Used 3 Axis Machining Center for sale (84,119)

Condition: used, Year of construction: 2014, controller manufacturer: Sonstige, controller model: Datron CNCv9, _____ Description: Year of manuf. : 2014 Control : Sonstige Datron CNCv9 Speed : 60000 rpm Movement X/Y/Z : 520/650/240 mm In Generel: Year of manufacture:2014 Control system:Datron CNCv9 Speed:6,000 - 60,000 rpm X/Y/Z:520/650/240 mm Spindle: Technology:HF spindle Speed range:6,000 - 60,000 rpm Tool holder:6 mm collet chuck Tool clamping:Automatic with compressed air NC rotary table: Technology:Precision axis Type:PDA 360 Centre height:102 mm Workpiece diameter max.:195 mm Chuck:3-jaw chuck, pneumatically actuated Hnedpfxsxfylnj Aabju Automation: Technology:Pick-and-place Lifting cylinder:Z-axis Gripper:1-fold gripper Workpiece carrier system:2x carrier plate Equipment: Tool magazine:15 stations Tool measurement:Tool setter Workpiece measurement:3D probe (X/Y/Z) Fire extinguishing system:Kraft & Bauer Set-up mode:Electronic handwheel Coolant system:Datron coolant system with ethanol

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Hnodexm Rn Aepfx Aabeu Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travels: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul due: 08/2025 Equipment: Swivel head -90 degrees to +90 degrees, indexed at 2.5-degree increments NC rotary table, brand SEMPUCO, 400 mm Spindle speed: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through spindle External coolant Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport details – see PDF. Illustration, content, and information provided without guarantee and therefore non-binding. All other accessories visible in the photos and videos are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only includes the accessories explicitly specified here, in the order confirmation, and on the invoice. FCA (Free Carrier – loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: December 2025 Subject to prior sale / Payment due immediately upon completion of purchase

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Hnsdpfx Aexgh H Nsabsu Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 2,370 mm, total length: 2,760 mm, total width: 2,760 mm, overall weight: 7,300 kg, spindle speed (max.): 12,000 rpm, For sale is a 5-axis machining center from Hermle, model U740. The machine is in excellent condition and immediately available for use, having only been employed for light machining operations. Service history: - 2022: new geared motor - 2023: new timing belt, new ball screw, angular contact ball bearing Technical data: Hnodpjwhpuaofx Aabou Year of manufacture: 2003 Control unit: Heidenhain TNC 530 Total spindle hours: 24,601 X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Max. spindle speed: 12,000 rpm Tool holder: SK 40* Tool changer: 16 positions Milling head: -5° to +95° Milling head automatic swivel and clamping Milling table: NC rotary table, 360° Compressed air through spindle center Dimensions: 2,760 x 2,390 x 2,370 mm Total weight: approx. 7,300 kg The offer also includes: Scraper conveyor Heidenhain probe Electronic hand control module Coolant gun Additional service pack installed on the control unit Transportation and loading can be organized on request, at extra cost, Europe-wide. All prices are subject to VAT. On-site inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Hsdpexf Nbrefx Aabenu Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: excellent (used), Year of construction: 2013, operating hours: 26,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, controller manufacturer: Heidenhain, controller model: ITNC 530 HSCI, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DMG MORI DMU 60 Evo Linear Year of manufacture: 2013 Hedpfxovv Nn Rj Aabonu Control: Heidenhain ITNC 530 HSCI Program run hours: 26,000h Technical data: Spindle speed: 20 – 18,000 min-1 Tool holder: SK 40 Tool magazine with 30 stations Through-spindle coolant (IKZ) with 40 bar Travel distances: X/Y/Z 600 mm x 500 mm x 500 mm NC rotary-swivel table 600 mm x 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° Accessories: Infrared probe TS 649 Blum laser tool measurement Coolant system IKZ with 40 bar Chip conveyor Electronic handwheel Operation mode 4

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828 D, _____ Description: Year of manuf. : 2021 Control : Siemens 828 D Speed : 12000 rpm Movement X/Y/Z : 550/550/510 mm Tool holder : SK40 Hnedpsxfflgjfx Aabju Spindle: Technology:Inline spindle Speed:12,000 rpm Power (max.):13 kW Tool holder:SK40 Work table: Clamping surface:850 x 650 mm Table load (max.):600 kg General: Tool magazine:24 stations with double gripper Rapid traverse in X/Y/Z:24 m/min Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ system with 20 bar Tool measurement:Renishaw, TS27R Workpiece measurement:Renishaw 3D measuring probe (infrared) Additional equipment:Mechanical preparation for oil mist separator

Condition: good (used), Year of construction: 2009, Machine will come with robot . Hedpfxexfu S Ns Aabonu 42.000 rpm

