0.7x1.7 meters / Weight 900Kg Errors / input mistakes reserved

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition Technical data: >> Year of construction 1979 Machine no. 2202-10777 >> Rigid angle table (newly planed) >> Speed: 25 - 2500 rpm >> Feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:2,2 KW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant device >> Central lubrication To the machine : We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power. Knedpfxeuc Ubwe Aabec

Condition: good (used), Tool Milling Machine DECKEL FP 1 -Travel X/Y/Z 245x150x340 mm -Rigid angle table 600x210 mm -Tool holder MK 4 -Collet chuck, incl. collet set -Speed range 95-1900 rpm / 12 steps -Feeds X & Z axis Knodpfow I Ty Sjx Aabsc -Horizontal / vertical milling attachment -Quill movement – vertical milling head approx. 60 mm -Vertical milling head swivels +/- 90 degrees -Machine feet -Various tools, see photos -Documentation Dimensions: LxWxH 1.1x0.9x1.7 meters / Weight 650 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: >> Year of construction approx. 1990 Machine no. 2102-5231 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Knsdpfx Aasu Rn Tlobjc >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Tool milling machines DECKEL FP1 - Travel paths X/Y/Z 245-150-340mm - Without vertical head / Machine was only used for horizontal milling work - Speed range 95-1900 rpm - Built-in rotary table - Automatic feeds X & Y axis - Various collets Kedpfx Aajwpruxjbonc - Documentation Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight 650Kg Mistakes / input errors excepted

Condition: like new (used), Year of construction: 1987, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: Knsdsu R D I Sjpfx Aaboc >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Tool Milling Machine DECKEL FP 1 with 3-Axis Active Digital Readout TNC 113 from educational institution - Travel X/Y/Z 300x160x340 mm - Speed range 40-2000 rpm - Infinitely variable feed on all three axes - Rapid traverse on all three axes - Vertical head adjustable by 100 mm - Vertical and horizontal milling setup - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Kedpfxjw Rbxno Aabsnc Dimensions: LxWxH 1.3x1.2x1.7 meters / Weight 900 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal milling machine Deckel FP1 repowered by FPS in year of construction 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 55249/08 Year of construction 2010 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders Kjdpjwpi A Tsfx Aabsnc >> Milling cutters >> Operating manual >> Coolant device About the machine: A Deckel FP1 universal milling machine repowered by FPS in as-new condition is being offered. The accessories include a hydraulic vice with rotary plate, collets, tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: Ksdpfx Aju Nvwvjabonc >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan Kjdpju T D Nrsfx Aabonc To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 Ksdpfx Asu Racroabsnc >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: Knjdpfxjvb Ud Ue Aabsc >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device Knodpfx Ajwpi Dqeabsc About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Knsdpfx Aju Tuk Hjabjc Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock Kodpfjt Aarpsx Aabsnc >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.