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, CNC control Heidenhain iTNC530 NC rotary tilt table right Fixed table on the left 30-fold tool changer el. handwheel IKZ (20 bar) chip conveyor Technische Daten / technical details: Travel X/ X-travel 1200 mm Traverse path rotary swivel range in X / X-travel rotary swivel side 500 mm X-travel fixed machine table area in X / X-travel fixed table side 570 mm Travel distance Y / Y-travel 650 mm Z-travel 520 mm A-axis / A-axis +90 / -110 ° C-axis / C-axis 360 ° Spindle taper SK40 Drehzahlbereich / spindle speed 30-8000 rpm Feed rate / infeed 0-45000 mm/min Hedpfjtu S Irex Aabsnu Schwenk-Rundtischababmaßen / swivel rotary table dimensions 520 x 420 mm interfering edge diameter 610 mm / interfering edge diameter 610 mm Höhe des Stützlageres / height of the support bearing 90 mm Fester Tisch Abmaße / fixed table dimensions 700 x 600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 30 Antriebbleistung / drive capacity 22 kW Gewicht ca. / weight 8500 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Collision monitoring DCM Collision (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Hnedpforuqp Dsx Aabju Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis travel (mm): +160° / -180° C axis travel (degrees): 360° Number of pallets: 1 Table diameter (mm): Ø500 Table load capacity (kg): 300 Cutting feed rate X/Y/Z (mm/min): 50,000 / 50,000 / 40,000 Rapid traverse max. X/Y/Z (m/min): 50 / 50 / 40 Main spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Spindle taper: BT-40 Torque (Nm): - Hnjdpjwv Sguefx Aabeu Tool changer type: Chain Magazine capacity (tools): 61 Max. tool diameter (mm): 90 Max. tool diameter with adjacent stations empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital units: Included Work light: Included Through-spindle cooling: Included Electronic handwheel on CNC panel: Included MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Hodpfx Aewb Trpeabonu Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Maho DMU 50 3rd Gen / 5 axes Year of manufacture: 2018, Control: Siemens 840 D SL Operate Total spindle hours: 1870, Travel X/Y/Z: 650/520/475 mm, 2-axis tilting rotary table Ø 630 x 500 mm, Tilting axis: -30° / +110°, Rotary axis: 360°, Direct measuring systems for B + C axis, Tool changer: 30 positions, SK 40, Spindle speed up to 15,000 rpm, Active spindle cooler, Direct measuring systems, Internal coolant supply (IKZ) 40 bar, Hnedpfx Aaoxmrwxebju Paper band filter, Chip conveyor, 3D measuring probe, Machine Protection Control, Coolant and compressed air switching via M function.

Condition: good (used), Year of construction: 2008, 5-axis CNC machining center Manufacturer: Willemin Model: W 408 MT Year: 2008 Control: Fanuc Series 16i MB Max workpiece diameter: 32 mm Spindle speed: up to 30,000 rpm Spindle interface: HSK-E40 48-position tool changer Hnjdpfoxdm Erex Aabsu 5 axes + gripper Travel distances: X 250 / Y 200 / Z 300 mm + Bar feeder LNS Hydrobar Express 332 + Coolant filtration system + Oil cooling / spindle cooling + High-pressure coolant (IKZ) Operating hours: approx. 75,000 hrs. Over the past years, more than €50,000 has been invested in the machine. Among others, the following parts were replaced/repaired: Main spindle - tool interface Spindle drawbar Tool changer gearbox Ball screws X/Y/Z/U axes Z-axis motor U-axis motor The machine has been regularly maintained and was fully integrated in production until recently.

Condition: used, Year of construction: 2004, Clamping area 630 x 500 mm X axis - 630 mm Hnjdpfx Ajxdfiisabsu Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Spindle taper ISO 40 Control: Mazatrol 640 M 5X Equipped with: Coolant through spindle (20 bar)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors Hsdpfx Aasw Nklhobenu - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, 5-axis machining center Alzmetall GS1000/5-T Hodpfx Aaexma D Hebonu New completely overhauled spindle directly from KESSLER HSK63, 18,000 rpm, 33 tool positions Torque drives in rotary axes A/C Heidenhain 530 control Year of manufacture 2008

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Hedjvvi Scopfx Aabsnu

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Hjdpfx Asr Nbzxsabenu Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Hodpfowz I Acsx Aabonu Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: good (used), Year of construction: 2006, operating hours: 39,121 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a machining center by Deckel Maho, model DMU 60 monoBlock. The machine is in good condition and ready for immediate operation. Technical specifications: Year of manufacture: 2006 Control: 3D Heidenhain 5 Control on-time: 78,478 h Program run time: 39,293 h Operating hours: 39,121 h Travel X-axis: 630 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Hsdpfx Asw I Emwoabonu Worktable (length x width): 1000 mm x 600 mm Max. workpiece weight: up to 550 kg Max. spindle speed: 12,000 rpm Tool holder: SK 40 Tool magazine: 24 positions Space requirements: approx. 3.5 m x 3.5 m x 2.5 m Transport and loading can be organized Europe-wide for an additional charge upon request. Prices excl. VAT. Viewing possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to get in touch, please visit our website.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Hnodpfx Aotrhq Hsabju Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 2011, Haas VF 3 optionally with automation, Year of manufacture 2011 / Automation 2005, Haas control, Travel X/Y/Z 1016/508/635 mm, Hjdpfxexltfuo Aabenu 40-position tool changer, BT 40 spindle taper, Spindle speed up to 10,000 rpm, Tool measurement, 3D probe, Automation interface, Automatic door, Oil mist extraction, Internal coolant supply, OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, Year 2005, 1 magazine – 20 pallets, 20 pallets System 3R GPS 240, Clamping plate 20 – M 10, Modular vise/clamping block, fixed block unit, Setup station, Zero-point clamping system 3R GPS 240,

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Hnedpfx Aevvi Spsabsu

Condition: good (used), Year of construction: 2007, Chiron Mill 800 5 Axis with Automation, Year of manufacture 2007, Siemens 840 D control, Travel X/Y/Z 800/550/550 mm, 2 axes NC swivel/rotary table, 65-position tool changer, HSK 63 spindle interface, Spindle speed up to 12,000 rpm, Chip conveyor, Internal coolant supply, Paper band filter, Tool laser measurement, 3D measuring probe, Interface for automation, Hjdpfjxlq E Ssx Aabenu Automatic door, Oil mist extraction, AUTOMATION OPTIONAL Automation System 3 R / SWE, Year 2008, Zero-point clamping system 3 R GPS 240, 12 pallets System 3 R GPS 240, 6 mechanical centric vices Spreitzer MZS 260 - 125 A, 12 pallets System 3 R GPS 240, 6 mechanical centric vices MZU 170 - 60,